Home > Belkin > Router > Belkin Router Surf Wireless User Manual

Belkin Router Surf Wireless User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Belkin Router Surf Wireless User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 19 Belkin manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							21
    TROUbles HOOTInG, sUPPORT , anD Wa RRanTY
    I ’ve  inst alle d  this  new  Router  and  some  of  my  net work  clients (computers, game consoles, etc  .) are now unable to connect  .
    Your new Router came pre - configured with a net work name and password, found printed on an at tached card  . All clients must use this network name and password to connect wirelessly to your Router  . You will need to find the net work set tings on your client, select the net work name printed on the card from the list of available net works, and enter the password when prompted to join the wireless network  .
    limiting the wireless transmit rate—Limiting the wireless transmit rate can help improve range and connection stabilit y  . Most wireless cards have the abilit y to limit the transmission rate  . To change this proper t y in Windows, go to the Windows Control Panel, open “ Net work Connections”, and double - click on your wireless card’s connection  . In the proper ties dialog, select the “ Configure” but ton on the “ General ” tab, then choose the “Advanced” tab and select the rate property  .
    Wireless client cards are usually set to automatically adjust the wireless transmit rate for you, but doing so can cause periodic disconnects when the wireless signal is too weak; as a rule, slower transmission rates are more stable . E xperiment with dif ferent connection rates until you find the best one for your environment .  Note that all available transmission rates should be acceptable for browsing the Internet  . For more assistance, see your wireless card’s user manual  . 
    						
    							22
    TROUbles HOOTInG, sUPPORT , anD Wa RRanTY
    Does the Router support Wireless Protected  access (WP a) security?
    The Router ships with WPA / WPA 2 securit y turned on  . Windows XP and some older net work hardware may require a software update to support WPA / WPA2 .
    I am having difficulty setting up WPa security on my Router  .
    1 . Log in to your Router by visiting http://router/ with your web browser  . Click on the “Login” button in the top right-hand corner of the screen  . You will be asked to enter your password  . If you have never set a password, leave the “Password” field blank and click “Submit”  .
    2 . Click “ Wireless” in the lef t- hand menu  . Then click “Security” just below that .
    3 . Select the “WPA/WPA2” option  .
    4 . Enter a password  . This can be from 8 – 63 character s of your choice, including spaces and punctuation, OR a 6 4 - digit hexadecimal number (using only the numbers 0–9 and letters A–F)  .
    5 . Click “Apply Changes” to finish  . Your wireless connection is now encrypted  . Each computer using your wireless network will need to use the new key  .
    note: If you are configuring the Router over a wireless connection, you will have to re - connect to the Router after changing any security settings  .
    note: Some older net work ing hardware suppor ts only WEP encr yption  . If your older computer s cannot connect to your net work, tr y 128 - bit or 6 4 - bit WEP, or seek software updates from their manufacturers  . 
    						
    							23
    TROUbles HOOTInG, sUPPORT , anD Wa RRanTY
    I  am  having  dif ficult y  set t ing  up  Wire d  equivalent Privacy (W eP) security on my Router  .
    1 . Log in to your Router  . Visit http://router/ with your web browser  . Click on the “Login” button in the top right-hand corner of the screen  . You will be asked to enter your password  . If you have never set a password, leave the “Password” field blank and click “Submit”  .
    2 . Click “ Wireless” in the lef t- hand menu  . Then click “Security” just below that .
    3 . Select the “128-bit WEP” option  .
    4 . You may t ype in a WEP key manually, or generate one from a passphrase  . Type a phrase in the “ Passphrase” field and click the “ Generate” but ton  . A WEP key is composed of 26 hexadecimal digits (0–9, A–F . . For example, C3 03 0F AF 4B B2 C3 D4 4B C3 D4 EE 74 is a valid 128-bit WEP key  .
    5 . Click “Apply Changes” to finish  . Your wireless activit y is now encr ypted  . Each computer using your wireless network will need to use the new key  .
    note: If you are configuring the Router over a wireless connection, you will have to re - connect to the Router after changing any security settings  .
    note: Some older net work ing hardware suppor ts only 6 4 - bit WEP encr yption  . If your older computer s cannot connect to your network, try 64-bit WEP  . 
    						
