Beko Wml 15100 P Manual

							-1- EN
Washing  Machine  |  User’s  Manual
Control Panel      Program Selection and Starting Machine
1
Plug your machine to outlet. Turn on the machine by pressing 
“On / Off” key. Open the door by pulling the handle and load the 
machine without exceeding loading capacity and close the door. 
Specify the appropriate program by looking at program selec -
tion table according to type of laundry, degree of soiledness and 
washing temperature. Position program selection key to desired 
washing program-temperature.  Select convenient spin speed  related to selected program. If you are using auxiliary function 
press desired auxiliary function key.
Afterwards place appropriate detergent and softener to your 
machine’s detergent drawer. Start your machine by pressing 
Start/Pause/Cancel button. Start/Pause/Cancel key’s led will be 
on. After your machine starts, you can follow from the program 
progress display at which step your machine is. 
Program selection table
WML 15040 KL   WML 15060 E    WML 15080 P
WML 15050 KL   WML 15080 DL  WML 15100 P
WML 15060 KL 
WML 15080 DB  WML 15100 DB
13456
2
*  Energy Labeling Program (EN 60456)( 1 )WML 15060 E - WML 15080 DB - WML 15080 P - WML 15100 P - WML 15100 DB
( 2 ) WML 15060 KL - WML 15050 KL - WML 15040 KL - WML 15080 DL
Program Type of laundryMaximum Load 
(kg)Program Time 
(minutes)Water 
consumption (lt)Power
 
consumption
(kWh)
Prewash
Rinse Plus   Rinse HoldSpin Speed
Selection
 
Cottons 90 Heavily soiled, heat resistant cotton, linen5155 45 1.70 •••
•
Cottons 60 * Normally soiled, heat resistant cotton, linen5145 450.95 / 1.14 •• • •
Cottons 40 Lightly soiled or heat sensitive cotton5150 45 0.65 •• • •
Cold (Cotton) Lightly soiled or heat sensitive cotton5110 45 0.35 •• • •
Super  40 Heavily soiled or heat sensitive cotton5180 45 0.65 •
Synthetics 60Normally soiled, heat resistant cotton/synthetic mixture2.5120 55 0.90 •• • •
Synthetics 40 Lightly soiled or heat sensitive cotton/synthetic mixture2.5125 55 0.55 •• • •
Synthetics 30 Slightly soiled or heat sensitive cotton/synthetic mixture2.5110 55 0.35 •• • •
Cold (Synthetic) Slightly soiled or heat sensitive cotton/synthetic mixture2.5100 55 0.20 •• • •
Delicates 30 Delicate, sensitive sysnthetic and cotton mixture285 60 0.40 •• •
Wool 40 Delicate mixtures with wool and machine washable label1.57560 0.40 •• •
Cold (Wool) Delicate mixtures with wool and machine washable label1.57060 0.04 •• •
Hand Wash 30 Special program for silks, cashmeres and clothes with not machine washab\
le 
labels1
55 50 0.21 •
Mini 30Special program for slightly soiled and little amounts of laundry (trac\
king suits, towels, etc., 
that were used only 1 time)2.53040 0.16 •
RinseRinsing Program523 15 0.04 •
Spin + PumpSpinning + Pumping Program514 - 0.03 •
(1)
(2)
Program selection knob
Program follow-up indicator
On / Off button
Start/Pause/Cancel button
Auxiliary function buttons
Spin speed selection knob6 
						

