BenQ Bl2710pt User Manual

							  21   How to assemble your monitor hardware
Using the monitor wall mounting kit
The back of your LCD monitor has a VESA standard mount with 100mm pattern, allowing the 
installation of a wall mount bracket. Before starting to install a monitor wall mounting kit, 
please read the precautions carefully.
Precautions
• Install your monitor and monitor mounting kit on a wall with flat surface.
• Ensure that the wall material is stable to support the weight of the monitor.
• Turn off the monitor and the power before disconnecting the cables from the LCD monitor.
1. Remove the monitor stand.
Lay the screen face down on a clean and well-padded 
surface. Detach the monitor stand as instructed in step 
1~2 in How to detach the stand and the base on page 
16.
2. Remove the screws on the back cover.
Use a cross-pointed screwdriver to release the screws 
on the back cover. The use of a magnetic-head 
screwdriver is recommended to avoid of losing the 
screws.
In case you intend to use your monitor on the stand in the 
future, please keep the monitor base, monitor stand, and 
screws somewhere safe for future use.
3. Follow the instruction manuals of the wall 
mount bracket you purchased to complete 
the installation.
 
						

							22  Getting the most from your BenQ monitor  
Getting the most from your BenQ monitor
To gain the most benefit from your new BenQ LCD monitor, you should install the custom 
BenQ LCD Monitor driver software as provided on the BenQ LCD Monitor CD-ROM.
The circumstances under which you connect and install your BenQ LCD Monitor will 
determine which process you need to follow to successfully install the BenQ LCD Monitor 
driver software. These circumstances relate to which version of Microsoft Windows you are 
using, and whether you are connecting the monitor and installing the software onto a new 
computer (without existing monitor driver software), or whether you are upgrading an existing 
installation (which already has existing monitor driver software) with a newer monitor.
In either case however, the very next time you turn on your computer (after connecting the 
monitor to your computer), Windows will automatically recognize the new (or different) 
hardware, and will launch its 
Found New Hardware wizard.
Follow the wizard instructions until it asks you to select a monitor model. At that point, click 
the 
Have Disk button, insert the BenQ LCD Monitor CD-ROM and select the appropriate 
monitor model. Further details and step-by-step instructions for either an automatic (new) or 
upgrade (existing) installation, see:
• How to install the monitor on a new computer on page 23.
• How to upgrade the monitor on an existing computer on page 24.
• If you require a User Name and Password to login to your Windows computer, you must be logged on as an 
Administrator or as a member of the Administrators group in order to install the monitor driver software. 
Furthermore, if your computer is connected to a network which has security access requirements, network 
policy settings may prevent you from installing software on your computer.
• To check the name of the purchased model, refer to the specification label on the back of the monitor.
 
						

							  23   Getting the most from your BenQ monitor
How to install the monitor on a new computer
This instruction details the procedure for selecting and installing the BenQ LCD Monitor driver 
software on a new computer which has never had a monitor driver installed before. This 
instruction is only suitable for a computer which has never been used before, and for which the 
BenQ LCD Monitor is the first ever monitor to be connected to it.
1.  Follow the instructions in Getting the most from your BenQ monitor on page 22. 
When Windows starts, it will automatically detect the new monitor and launch the Found New 
Hardware Wizard. Follow the prompts until it displays the option to Install Hardware Device 
Drivers.
2.  Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer.
3.  Check 
Search for a suitable driver for my device option, and click Next.
4.  Check the option for CD-ROM drives (uncheck all others) and click 
Next.
5.  Look to confirm that the wizard has selected the correct name of your monitor and click 
Next.
6.  Click 
Finish.
7.  Restart the computer.
If you are adding the BenQ LCD Monitor to an existing computer that has already had another monitor 
connected to it (and has monitor driver software installed), you should not be following these instructions. You 
should instead be following the instructions for How to upgrade the monitor on an existing computer.
To find the suitable driver files for the purchased model, refer to the following table.
Driver filesSuitable models
BL2410 BL2410PT
BL2710 BL2710PT / BL2710PE / BL2710PH
 
