Belkin Router F5D8236-4 User Manual

69N Wireless Router
sectionstable of c ontents1 23456 89107
MaNUally Co NfIg URIN g NeTWoRK  s eTTIN gs 
Set up the computer that is connected to the cable or DSL modem FIRST using these steps. You can also use these steps to add computers to your 
Router after the Router has been set up to connect to the Internet.
Manually Configuring Network  settings in Mac  os up to 9 �x 
1�    Pull down the Apple menu. Select “Control Panels” and select 
“ T C P/ I P ”.
2 �   You will see the TCP/IP control panel....

70N Wireless Router
sectionstable of c ontents1 23456 89107
MaNUally Co NfIg URIN g NeTWoRK  s eTTIN gs 
Manually Configuring Network s ettings in Mac os X 
1�    Click on the “System Preferences” icon.
2�   Select “Network” (1) from the “System Preferences” menu.
(1)
3�   Select “Built-in Ethernet” (2) next to “Show” in the Network menu.
4 �   Select the “TCP/IP” tab (3). Next to “Configure” (4), you should 
see “Manually” or “Using DHCP”. If you do not, check the 
PPPoE tab (5) to make sure that...

71N Wireless Router
sectionstable of c ontents1 23456 89107
MaNUally Co NfIg URIN g NeTWoRK  s eTTIN gs 
5�   If “Manually” is selected, 
your Router will need to 
be set up for a static IP 
connection type. Write 
the address information 
in the table below. You 
will need to enter this 
information into the Router. 
6�    If not already selected, select “Using DHCP” next to “Configure” 
(4), then click “Apply Now”.
y our network settings are now configured for use with the Router � 

72N Wireless Router
sectionstable of c ontents1 23456 89107
MaNUally Co NfIg URIN g NeTWoRK  s eTTIN gs 
Manually Configuring Network s ettings in Windows 2000, NT, or XP
1�    Click “Start”, “Settings”, then “Control Panel”.
2 �   Double-click on the “Network and dial-up connections” icon 
(Windows 2000) or the “Network” icon (Windows XP).
3 �   Right-click on the “Local Area Connection” associated with your 
network adapter and select “Properties” from the drop-down menu. 5
�   If “Use the following IP...

73N Wireless Router
sectionstable of c ontents1 23456 89107
MaNUally Co NfIg URIN g NeTWoRK  s eTTIN gs 
Manually Configuring Network s ettings in Windows 98 or Me
5�   Click the “Gateway” tab (2). Write the gateway address down in 
the chart.
(1)
(2)
(3)
3�   If “Specify and IP address” is selected, your Router will need 
to be set up for a static IP connection type. Write the address 
information in the table below. You will need to enter this 
information into the Router. 7�
   If not already...

74N Wireless Router
sectionstable of c ontents1 234567 910
ReCo MM eN ded Web bR oW se R s eTTIN gs 
8
In most cases, you will not need to make any changes to your web browser’s settings. If you are having trouble accessing the Internet or the 
Web-Based Advanced User Interface, then change your browser’s settings to the recommended settings in this section.
Microsoft
® Internet e xplorer 4�0 or Higher
1�  Start your web browser. Select “Tools” then “Internet Options”. 2
�   In the “Internet Options”...

75N Wireless Router
sectionstable of c ontents1 234567 9108
ReCo MM eN ded Web bR oW se R s eTTIN gs 
3�  Under the “Internet Options” screen, click on “Connections” and 
select “L AN Settings…”.
4 �  Make sure there are no check marks next to any of the displayed 
options: “Automatically detect settings”, “Use automatic 
configuration script”, and “Use a proxy server”. Click “OK”. 
Then click “OK” again in the “Internet Options” page.  Netscape® Navigator® 4
�0 or Higher
1�  Start Netscape. Click on...

76N Wireless Router
sectionstable of c ontents1 2345678 109
TR o Ubles Hoo TIN g 
setup a ssistant C d does not automatically start �
If the CD-ROM does not start the Setup Assistant automatically, it could 
be that the computer is running other applications that are interfering 
with the CD drive. 
1�  If the Setup Assistant Welcome screen does not appear within 
15-20 seconds, open up your CD-ROM drive by double-clicking 
on the “My Computer” icon that is located on your desktop.
2 �   Next,...

77N Wireless Router
sectionstable of c ontents1 2345678 109
TR o Ubles Hoo TIN g 
setup a ssistant cannot connect my Router to the Internet �
If the Setup Assistant is not able to connect the Router to the Internet, 
please check the following items:
1�  Use the troubleshooting suggestions within the Setup Assistant.
2 �  If your ISP requires a user name and password, make sure that 
you have typed in your user name and password correctly. Some 
user names require that the ISP’s domain may be at the end...

78N Wireless Router
sectionstable of c ontents1 2345678 109
TR o Ubles Hoo TIN g 
•	 The 	Setup	Assistant 	completed 	installation, 	but	my	web 	browser 		
  doesn’t work �
•	 I 	am	unable 	to	connect 	to	the 	Internet. 	The	“modem” 	LED	on	my 		
  Router is on, and the “internet” led  is blinking�
1�  If you cannot connect to the Internet, the “modem” LED is on, 
and the “internet” LED is blinking, the problem may be that 
your connection type may not match the ISP’s connection.  
2 �  If you have a...