BenQ Bl2700ht User Manual

BL Series
LCD Monitor
User Manual
 

2   
Copyright
Copyright © 2014 by BenQ Corporation. All rights reserved. No part of this publication may 
be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any 
language or computer language, in any form or by any means, electronic, mechanical, magnetic, 
optical, chemical, manual or otherwise, without the prior written permission of BenQ 
Corporation.
Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or implied, with 
respect to...

  3
Servicing
Do not attempt to service this product yourself, as opening or removing covers may expose 
you to dangerous voltages or other risks. If any of the above mentioned misuse or other 
accident such as dropping or mishandling occurs, contact qualified service personnel for 
servicing.
BenQ ecoFACTS
BenQ has been dedicated to the design and development of greener product as part of its 
aspiration to realize the ideal of the Bringing Enjoyment N Quality to Life corporate vision 
with the ultimate...

4   
Table of Contents
Copyright ......................................................................................................................................2
Getting started  .............................................................................................................................5
Getting to know your monitor ................................................................................................7
Front view...

  5   Getting started
Getting started
When unpacking please check you have the following items. If any are missing or damaged, 
please contact the place of purchase for a replacement.
 
BenQ LCD Monitor
Monitor Stand
Monitor Base
Quick Start Guide
 
CD-ROM
 
Power Cord
(Picture may differ from product supplied 
for your region.)
 

6  Getting started  
Video Cable: D-Sub 
Video Cable: DVI-D
(Optional accessory, sold separately)
Video Cable: HDMI
(Optional accessory for models with HDMI 
inputs, sold separately)
Audio Cable
Cable Clip
(Optional accessory)
• Available accessories and the pictures shown here may differ from the actual contents and the product supplied 
for your region. For cables that are not supplied with your product, you can purchase them separately.
• Consider keeping the box and packaging in storage for use in...

  7   Getting to know your monitor
Getting to know your monitor
Front view
Back view 
1.  Power button
2.  Control buttons
3.  AC power input jack
4.  Audio Line In
5.  Headphone jack
6.  HDMI socket
7.  DVI-D socket
8.  D-Sub socket
9.  Kensington lock slot
18723 4
569
• Above diagram may vary depending on the model.
• Picture may differ from product supplied for your region.
 

8  How to assemble your monitor hardware  
How to assemble your monitor hardware
 • If the computer is turned on you must turn it off before continuing. 
Do not plug-in or turn-on the power to the monitor until instructed to do so.
• The following illustrations are for your reference only. The location and available input and output jacks may 
vary depending on the purchased model.
1. Attach the monitor base.
Please be careful to prevent damage to the monitor. Placing the screen surface on an object like...

  9   How to assemble your monitor hardware
Rotate the turntable on the bottom of the monitor base 
until you see the thumbscrew ( ).
Tighten the thumbscrew on the bottom of the monitor 
base as illustrated ( ). 
To secure or release a screw, a screwdriver or a coin is 
required.
Gently attempt to pull them back apart to check that 
they have properly engaged.
Carefully lift the monitor, turn it over and place it 
upright on its stand on a flat even surface.
Extend the monitor to the maximum extended...

10  How to assemble your monitor hardware  
2. Connect the PC video cable
Do not use both DVI-D cable and D-Sub cable on the same 
PC. The only case in which both cables can be used is if they 
are connected to two different PCs with appropriate video 
systems.
To Connect the D-Sub Cable
Connect the plug of the D-Sub cable (at the end 
without the ferrite filter) to the monitor video socket. 
Connect the other end of the cable (at the end with the 
ferrite filter) to the computer video socket.
Tighten...