							-2- EN
•	 This	product	is	designed	for	home	use.	
•	 If
	the 	fuse 	in 	your 	house 	is 	less 	than 	16A 		than 	have 	a 	certi -
fied	electrician	deploy	an	16A	fuse.
•	 In 	case 	of 	transformer 	or 	non-transformer 	use, 	grounding	
installation	 must	be	performed	 with	a	licensed	 electrician. 	
Any	 use	before	 grounding	 is	not	 our	responsibility.	
•	 Please 	call 	certified 	service 	for 	a 	failure 	of 	electric 	plug 	/	
cable.		
•	 Never 	place 	your 	machine 	over 	a 	carpet 	covered 	floor.	
•	 At 	first 	use, 	washing 	must 	be 	performed 	at 	Cotton 	90°C 	pro -
gram	 without	 loading	with	laundry	 for	getting	 your	machine 	
ready	for	washing.	
•	 Performance 	of 	your 	washing 	machine 	depends 	on 	the 	qual -
ity 	of 	water 	and 	hygiene 	compound 	used. 	If 	low 	quality 	and	
unfitting	 cleaning	 material	is	used	 the	stains	 will	be	fixed. 	
•	 	Because 	of 	quality 	control 	procedures 	there 	might 	be 	little	
amount	 of	water	 in	your	 machine.	 This	does	 not	have	 any	
damage	to	your	machine.	
•   Your machine is programmed for starting operation again  when electricity is off and on afterwards. You can not press 
On / Off button to cancel program. Machine will go on 
program when electricity is on. To CANCEL the program 
press >Start/Pause/Cancel<  button for three seconds. (See. 
Cancelling a program)
•  After your machine starts operation, if Start/Pause/Cancel 
key starts blinking than door is not locked. Open and close 
the door again begin washing program again. 
•  If the “washing” led on the program progress display is blink -
ing either there is no water or tap is off. Check your taps. 
Turn your machine off and on. If the problem persists unplug 
your machine, turn off tap water and call authorized service. 
•  If program is started and program selection can not be 
performed your machine might be in protection mode due to 
infrastructure problem (voltage, water pressure, etc.) Press 
and hold the > Start/Pause/Cancel < button for 3 seconds in  order to switch machine to factory settings. 
Before starting your machine please beware of below men -
tioned points:
Did	you	plug	the	cable?
Did	you	connect	draining	hose	correctly?	
Did	you	close	front	door?
Did	you	open	tap	water?	
Sorting the Laundry 
Sort laundry according to type of fabric, color, level of dirtiness 
and allowed washing temperature. Do not wash white laundry 
together with colored ones. Remove hard parts like belt, wrist 
button, curtain buttons, etc. or place laundry in a cloth bag. 
Empty pockets. Zip up and button up. Very tiny laundry like 
baby clothes may get into inside of drum, midst of bellow,  pump filter, hose, etc. in order to prevent this it is advised to 
place such laundry in a special laundry string bag or large 
laundry. Your machine can wash “Machine Wash” or “No-mat-
ting” labeled woolen with special woolen program. Delicate 
laundry with “Do not wash” or “hand wash” label (silk, cash-
mere, pure wool, etc.) can be washed in the special hand-wash 
program. 
Opening front door
Pull the handle to open the front door. Your machine’s front 
door is designed for opening  during only machine is not oper
-
ating. If the led displays “door” than door can open. 
Loading machine with laundry 
Fill the machine by unfolding and not squeezing laundry. Place 
hand-woven garments inside-out to the machine. Make sure 
there is no laundry jammed between bellow and front-door.
Close the loading door by pushing. If loading door is not prop -
erly closed machine will not start. 
Selection of detergent and softener
Quantity of the detergent used depends on hardness of water 
and how soiled laundry is. Recommended values are indicated 
on the package. If your laundry is low soiled and/or hardness 
of water is low use less detergent as indicated on the package. 
Otherwise it may result in excessive foam.
You should use detergent specially designed for automatic 
washing machines. Avoid using bleach product containing sul-
fur or chlorine. Place powder detergent and softener in appro -
priate drawer compartment and close deter -
gent dispenser.
 
a. powder detergent drawer for pre-wash.
b. powder detergent drawer for main wash.
c. Softener dispenser
d. Siphon
Fill the softener as indicated (usually 
						

							-3- EN
Detergent Dispenser
Powder detergent residue may accumulate in drawer after a 
while. In order to clean detergent drawer press the marked 
point of the siphon on softener compartment and push the 
drawer towards yourself. Wash the drawer with water 
Siphon
Do not neglect cleaning suction cup when it becomes soiled. 
In order take suction cup out first take detergent drawer out. 
Clean it in order to eliminate blocking by softener residue. After 
cleaning place suction cup to its place and make sure it is 
placed properly. 
Water Inlet Filters
There is a filter at each flat end where water inlet hose is con-
nected to tap and at each of water inlet valve placed behind 
the machine. These filters blocks entrance of foreign objects 
and dirts to the machine. Filters must be cleaned regularly to 
avoid clogging. For doing this, turn off tap water. Pull out water 
5Care and maintanence
Spin Speed selection knob: With the models that contain a 
speed selection knob, you can spin your laundries until 1200 rpm 
by using this knob. Your machine will not spin over 800 rpm in 
the synthetic programs and over 600 rpm in the woolen pro-
grams in order to protect your laundries. If you want to take out 
your laundries without spinning, turn the speed selection knob to 
“No Spin” position.
Pressing “On/Off”: 
You can make the machine ready for 
program selection by pressing the “On /off” button. When “On/
Off” button is pressed, “Door” LED is on meaning that “door \
can 
be opened”. To turn off the machine, press the “On/Off” button \
again.Pressing the “On/Off” button never means that the program 
is started.You must press “Start/Pause/Cancel” button in order 
the machine starts its program. 
Child-proof lock:  “This machine is equipped with a child lock 
in order to prevent the program flow to be affected when the 
buttons are pressed during washing cycles.  In order to enable 
the child lock, press and keep pressed the 1st and 2nd auxiliary  function buttons from the left at the same 
time for 3 seconds.  The light of the 1st 
auxiliary function button will flash continu-
ously. After the program completes, it 
is necessary to disable the child lock in 
order to initiate a new program or interfere 
the program. Therefore, when the same 
buttons are pressed for 3 seconds, light of 
the second auxiliary function will go off.
Function Selection: Depending on the selected program, the 
selectable auxiliary functions are selected by pressing the each 
function’s button. The light of the selected function comes on. 
Since it is not possible to select some of the auxiliary func-
tions together, one of them becomes off when the other one is 
selected.
Program Progress
After the machine starts to operate, the related light in the program 
follow-up indicator comes on according to the selected program. 
When a step is complete, the light of the previous step goes off 
and the light of the related step comes on. When On/Off button is 
pressed, the “Door” light comes on.After the washing program is 
selected, “Washing” light on the program follow-up indicator comes\
 
