Beko Wmb 71231 B Manual

21EN
sorting them.
Special programmes
For specific applications, select any of the 
following programmes.
• Rinse
Use this programme when you want to 
rinse or starch separately.
• Spin+Drain
Use this programme to apply an 
additional spin cycle for your laundry or to 
drain the water in the machine.
Before selecting this programme, select 
the desired spin speed and press Start / 
Pause button. First, the machine will drain 
the water inside of it. Then, it will spin the 
laundry with the set spin speed...

22EN
Programme and consumption table
EN2 Auxiliary functions
Programme
Max. Load (kg)
Water Consumption (l)
Energy Consumption (kWh)
Max. Speed***
Prewash
Quick Wash
Extra Rinse
Anti-Creasing
Rinse Hold
Soaking
Selectable temperature  range °C
Cottons 907742.30 1600 •••••• Cold-90
Cottons 607701.54 1600 •••••• Cold-90
Cottons 407690.85 1600 •••••• Cold-90
Cottons Eco 60**7441.10 1600 •40-60
Cottons Eco 60**3.5380.88 1600 •40-60
Cottons Eco 40**3.5380.70 1600 •40-60
Daily Quick 907601.90 1200 •• Cold-90...

23EN
• : Selectable
* :  Automatically selected, no canceling.
** :  Energy Label programme (EN 60456 Ed.3)
*** :  If maximum spin speed of the machine is lower then this value, you can o\
nly select 
up to the maximum spin speed.
- :  See the programme description for maximum load.
C Water and power consumption may vary subject to the changes in water pressure, 
water hardness and temperature, ambient temperature, type and amount of 
laundry, selection of auxiliary functions and spin speed, and changes...

24EN
C The auxiliary functions in the table 
may vary according to the model of 
your machine.
Auxiliary function selection
Select the desired auxiliary functions 
before starting the programme. 
Furthermore, you may also select or 
cancel auxiliary functions that are suitable 
to the running programme without 
pressing the Start / Pause button when 
the machine is operating. For this, the 
machine must be in a step before the 
auxiliary function you are going to select 
or cancel.
If the auxiliary...

25EN
C Do not use liquid detergents when 
you set Delayed Start! There is the 
risk of staining of the clothes.
1.  Open the loading door, place the 
laundry and put detergent, etc.
2.  Select the washing programme, 
temperature, spin speed and, if 
required, the auxiliary functions.
3.   Set the desired time by pressing the 
Delayed Start button.
4.   Press Start / Pause button. The 
delayed start time you have set is 
displayed. Delayed start countdown 
starts. “_” symbol next to the delayed 
start...

26EN
appear on the display respectively while 
you keep the buttons pressed for 3 
seconds. Then, "COFF" will appear on the 
display indicating that the Child Lock is 
deactivated.
C In addition to the method above, to 
deactivate the Child Lock, switch the 
Programme Selection knob to On 
/ Off position when no programme 
is running, and select another 
programme. 
C Child Lock is not deactivated after 
power failures or when the machine is 
unplugged.
Progress of programme
Progress of a running...

27EN
programme has been canceled. 
Pump function is activated for 1-2 
minutes regardless of the programme 
step, and whether there is water in the 
machine or not. After this period, your 
machine will be ready to start with the first 
step of the new programme.
C Depending on the step where the 
programme was canceled in, you may 
have to put detergent and softener 
again for the programme you have 
selected anew.
End of programme
“End” appears on the display at the end 
of the programme. 
1.  Wait...

28EN
6 Maintenance and cleaning
Service life of the product extends and 
frequently faced problems decrease if 
cleaned at regular intervals.
Cleaning the detergent drawer
Clean the detergent drawer at regular 
intervals (every 4-5 washing cycles) 
as shown below in order to prevent 
accumulation of powder detergent in 
time.
1.  Press the dotted point on the siphon 
in the softener compartment and pull 
towards you until the compartment is 
removed from the machine.
C If more than normal amount of water...

29EN
cleaned as they do get dirty.
1. Close the taps.
2.  Remove the nuts of the water intake 
hoses to access the filters on the 
water intake valves. Clean them with 
an appropriate brush. If the filters are 
too dirty, take them out by means of 
pliers and clean them.
3.  Take out the filters on the flat ends of 
the water intake hoses together with 
the gaskets and clean thoroughly 
under running water.
4.  Replace the gaskets and filters 
carefully in their places and tighten the 
hose nuts by...

30EN
a. Pull the emergency draining hose out 
from its seat
b.  Place a large container at the end 
of the hose. Drain the water into 
the container by pulling out the plug 
at the end of the hose. When the 
container is full, block the inlet of 
the hose by replacing the plug. After 
the container is emptied, repeat the 
above procedure to drain the water in 
the machine completely.
c.  When draining of water is finished, 
close the end by the plug again and 
fix the hose in its place.
d.  Turn the pump...