						

							24  Getting the most from your BenQ monitor  
How to upgrade the monitor on an existing computer
This instruction details the procedure for manually updating the existing monitor driver 
software on your Microsoft Windows computer. It is currently tested as compatible for 
Windows 8 and Windows 7 Operating System (OS). 
Installing monitor driver software involves selecting an appropriate information file (.inf) on the 
BenQ LCD Monitor CD-ROM for the particular model monitor you have connected, and 
letting Windows install the corresponding driver files from the CD. You need only steer it in the 
right direction. Windows has an Upgrade Device Driver Wizard to automate the task and guide 
you through the file selection and installation process. 
See:
• How to install on Windows 8 system on page 25.
• How to install on Windows 7 system on page 26.
The BenQ LCD Monitor driver for your model may well function perfectly with other versions of Windows, 
however, as at the time of writing, BenQ has done no testing of this driver on other versions of Windows and 
cannot guarantee its operation on those systems.
 
						

							  25   Getting the most from your BenQ monitor
How to install on Windows 8 system
1.  Open Display Properties.
Move the cursor to the lower-right of the screen or press the Windows + C buttons on the 
keyboard to bring up the Charm bar. Go to Settings, Control Panel, Devices and Printers 
and right-click the name of your monitor from the menu.
Alternatively, right-click the desktop and select Personalize, Display, Devices and Printers, 
and right-click the name of your monitor from the menu.
2.  Select Properties from the menu.
3.  Click the 
Hardware tab.
4.  Click 
Generic PnP Monitor, and then the Properties button.
5.  Click the 
Driver tab and the Update Driver button.
6.  Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer.
7.  In the 
Update Driver Software window, select the option Browse my computer for 
driver software
.
8.  Click 
Browse and navigate to the following directory: d:\BenQ_LCD\Driver (where d is 
the drive letter designator for the CD-ROM drive).
9.  Select the correct folder name of your monitor from provided driver list, and click 
Next.
This will copy and install the appropriate monitor driver files to your computer.
10. Click Close.
You may be prompted to restart your computer after the driver update is complete.
The drive letter for your CD drive may differ from the example above depending upon your system - it may be 
D: or E: or F: etc.
 
						

							26  Getting the most from your BenQ monitor  
How to install on Windows 7 system
1.  Open Display Properties.
Go to Start, Control Panel, Hardware and Sound, Devices and Printers and right-click the 
name of your monitor from the menu.
Alternatively, right-click the desktop and select Personalize, Display, Devices and Printers, 
and right-click the name of your monitor from the menu.
2.  Select Properties from the menu.
3.  Click the 
Hardware tab.
4.  Click 
Generic PnP Monitor, and then the Properties button.
5.  Click the 
Driver tab and the Update Driver button.
6.  Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer.
7.  In the 
Update Driver Software window, select the option Browse my computer for 
driver software
.
8.  Click 
Browse and navigate to the following directory: d:\BenQ_LCD\Driver (where d is 
the drive letter designator for the CD-ROM drive).
9.  Select the correct folder name of your monitor from provided driver list, and click 
Next.
This will copy and install the appropriate monitor driver files to your computer.
10. Click Close.
You may be prompted to restart your computer after the driver update is complete.
The drive letter for your CD drive may differ from the example above depending upon your system - it may be 
D: or E: or F: etc.
 
						

							  27   How to adjust your monitor
How to adjust your monitor
The control panel
No.NameDescription
1.   Control keys Accesses the functions or menu items displayed on the screen, 
right next to each key.
2.   Power key Turns the power on or off.
12
The control keys are embedded in a touchpad and are indicated by the LED indicators. Touch of an LED indicator 
represents pressing the corresponding control key.
 