on when the “Start/Pause/Cancel” button is pressed.When the 
program ends “End” light comes on. After the program is complete, \
the 
machine will not allow you to open the door for a while for your 
safety. If you want to open the door meanwhile, the door will not 
open and the “Door” light will flash. After the door lock is deact\
ivat-
ed the “Door” and “End” lights will come on. Now you can ope\
n the 
front door.  You can switch your machine in to the “Pause” mode by 
pressing the “Start/Pause/Cancel” button while your machine is 
operating.In this case, “Start/Pause/Cancel” light will flash. You\
 can 
make some changes in the program settings in the Pause mode 
(See. Changing the Program) and you may also benefit from the 
laundry addition function if the “Pause” mode is selected at a 
suitable step of the program (See. Laundry  addition function).
In 
order to return to the “Washing” mode from the “Pause” mode,\
 
you need to press the “Start/Pause/Cancel” button again. In this 
case, “Start/Pause/Cancel” light will flash and your machine will \
resume its program. Changing Program 
Even if a new program is selected by changing the position of 
program selection knob while your machine is operating, the first 
selected program continues to run.In order to change the wash-
ing program, the ongoing program should be cancelled. (See. 
Cancelling a program)
In order to change the auxiliary functions while your machine is 
operating, you can make any desired changes after pressing the 
“Start/Pause/Cancel” button.
If you want to change the spin speed while your machine is 
operating, press the “Start/Pause/Cancel” button, select the spin \
speed and press the “Start/Pause/Cancel” button again.
Adding laundry
If you want to add laundry to your machine after the washing 
program starts, switch the machine to pause mode by pressing 
“Start/Pause/Cancel” button. If the water level in the machine 
is suitable, the “Door” light on the program follow-up indicator 
comes on approximately 2 minutes later and you can open the 
door and add laundry. If the “Door” light is not 
continuously on at the end of this period, the water level in the 
machine is not suitable and you can not add laundry. You can 
resume the program by pressing “Start/Pause/Cancel” button 
again.
Canceling a Program 
In order to cancel the selected program, “Start/Pause/Cancel” 
button is pressed for 3 seconds and machine starts to drain at 
the end of this time. Meanwhile, “Washing” and “End” lights \
are 
on. After the drainage process completes “Start/Pause/Cancel” 
and “Washing” lights are off. “Door” light starts to flash. \
When the 
“Door” light is on continuously, the door 
can be opened and a new program can 
be selected. You can start a program 
by selecting a new program.
The selected program continues to run 
even if the position of program selection 
knob is changed while your machine is 
operating. In order to change the wash-
ing program, a new program can be 
selected and started after “Cancelling a program” by pressing the \
“Start/Pause/Cancel” button for 3 seconds as described above.
End of Program
When the program ends “End” light on the program follow-up 
indicator comes on. “End” and “Door” lights come on within t\
wo 
minutes after the door is opened, the machine becomes ready for 
the next washing. If any of the buttons is pressed or the posi-
tion of the selection knob is changed when the machine is at the 
end of a program, “End” light goes off and only the “Door” l\
ight 
remains on. Meanwhile, if the door is still locked, the “Door” lig\
ht 
flashes until the door is opened. To turn the machine off, press 
the “On/Off” button.
Emptying Laundry 
Your machine stops automatically when the program ends. Turn 
off the taps. Grab and pull the handle to open the door. Press 
“On/Off” button to turn off your machine. After you take the laun-
dries out, leave the front door open and ventilate the inside of the 
machine. Check the inside of the bellows and wipe it. 
						