    							24
    TROUbles HOOTInG, sUPPORT , anD Wa RRanTY
    Technical  support
    You can find technical-support information on our website, www  .belkin  .com, by navigating to the tech -suppor t section  . 
    If you want to contact technical suppor t by phone, please call the number you need from the list below*: 
    *Local rates apply .
    CountrynumberInternet adressAUSTRIA0820 200766www  .belkin  .com/de/networking/
    BELGIUM07 07 00 073www  .belkin  .com/nl/networking/ www  .belkin  .com/fr/networking/
    CZECH REPUBLIC239 000 406www  .belkin  .com/uk/networking/
    DENMARK701 22 403www  .belkin  .com/uk/networking/
    FINLAND0972519123www  .belkin  .com/uk/networking/
    FRANCE08 - 25 54 00 26www  .belkin  .com/fr/networking/
    GERMANY0180 - 500 57 09www  .belkin  .com/de/networking/
    GREECE00800 - 44 14 23 90www  .belkin  .com/uk/networking/
    HUNGARY06 - 17 77 49 06www  .belkin  .com/uk/networking/
    ICELAND800 8534www  .belkin  .com/uk/networking/
    IRELAND0818 55 50 06www  .belkin  .com/uk/networking/
    I TA LY02 - 69 43 02 51www  .belkin  .com/it/networking/
    LUXEMBOURG34 20 80 85 60www  .belkin  .com/uk/networking/
    NETHERLANDS0900 - 040 07 90    €0  .10 per minutewww  .belkin  .com/nl/networking/
    N O R WAY81 50 0287www  .belkin  .com/uk/networking/
    POLAND00800 - 441 17 37www  .belkin  .com/uk/networking/
    PORTUGAL707 200 676www  .belkin  .com/uk/networking/
    RUSSIA495 580 9541www  .belkin  .com/networking/
    SOUTH AFRICA0800 - 99 15 21www  .belkin  .com/uk/networking/
    SPAIN902 - 02 43 66www  .belkin  .com/es/networking/
    SWEDEN07 - 71 40 04 53www  .belkin  .com/uk/networking/
    SWITZERLAND08 - 48 00 02 19www  .belkin  .com/de/networking/www  .belkin  .com/fr/networking/
    UNITED KINGDOM0845 - 607 77 87www  .belkin  .com/uk/networking/
    OTHER COUNTRIES+44 - 1933 35 20 00 
    						
    							25
    TROUbles HOOTInG, sUPPORT , anD Wa RRanTY
    belkin  International,  Inc  .,  l imited 2-Year Product Warranty
    What this warranty covers  .Belk in International, Inc . (“ Belk in”) warrants to the original purchaser of this Belkin product that the product shall be free of defects in design, assembly, material, or workmanship  .
    What the period of coverage is .Belkin warrants the Belkin product for two years  .
    What will we do to correct problems?Product Warranty .Belk in will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product)  . Belkin reserves the right to discontinue any of its products without notice, and disclaims any limited warrant y to repair or replace any such discontinued products . In the event that Belk in is unable to repair or replace the product (for example, because it has been discontinued), Belk in will of fer either a refund or a credit toward the purchase of another product from Belk in  .com in an amount equal to the purchase price of the product as evidenced on the original purchase receipt as discounted by its natural use  .
    What is not covered by this warranty?All above warranties are null and void if the Belkin product is not provided to Belk in for inspection upon Belk in’s request at the sole expense of the purchaser, or if Belk in determines that the Belk in product has been improperly installed, altered in any way, or tampered with . The Belk in Product Warrant y does not protect against acts of God such as flood, lightning, ear thquake, war, vandalism, thef t, normal - use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (i  .e  . brownouts or sags), non -authorized program, or system equipment modification or alteration  . 
    						
