BenQ Bl902tm User Manual

							LCD Monitor
User Manual
BL902TM
 
						

							Copyright
Copyright © 2013 by BenQ Corporation. All rights reserved. No part of this publication may be 
reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language 
or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, 
chemical, manual or otherwise, without the prior written permission of BenQ Corporation.
Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or implied, with 
respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness 
for any particular purpose. Further, BenQ Corporation reserves the right to revise this publication 
and to make changes from time to time in the contents hereof without obligation of BenQ 
Corporation to notify any person of such revision or changes.
The performance of flicker-free may be affected by external factors such as poor cable quality, 
unstable power supply, signal interference, or poor grounding, and not limited to the above 
mentioned external factors. (Applicable for flicker-free models only.)
Please follow these safety instructions for best performance, 
and long life for your monitor
Power Safet y
•The AC plug isolates this equipment from the AC supply.
•The power supply cord serves as a power disconnect device for pluggable equipment. The 
socket outlet should be installed near the equipment and be easily accessible.
•This product should be operated from the type of power indicated on the marked label. If you 
are not sure of the type of power available, consult your dealer or local power company.
•An approved power cord greater or equal to H03VV-F or H05VV-F, 2G or 3G, 0.75mm2 must 
be used.
Care And Cleaning
•Cleaning. Always unplug your monitor from the wall outlet before cleaning. Clean the LCD 
monitor surface with a lint-free, non-abrasive cloth. Avoid using any liquid, aerosol or glass 
cleaners.
•Slots and openings on the back or top of the cabinet are for ventilation. They must not be 
blocked or covered. Your monitor should never be placed near or over a radiator or heat 
source, or in a built-in installation unless proper ventilation is provided.
•Never push objects or spill liquid of any kind into this product.
Servicing
Do not attempt to service this product yourself, as opening or removing covers may expose you to 
dangerous voltages or other risks. If any of the above mentioned misuse or other accident such as 
dropping or mishandling occurs, contact qualified service personnel for servicing.
 
						

							Table of Contents
Copyright .......................................................................................................................... 2
Disclaimer ......................................................................................................................... 2
Getting started  .................................................................................................................. 4
Getting to know your monitor  ........................................................................................ 6
Front view ........................................................................................................................................6
Back view  .........................................................................................................................................6
How to assemble your monitor hardware ...................................................................... 7
Adjusting the monitor stand height  .............................................................................................11
Rotating the monitor  ....................................................................................................................12
Viewing angle adjustment .............................................................................................................13
How to detach the stand base  .......................................................................................................13
Using the monitor wall mounting kit  ..........................................................................................14
Getting the most from your BenQ monitor ................................................................. 15
How to install the monitor on a new computer  ..........................................................................16
How to upgrade the monitor on an existing computer  ..............................................................17
How to install on Windows 8 system  ...........................................................................................18
How to install on Windows 7 system  ...........................................................................................19
How to install on Windows Vista systems  ...................................................................................20
Picture optimization ...................................................................................................... 21
How to adjust your monitor .......................................................................................... 22
The control panel  ..........................................................................................................................22
Hot key mode  ................................................................................................................................23
Main menu mode  ..........................................................................................................................24
Troubleshooting ............................................................................................................. 37
Frequently asked questions (FAQ)  ...............................................................................................37
Need more help?  ............................................................................................................................38
 
						

							4  Getting started  
1. Getting started
When unpacking please check you have the following items. If any are missing or damaged, please 
contact the place of purchase for a replacement.
 
BenQ LCD Monitor
Monitor Base
Quick Start Guide
 
CD-ROM
 
Power Cord
(Picture may differ from product 
supplied for your region.)
Video Cable: D-Sub 
 
						

							  5   Getting started
Consider keeping the box and packaging in storage for use in the future when you may need to transport 
the monitor. The fitted foam packing is ideal for protecting the monitor during transport.
Video Cable: DVI-D 
(Optional accessory for models with 
DVI inputs, sold separately)
Audio Cable
 
						

							6  Getting to know your monitor  
2. Getting to know your monitor
Front view
Back view
1. Power button
2. Control buttons
3. Speakers
4. AC Power Input jack
5. Line In
6. Headphone jack
7. Cable clip
8. DVI-D socket 
9. D-Sub socket
10.Lock switch
1233
41056897
• Above diagram may vary depending on the model.
• Picture may differ from product supplied for your region.
 