							-4- EN
inlet hoses. Clean the top of the water inlet valve filter with a 
brush. If filters are extremely clogged you can pull it out with a 
pincer. 
You	can 	take 	out 	the 	flat 	side 	of 	water 	inlet 	hoses 	with 	its	
seal	and	clean	with	tap	water.
Hose
There 	is 	risk 	of 	freezing 	in 	cold 	region, 	if 	your 	machine 	is 	placed	
in 	a 	cold 	place 	remaining 	water 	in 	hoses 	must 	be 	drained 	with	
pump 	filter 	when 	machine 	is 	not 	used. 	Water 	inlet 	hoses 	can 	be	
drained	by	taking	it	out	from	tap.	
Cleaning Pump Filter 
• Clean the foreign substance filter 
periodically at least for once!
• If the foreign substances (coins, buttons, baby socks and 
etc.) clog the foamy water pump, clean the filter.
• Before cleaning, empty the water that remains inside first.
• Hot water danger: There may be 15 liters of hot water at 
90°C in the machine. Open the filter carefully.
Drain the water completely in the following situations...
• before cleaning the foreign substance filter;
• before transporting the machine ( for example moving into 
a new house);
• when there is a risk of freezing.
1. Turn off the appliance, unplug the power cable and close 
the tap. Wait for the hot soapy water to cool enough. Other-
wise, there is a risk of scalding.
2. Open the service cover by pressing the button. In order 
to prevent the little amount of water that is inside pump spill-
ing over the floor, put a container in front of the filter cover. 
Take out the filter by turning anticlockwise.
3. To loosen the foreign substance filter, turn it half turn 
(anticlockwise) and take the remaining water with a cloth. 
When there is no water, turn the foreign substance filter until 
it is totally released and take it out.
4. Clean the foreign substance filter and pump opening.
5. Reinstall the foreign substance filter and turn it tightly 
(clockwise).
6. Close the service cover.
1.  Removing the transportation safety bolts
Before the washing machine is operated, the transit bars must 
be removed! In order to do this:
1. Loosen “C” bolts by rotating them counter clockwise with a 
suitable spanner 
2. Remove transportation safety bolts by turning. 
3. Place “P” plastic covers onto the openings of transportation 
locks by rotating in direction of arrow and pushing. 
Attention please! Keep the transit safety bolts for using when 
machine is to be transported again. Always transport your  machine with transportation locks. 
2. Leveling the feet
In order to operate your machine without 
noise and vibration it must be properly on 
balance. Four feet of your machine can be 
adjusted.  First loosen the plastic counter 
bolt. Tighten the counter bolt after adjusting 
the feet for leveling your machine.
3. Water Connections 
a) Water Inlet Hose:  Your machine is connect-
ed to water supply by special hoses supplied 
by the machine. 
There are plastic seals on hose or plastic bag 
for eliminating any leakage in connections 
points. These seals must be used on each 
side of the connection. Seals on machine side must be con-
nected filter cannal.
After connecting the hose, check all connections for leaks In 
order to eliminate any risk due to water leakage keep the taps 
off when machine is not used.  
Your machine will operate efficiently if the water from tap is 
minimum 1 and maximum 10 bars. Practically 1 bar means 8 
liters of water in one minute when tap is fully on. 
Connect hose to the machine. Tighten bolts with hand power, 
do not use spanner.
Do not connect single inlet machine to hot water. If machine is 
connected with Y part to a double inlet and over 40˚C for single 
inlet machines, machine may switch to protection mode.
b)  Water drain hose:  Water drain hose could be placed either 
at the side of the bath tub, or directly to the drain. The hose 
should not be bent. Water drain hose should be secured with 
the holder so that it would not fall down on the ground.
The hose should be placed between 40 and 100 cm. from the 
ground. Water drain hose could be placed directly to the drain 
water inlet.
4. Electrical connection
Connect the power cord to the appropirate electrical system 
which is being supported by the maximum voltage and current 
rating indicated on the rating plate placed on the washing 
machine.
Look! Page 1, Steps before operating Fullautomatic Wash -
ing Machine and safety precautions. Make sure that you have 
grounded power outlet. 
You turned the machine on, but the leds are off on the 
panel.
Check the grounding on the power cable or a blown fuse. 
Check the front door proper closure.
Machine does not take water.
Check the front door for proper closure. Either taps are closed 
or water intake filters are clogged.
Taken water is directly discharged.
Check if the discharge hose placed as described in the users 
manual or not.  
Water coming from beneath the machine.
Check the water intake and drain hoses. Tighten the connec-
tions. The washers of the hoses may be worn out. If non of the 
both, the pump filter is not closed properly.
Foam coming out of the detergent dispenser.
Check whether your detergent is suitable for automatic ma-
chines. Next time use less detergent.  
Pump does not drain water.
Clean the pump filter. Check whether the drain hose is bent or 
not. If there is need to clean the pump filter, refer to the pump 
filter cleaning section of the manual.
Installation6
Before calling service7