    							26
    TROUbles HOOTInG, sUPPORT , anD Wa RRanTY
    How to get service .To get ser vice for your Belk in product you must take the following steps:
    1 . Contact Belk in Tech Suppor t at the number listed on page 24, within 15 days of the Occurrence  . Be prepared to provide the following information:
      a .  
    The part number of the Belkin product .  b .  
    Where you purchased the product .  c .  
    When you purchased the product .  d .  
    Copy of original receipt .
    2 . Your Belk in Customer Ser vice Representative will then instruct you on how to for ward your receipt and Belk in product and how to proceed with your claim  .
    Belkin reserves the right to review the damaged Belkin product .  All costs of shipping the Belk in product to Belk in for inspection shall be borne solely by the purchaser . If Belk in determines, in its sole discretion, that it is impractical to ship the damaged equipment to Belk in, Belk in may designate, in its sole discretion, an equipment repair facilit y to inspect and estimate the cost to repair such equipment  . The cost, if any, of shipping the equipment to and from such repair facilit y and of such estimate shall be borne solely by the purchaser  . Damaged equipment must remain available for inspection until the claim is finalized  . Whenever claims are set tled, Belk in reser ves the right to be subrogated under any existing insurance policies the purchaser may have  . 
    						
    							27
    TROUbles HOOTInG, sUPPORT , anD Wa RRanTY
    How state law relates to the warranty  .THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BELKIN . THERE ARE NO OTHER WARRANTIES, EXPRESSED OR, E XCEP T AS REQUIRED BY L AW, IMPLIED, INCLUDING THE IMPLIED WARR ANT Y OR CONDITION OF QUALIT Y, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND SUCH IMPLIED WARR ANTIES, IF ANY, ARE LIMITED IN DURATION TO THE TERM OF THIS WARRANTY  .
    Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you .
    IN NO E VENT SHALL BELKIN BE LIABLE FOR INCIDENTAL , SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH AS, BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS ARISING OUT OF THE SALE OR USE OF ANY BELKIN PRODUCT, E VEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES . 
    This warranty gives you specific legal rights, and you may also have other rights, which may var y from state to state  . Some states do not allow the exclusion or limitation of incidental, consequential, or other damages, so the above limitations may not apply to you  . 
    						
    							28
    ReGUla TORY InfORM aTIOn
    fCC  statement
    DeC l a RaTIO n  O f  CO nfORMIT Y  WITH  fCC  RU les fOR  ele CTROM aG ne TIC COMP aTI bIl ITYWe, Belk in International, Inc  ., of 501 West Walnut Street, Compton, CA 9 0220, declare under our sole responsibilit y that the device, F 7D13 01 v1, complies with Par t 15 of the FCC Rules  . Operation is subject to the following t wo conditions: (1) this device may not cause harmful inter ference, and (2) this device must accept any inter ference received, including interference that may cause undesired operation  .  
    Caution:  exposure to Radio  frequency Radiation  .The device shall be used in such a manner that the potential for human contact normal operation is minimized
    This equipment complies with FCC radiation exposure limits set for th for an uncontrolled environment  . This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body  .
    federal Communications Commission  noticeThis equipment has been tested and found to comply with the limits for a Class B digital device, pur suant to Par t 15 of the FCC Rules  . These limits are designed to provide reasonable protection against harmful interference in a residential installation  .
    This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful inter ference to radio communications  . However, there is no guarantee that interference will not occur in a par ticular installation . If this equipment does cause harmful inter ference to radio or television reception, which can be determined by turning the equipment of f and on, the user is encouraged to tr y and correct the interference by one or more of the following measures:
    •	 Reorient 	or 	relocate 	the 	receiving 	antenna.	•	 Increase 	the 	distance 	between 	the 	equipment 	and 	the 	receiver. 	•		
    Connect 	the 	equipment 	to 	an 	outlet 	on 	a 	circuit 	dif ferent	from that to which the receiver is connected  . •	 Consult	the 	dealer 	or 	an 	experienced 	radio/TV 	technician 	for 	help.•	 	
    FCC 	Caution: 	Any 	changes 	or 	modifications 	not 	expressly	approved by the par t y responsible for compliance could void the user’s authority to operate this equipment .
    This device and its antenna(s) must not be co - located or operating in conjunction with any other antenna or transmitter  . 
    						