						

							  7   How to assemble your monitor hardware
3. How to assemble your monitor hardware
If the computer is turned on you must turn it off before continuing. 
Do not plug-in or turn-on the power to the monitor until instructed to do so.
1. Attach the monitor base.
Please be careful to prevent damage to the monitor. 
Placing the screen surface on an object like a stapler or a 
mouse will crack the glass or damage the LCD substrate 
voiding your warranty. Sliding or scraping the monitor 
around on your desk will scratch or damage the monitor 
surround and controls. 
Protect the monitor and screen by clearing a flat open area 
on your desk and placing a soft item like the monitor 
packaging bag on the desk for padding.
Gently lay the screen face down on a flat clean padded 
surface.
While holding the monitor firmly against the desk, pull 
the monitor stand arm upwards clear of the monitor. 
Orient and align the stand base socket with the end of the 
stand arm, then push them together. Tighten the 
thumbscrew on the bottom of the monitor base as 
illustrated. 
Gently attempt to pull them back apart to check that they 
have properly engaged.
Carefully lift the monitor, turn it over and place it upright 
on its stand on a flat even surface.
 
Extend the stand to the maximum extended position. And 
rotate the monitor 90 degrees counterclockwise as 
illustrated.
 
						

							8  How to assemble your monitor hardware  
You might want to adjust the monitor stand height. See 
Adjusting the monitor stand height on page 11 for 
more information.
You should position the monitor and angle the screen to 
minimize unwanted reflections from other light sources.
2. Connect the PC video cable 
Do not use both DVI-D cable and D-Sub cable on the 
same PC. The only case in which both cables can be 
used is if they are connected to two different PCs with 
appropriate video systems. (Not available for analog-only 
models).
To Connect the D-Sub Cable
Connect the plug of the D-Sub cable (at the end without 
the ferrite filter) to the monitor video socket. Connect the 
other end of the cable (at the end with the ferrite filter) to 
the computer video socket.
Tighten all finger screws to prevent the plugs from 
accidently falling out during use.
-5O~ +20O
Either
 
						

							  9   How to assemble your monitor hardware
To Connect the DVI-D Cable
Connect the plug of the DVI-D cable (at the end without 
the ferrite filter) to the monitor video socket. Connect the 
other end of the cable (at the end with the ferrite filter) to 
the computer video socket.
Tighten all finger screws to prevent the plugs from 
accidently falling out during use.
The DVI-D format is used for direct digital connection 
between source video and digital LCD monitors or 
projectors. The digital video signals produce a superior 
quality picture than analog video signals.
The video cable included in your package and the socket 
illustrations on the right may vary depending on the LCD 
model.
3. Connect the audio cable.
Connect the audio cable between the socket on the rear of 
the monitor (Line In) and your computer audio outlet. 
You may connect headphones to the headphone jack 
found next to the Line In jack of the monitor.
4. Connect the power cable to the monitor.
Plug one end of the power cord into the socket labelled 
‘POWER IN’ on the rear of the monitor. Do not connect 
the other end to a power outlet just yet. 
Or
 
						

							10  How to assemble your monitor hardware  
5. Route the cables via the cable clip.
6. Connect-to and turn-on the power.
Plug the other end of the power cord into a power outlet 
and turn it on.
Picture may differ from product supplied for your region.
Turn on the monitor by pressing the power button on the 
right of the monitor. 
Turn on the computer too, and follow the instructions in 
Section 4: Getting the most from your BenQ monitor on 
page 15 to install the monitor software.