BEKO WMI 71241 User Manual

Washing Machine
Plně automatická pračka  
Perilica rublja 
Перална машинаWMI 71241
 

2 - EN
1 Warnings
General Safety•	 Never	place	your	machine	on	a	carpet	covered	floor.	Otherwise,	lack	of	airflow	from	
below	of	your	machine	may	cause	electrical	
parts	to	overheat.	This	may	cause	problems	
with	your	washing	machine.
•	 If	the	power	cable	or	mains	plug	is	damaged	 you	must	call	Authorized	Service	for	repair.
•	 Fit	the	drain	hose	into	the	discharge	housing	 securely	to	prevent	any	water	leakage	and	
to	allow	machine	to	take	in	and	discharge	
water	as	required.	It	is	very	important	that...

3 - EN
C Keep	the	transportation	safety	bolts	in	a	safe	
place	to	reuse	when	the	washing	machine	
needs	to	be	moved	again	in	the	future.
C Never	move	the	appliance	without	the	
transportation	safety	bolts	properly	fixed	in	
place!
Adjusting the feet
A	Do	not	use	any	tools	to	loosen	the	lock	nuts.	Otherwise,	they	can	be	damaged.
1.	 Manually	(by	hand)	loosen	the	lock	nuts	on	 the	feet.
2.	 Adjust	them	until	the	machine	stands	level	 and	firmly.
3.	 Important:	Tighten	all	lock	nuts	up	again.
Connecting to...

4 - EN
stockings,	etc.	in	a	laundry	bag,	pillow	case	
or	something	similar.	This	will	also	save	your	
laundry	from	getting	lost.
•		 Place	curtains	in	the	machine	with	care.	 Remove	curtain	rails	and	pullers.
•		 Fasten	zippers,	sew	loose	buttons	and	mend	 rips	and	tears.
•		 Wash	“machine	washable”	or	“hand	 washable”	labeled	products	only	with	an	
appropriate	program.
•		 Do	not	wash	colors	and	whites	together.	New,	 dark	colored	cottons	release	a	lot	of	dye.	
Wash	them	separately.
•		 Tough	stains...

5 - EN
Do	not	fill	the	detergent	above	the	maximum	
filling	level	line;	otherwise	the	excess	amount	of	
detergent	will	reach	the	laundry	without	water	and	
may	cause	stains	on	the	garments.In	this	case	you	
will	need	to	refill	the	compartment.	Do	not	pour	the	
detergent	onto	the	laundry	directly	since	this	may	
cause	stains	on	the	garments.
Liquid Softener Compartment 
Put	the	suggested	amount	of	liquid	softener	into	
the	left	compartment	with	“
”	symbol	and	dilute	
it	to	the	maximum	filling	level	line...

6 - EN
Display symbols
a	 -	Spin	Symbol
b	 -	Spin	Speed	Indicator
c		–		Water	cut-off	symbol	(According	to	your	machine’s	model)
d	 -	Economy	Symbol
e	 -	Temperature	Indicator
f	 -	Temperature	Symbol
g	 -	Door	Locked	Symbol
h	 -	Standby	Symbol
i	 -	Start	Symbol
j	 -	Auxiliary	Function	Symbols
k	 -	Remaining	Time	and	Delaying	Time	Indicator
l	 -	Program	Indicator	Symbols	(pre-wash/main	 wash/rinse/softener/spin)
m	 -	Time	Delaying	Symbol
F1F2F3F4
a b c de f
g
h
i
j
k
l
m
Turning the machine on
Plug	in...

7 - EN
synthetic/cotton	blended	garments,	etc.).	For	
curtains	and	lace,	the	“Synthetic	40”	program	with	
pre-wash	and	anti-creasing	functions	selected	is	
recommended.	Detergent	should	not	be	put	in	the	
pre-wash	compartment.	Less	detergent	should	be	
put	in	the	main	wash	compartment	as	loose	knit	
fabrics	(lace)	foam	too	much	due	to	its	meshed	
structure.
• Woollens
You	can	wash	your	machine-washable	woolen	
garments	on	this	program.	Wash	by	selecting	the	
proper	temperature	according	to	the	labels	of...

8 - EN
• Rinse
This	program	is	used	when	you	want	to	rinse	or	
starch	separately.
• Spin + Drain
This	program	spins	with	maximum	possible	rpm	
in	the	default	setting	after	the	water	drains	from	
the	machine.
C	 Use	a	lower	spin	speed	for	delicate	laundries.
Temperature selection
Whenever	a	new	program	is	selected,	the	
temperature	anticipated	for	that	program	
appears	on	the	temperature	indicator	(7b).
To	change	the	temperature,	press	the	
temperature	button.	Temperature	decreases	in	
10°	increments....

9 - EN
Program and consumption table
•	:	Selectable
*	:	Automatically	selected,	not	cancellable.
**	:	Energy	Label	program	(EN	60456)
	***	If	maximum	spin	speed	of	your	machine	is	lower,	selection	may	be	made	until	maximum	spin	speed.
-	:	See	program	description	for	maximum	load.
C	 The	auxiliary	functions	in	the	table	vary	according	to	the	model	of	your	machine.
C	 Water	and	power	consumption	and	program	duration	differ	from	the	table	subject	to	changes	in	water	pressure,	water	hardness	and	temperature,...

10 - EN
Auxiliary functionsAuxiliary function selection
If	an	auxiliary	function	that	should	not	be	selected	
together	with	a	previously	selected	function	is	
chosen,	the	first	selected	function	will	be	cancelled	
and	the	last	auxiliary	function	selection	will	remain	
active.
Ex.:	If	you	want	to	select	pre-wash	first	and	then	
quick	wash,	pre-wash	will	be	cancelled	and	quick	
wash	will	remain	active.
Auxiliary	function	that	is	not	compatible	with	the	program	cannot	be	selected.	(see,	“Program	
Selection...