Belkin Router F5D7231-4 User Manual

89

Using the Web-Based Advanced User Interface
89
s e c t i o n
2
1
3
4
5
6
7
8
9
10

Enabling/Disabling Auto Firmware Update
This innovation provides the Router with the built-in capability to 
automatically check for a new version of firmware and alert you that the new 
firmware is available. When you log into the Router’s Web-Based Advanced 
User Interface, the Router will perform a check to see if new firmware is 
available. If so, you will be notified. You can choose to download the new 
version...

9190
Manually Configuring Network Settings

9190

In order for your computer to properly communicate with your Router, you will 
need to change your PC’s TCP/IP settings to DHCP. 
Manually Configuring Network Adapters in Windows 2000, NT, or XP 
1.
    Click  “Start”,  “Settings”,  then  “Control  Panel”.
2.    Double-click  on  the  “Network  and  dial-up  connections”  icon (Windows  2000)  or  the  “Network”  icon  (Windows  XP).
3.    Right-click  on  the  “Local  Area  Connection”  associated  with...

91

Manually Configuring Network Settings
91
s e c t i o n
2
1
3
4
5
6
7
8
9
10

Manually Configuring Network Adapters in Windows 98SE or Me
1.
    Right-click  on  “My  Network  Neighborhood”  and  select  “Properties”  from  the  drop-down  menu.
2.    Select  “TCP/IP  ->  settings”  for  your  installed  network  adapter. You  will  see  the  following  window.
3.   If  “Specify  an  IP  address”  is  selected,  your  Router  will  need to  be  set  up  for  a  static  IP  connection  type.  Write...

9392
Manually Configuring Network Settings

9392
Manually Configuring Network Settings

Set  up  the  computer  that  is  connected  to  the  cable  or  DSL  modem 
FIRST  using  these  steps.  You  can  also  use  these  steps  to  add 
computers  to  your  Router  after  the  Router  has  been  set  up  to  connect 
to  the  Internet.
Manually Configuring Network Adapters in Mac OS X  
1.
  Click  on  the  “System  Preferences”  icon.
 
2.  Select  “Network” (1)  from  the  “System  Preferences”...

93
Manually Configuring Network Settings

93
Manually Configuring Network Settings
s e c t i o n
2
1
3
4
5
6
7
8
9
10
Manually Configuring Network Settings

3.  Select  “Built-in  Ethernet” (2)  next  to  “Show”  in  the  
Network  menu.
 
(2)
(3)
(4)
(5)
4.  Select  the  “TCP/IP”  tab (3).  Next  to  “Configure:” (4),  you  should 
see  “Manually”  or  “Using  DHCP”.  If  you  do  not,  check  the 
PPPoE  tab 
(5)  to  make  sure  that  “Connect  using  PPPoE”  is  NOT 
selected.  If  it  is,  you...

9594
Recommended  Web  Browser  Settings

9594
Recommended  Web  Browser  Settings

In  most  cases,  you  will  not  need  to  make  any  changes  to  your  web 
browser’s  settings.  If  you  are  having  trouble  accessing  the  Internet  or 
the  Web-Based  Advanced  User  Interface,  then  change  your  browser’s 
settings  to  the  recommended  settings  in  this  section.
Internet Explorer 4.0 or Higher
1.
    Start  your  web  browser.  Select  “Tools”  then  “Internet  Options”.
2.    In  the...

95

Recommended  Web  Browser  Settings
95
s e c t i o n
2
1
3
4
5
6
7
8
9
10

4.    Make  sure  there  are  no  check  marks  next  to  any  of  the  displayed  options:  “Automatically  detect  settings”,  “Use  automatic 
configuration  script”,  and  “Use  a  proxy  server”.  Click  “OK”.  Then 
click  “OK”  again  in  the  “Internet  Options”  page.
   
 
Netscape® Navigator® 4.0 or Higher
1.
    Start  Netscape.  Click  on  “Edit”  then  “Preferences”.
2.    In  the  “Preferences”  window,  click...

9796
Troubleshooting

9796
Troubleshooting

 Problem:
  Installation  CD  does  not  automatically  start.
Solution:
If  the  CD-ROM  does  not  start  the  Easy  Install  Wizard  automatically, 
it  could  be  that  the  computer  is  running  other  applications  that  are 
interfering  with  the  CD  drive. 
1.   If  the  Easy  Install  Wizard  screen  does  not  appear  within  15—20 seconds,  open  up  your  CD-ROM  drive  by  double-clicking  on  the 
“My  Computer”  icon  that  is  located  on...

97

Troubleshooting
97
s e c t i o n
2
1
3
4
5
6
7
8
9
10

Problem:
The  Easy  Install  Wizard  cannot  find  my  Router.
Solution: 
If  the  Easy  Install  Wizard  is  not  able  to  find  the  Router  during  the 
installation  process,  please  check  the  following  items:
1.   If  the  Easy  Install  Wizard  is  not  able  to  find  the  Router  during  the  installation  process,  there  may  be  third-party  firewall 
software  installed  on  the  computer  attempting  to  access 
the  Internet....

9998
Troubleshooting

9998
Troubleshooting

Problem:
The  Easy  Install  Wizard  cannot  connect  my  Router  to  the  Internet. 
Solution:
If  the  Easy  Install  Wizard  is  not  able  to  connect  the  Router  to  the 
Internet,  please  check  the  following  items:
1.   Use  the  troubleshooting  suggestions  within  the  Easy Install  Wizard.  If  the  troubleshooting  screen  does  not  open 
automatically,  click  on  the  “Troubleshoot”  button  in  the  lower, 
right-hand  corner  of  the...