						

							28  How to adjust your monitor  
Basic menu operation
All OSD (On Screen Display) menus can be accessed by the control keys. You can use the OSD 
menu to adjust all the settings on your monitor.
1.  Press any of the control keys.
2.  The hot key menu is displayed. The left three controls are custom keys and are designated 
for particular functions.
3.  Select 
Menu to access the main menu.
4.  In the main menu, follow the icons next to the control keys to make adjustments or 
selection. See Navigating the main menu on page 32 for details on the menu options.
No.OSD in hot key 
menuOSD icon 
in main 
menu
Function
Custom Key 1• By default, the key is the hot key for Picture Mode. 
To change the default settings, see Customizing the 
hot keys on page 30.
• For Up/Increase adjustment.
12
3 4
 
						

							  29   How to adjust your monitor
Controlling the display with Display Pilot
The provided Display Pilot software on the CD is an alternative to control the display. The 
main functions include:
• Control of the OSD menus.
• Setup of rotating the display with the monitor automatically (see page 19).
For more information, go to 
System > Options > User Manual in Display Pilot.
Custom Key 2  • By default, the key is the hot key for Input. To change 
the default settings, see Customizing the hot keys on 
page 30.
• For Down/Decrease adjustment.
Custom Key 3 
 / • By default, the key is the hot key for Vo l u m e. To 
change the default settings, see Customizing the hot 
keys on page 30.
• Enters sub menus.
• Selects menu items.
Menu  • Activates the main menu.
• Returns to the previous menu.
Exit Exits OSD menu.
No.OSD in hot key 
menuOSD icon 
in main 
menu
Function
• OSD = On Screen Display.
The hot keys only operate while the main menu is not currently displaying. Hot key displays will disappear after 
a few seconds of no key activity.
• To unlock the OSD controls, press and hold any key for 10 seconds.
 
						

							30  How to adjust your monitor  
Picture optimization
The easiest way to obtain an optimal display from an analog (D-Sub) input is to use the Auto 
Adjustment
 function. Go to Display and Auto Adjustment to optimize the currently displayed 
image to the screen.
If you wish, you can always adjust the screen geometric settings manually using geometry menu 
items. To assist you in this endeavour, BenQ has provided a screen test image utility which you 
can use to check for screen color, grayscale and line gradient display.
1.  Run the test program auto.exe from CD-ROM. You could also use any other image, such as 
the desktop of your operating system. However, we recommend that you use auto.exe. As 
you run auto.exe, a test pattern displays.
2.  Press any of the control keys to bring up the hot key menu. Select 
Menu to enter the main 
menu.
3.  Go to 
Display and Auto Adjustment.
4.  If you notice a vertical noise (like a curtain effect-shimmering of vertical lines), select 
Pixel 
Clock
 and adjust the monitor until the noise disappears.
5.  If you notice a horizontal noise, select 
Phase and adjust the monitor until the noise 
disappears.
Customizing the hot keys
The left 3 control keys (also called custom keys) perform as hot keys to provide direct access 
to pre-defined functions. You can change the default setting and designate different functions for 
these keys.
1.  Press any of the control keys to bring up the hot key menu, and press 
Menu to access the 
main menu.
2.  Go to 
System.
3.  Select the custom key you want to change.
4.  In the sub menu, select a function that can be accessed by this key. A pop-up message will 
appear, showing that the setup is complete.
Adjusting display mode
To display images of aspect ratio other than 16:9 and size other than the panel size of your 
purchased model, you can adjust the display mode on the monitor.
1.  Press any of the control keys to bring up the hot key menu, and press 
Menu to access the 
main menu.
2.  Go to 
Picture Advanced and Display Mode.
3.  Select an appropriate display mode. The setting will take effect immediately.
When you connect a digital input signal using a digital (DVI, HDMI, or DP) cable to your monitor, the Auto 
Adjustment
 function will be disabled, because the monitor will automatically display the best image.
Please ensure that the connected graphic card on your computer is set to the native resolution of the monitor 
when you use the 
Auto Adjustment function.