    							29
    ReGUla TORY InfORM aTIOn
    Canada-Industry Canada (IC)The wireless radio of this device complies with RSS 139 & RSS 210 Industr y Canada  . This Class B digital apparatus complies with Canadian ICES-003  .
    Operation is subject to the following t wo conditions: (1) this device may not cause inter ference, and (2) this device must accept any inter ference, including inter ference that may cause undesired operation of the device  .
    Cet appareil numérique de la classe B conforme á la norme NMB-003 du Canada .
    europeEuropean Union Radio products with the CE or CE alert mark ing comply with the R&T TE Directive (1999/5/ EC) issued by the Commission of the European Communit y  . 
    Compliance with this directive implies conformit y to the following European Norms (in brackets are the equivalent international standards) . 
    •		
    EN	6 0 950 -1:20 0 6 	(IEC6 0 950 -1) 	– 	Product 	Safet y	•	 	
    EN	3 0 0 	328 	Technical 	requirement 	for 	radio 	equipment	•	 	
    ETS 	301 	489 	General 	EMC 	requirements 	for 	radio 	equipment.
    InformationProducts with the CE marking comply with the EMC Directive (2004/108/EC) and the Low Voltage Directive (2006/95/EC) issued by the Commission of the European Communit y  . Compliance with these directives implies conformit y to the following European Product Family Standards .
    •		
    EN	55022 	(CISPR 	22) 	– 	Electromagnetic 	Inter ference	•	 	
    EN	55024 -1 	– 	Electromagnetic 	Immunit y	•	 	
    EN	 61000-3-2	 (IEC610000-3-2)	 –	Power	 Line	Harmonics 	•		
    EN	610 0 0 - 3 - 3 	(IEC610 0 0 0) 	– 	Power 	Line 	Flicker	•	 	
    EN	 60950-1	 (IEC60950-1)	 –	Product	 Safety
    Products that contain the radio transmit ter are sometimes labeled with the Notified Body number (CE0 56 0) or CE aler t mark ing if the standard used in the conformit y is not harmonized across the European Communit y  .  
    						
    							30
    ReGUla TORY InfORM aTIOn
    OPERATES ON CHANNELS 1-13
    BEATCZCYITIESKPTSEPLESSIEEHUGRDKLVLULTNLMTRONOCHBGTR
    DEFRFIGBISLIFOR USE IN
    Restricted Use in Certain Countries Class 2 Equipment
    For information on product disposal please refer to  http://environmental  .belkin  .com
    http://www  .belkin  .com/doc/
    EU DECLARATION OF CONFORMITY 
    ý esky 
    [Czech]  [Belkin Ltd]
     tímto prohlašuje, že tento [ F7D1301] je ve shod se základními požadavky a 
    dalšími p íslušnými ustanoveními sm rnice 1999/5/ES. 
    Dansk 
    [Danish]  Undertegnede 
    [Belkin Ltd] erklærer herved, at følgende udstyr  [F7D1301] overholder de 
    væsentlige krav og øvrige relevant e krav i direktiv 1999/5/EF.
    Deutsch 
    [German]  Hiermit erklärt [Belkin Ltd]
    , dass sich das Gerät [F7D1301] in Übereinstimmung mit den 
    grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 
    1999/5/EG befindet.
    Eesti 
    [Estonian]  Käesolevaga kinnitab 
    [Belkin Ltd] seadme [F7D1301]  vastavust direktiivi 1999/5/EÜ 
    põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele. 
    English  Hereby, 
    [Belkin Ltd] , declares that this product  [F7D1301] is in compliance with the essential 
    requirements and other relevant pr ovisions of Directive 1999/5/EC. 
    Español 
    [Spanish]  Por medio de la presente 
    [Belkin Ltd] declara que el [F7D1301]  cumple con los requisitos 
    esenciales y cualesquiera otras disposiciones  aplicables o exigibles de la Directiva 1999/5/CE. 
    
    						
    All Belkin manuals Comments (0)

    Related Manuals for Belkin Router Surf Wireless User Manual