Belkin Router F5D7234-4user Manual

79Wireless G Router
sectionstable of c ontents1 23456 8910
7
Man Ually Conf IGURInG n eTW oRK s eTTI nG s
Manually Configuring network a dapters in Mac os X
3�   Select “Built-in Ethernet”  (1) next to “Show” in the “Network”  menu.
4 �   Select the “TCP/IP” tab  (2). Next to “Configure:”  (3), you should see 
“Manually” or “Using DHCP”. If you do not, check the PPPoE tab 
(4)  to make sure that “Connect using PPPoE” is NOT selected. If it 
is, you will need to configure your Router for a PPPoE...

80Wireless G Router
sectionstable of c ontents1 23456 8910
7
Man Ually Conf IGURInG n eTW oRK s eTTI nG s
5�   If “Manually” is selected, 
your Router will need to 
be set up for a static IP 
connection type. Write the 
address information in the 
table below. You will need 
to enter this information into 
the Router. 
(1) 
(3)  (4)  (2) 
6�   If not already selected, select “Using DHCP” next to “Configure:” 
(3), then click “Apply Now”.
y our network adapter(s) are now configured for use with the Router...

81Wireless G Router
sectionstable of c ontents1 234567 910
ReCo MM ended Web bR oW se R s eTTI nG s 
8
In most cases, you will not need to make any changes to your web browser’s settings. If you are having trouble accessing the Internet or the 
Web-Based Advanced User Interface, then change your browser’s settings to the recommended settings in this section.
Internet e xplorer 4�0 or Higher
1�  Start your web browser. Select “Tools” then “Internet Options”.
2�   In the “Internet Options” screen, there...

82Wireless G Router
sectionstable of c ontents1 234567 910
8
Re Co MM ended Web bR oW se R s eTTI nG s 
3�  Under the “Internet Options” screen, click on “Connections” and 
select “L AN Settings…”.
4 �  Make sure there are no check marks next to any of the displayed 
options: “Automatically detect settings”, “Use automatic 
configuration script”, and “Use a proxy server”. Click “OK”. Then 
click “OK” again in the “Internet Options” page.  n
etscape® n avigator® 4 �0 or Higher
1�  Start Netscape. Click on...

83Wireless G Router
sectionstable of c ontents1 2345678 10
TRo Ubles Hoo TInG
9
Problem: 
Installation CD does not automatically start.
s olution:
If the CD-ROM does not start the Setup Assistant automatically, it could 
be that the computer is running other applications that are interfering 
with the CD drive. 
1�  If the Setup Assistant screen does not appear 
within 15 –20 seconds, open up your CD-ROM 
drive by double-clicking on the “My Computer” 
icon that is located on your desktop.
2 �  Next,...

84Wireless G Router
sectionstable of c ontents1 2345678 10
9
T Ro Ubles Hoo TInG
Problem:
The Setup Assistant cannot find my Router.
solution: 
If the Setup Assistant is not able to find the Router during the installation 
process, please check the following items:
1�  If the Setup Assistant is not able to find the Router during the 
installation process, there may be third-party firewall software 
installed on the computer attempting to access the Internet. 
Examples of third-party firewall software are...

85Wireless G Router
sectionstable of c ontents1 2345678 10
9
T Ro Ubles Hoo TInG
Problem:
The Setup Assistant cannot connect my Router to the Internet. 
solution:
If the Setup Assistant is not able to connect the Router to the Internet, 
please check the following items:
1�  Use the troubleshooting suggestions within the Setup Assistant. 
If the troubleshooting screen does not open automatically, click 
on the “Troubleshoot” button in the lower, right-hand corner of the 
Setup Assistant window.
2 �  If...

86Wireless G Router
sectionstable of c ontents1 2345678 10
9
T Ro Ubles Hoo TInG
Problem:
•	 The Setup Assistant completed installation, but my web browser 
doesn’t work.
•	 I am unable to connect to the Internet. The Router’s “Modem” light 
is on and the “Internet” light is blinking.
s olution: 
If you cannot connect to the Internet, the “Modem” light is on, and the 
“Internet” light is blinking, the problem may be that your connection type 
may not match the ISP’s connection. 
•	 If you have a “static...

87Wireless G Router
sectionstable of c ontents1 2345678 10
9
T Ro Ubles Hoo TInG
Problem:
I can’t connect to the Internet wirelessly.
solution:
If you are unable to connect to the Internet from a wireless computer, 
please do the following:
1�  Look at the lights on your Router. Your Belkin Router’s lights should 
be as follows: 
  • The “Power” light should be on. 
  • The “Internet” light should be on. 
  • The “Modem” light should be either on or blinking.
2 �  Open your wireless utility software by...

88Wireless G Router
sectionstable of c ontents1 2345678 10
9
T Ro Ubles Hoo TInG
Problem:
I can’t connect to the Internet wirelessly, but my network name is listed.
solution:
If the name of your network is listed in the “Available Networks” list, 
please follow the steps below to connect wirelessly:
1�  Click on the correct network name in the “Available Networks” list. 
2 �  If the network has security (encryption) enabled, you will need to 
enter the network key. For more information regarding...