Beko Wm 5140 W Manual

							WM 5140 W
WM 5140 S
Automatic
washing machine 
						

							Please read this manual first!
Dear Customer,
We hope that your product which has been manufactured in modern faciliti\
es 
and passed through a strict quality control procedure will give you the \
best 
results.
Therefore, we advise you to read through this manual carefully before us\
ing 
your product and keep it for future reference.
This operation manual will… 
…help you use your machine in a fast and safe way.
	 •	Please	read	the	Operation	Manual	before	installing	and	starting	your	
machine.
	 •	Particularly	follow	the	instructions	related	to	safety.
	 •	Keep	this	Operating	Manual	within	easy	reach.	You	may	need	it	in	the	
future. 
	 •	Please	read	all	additional	documents	supplied	with	this	machine.
Please	note	that	this	Operating	Manual	may	be	applicable	for	several	other	
models. Differences between models will be identified in the manual.
Explanation of symbols
Throughout	this	Operation	Manual	the	following	symbols	are	used:
C Important information or useful hints about usage.
A Warning for hazardous situations with regard to life and property.
B Warning for supply voltage.
This appliance’s packaging material is recyclable. Help recycle it an\
d protect the environment by dropping it off in the municipal receptacles provided\
 for this purpose.	Your	appliance	also	contains	a	great	amount	of	recyclable	material.	It is marked with this label to indicate the used appliances that should\
 not be mixed with other waste. This way, the appliance recycling organised by y\
our manufacturer will be done under the best possible conditions, in complia\
nce with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment. Contact your town hall or your retailer for the used applianc\
e collection points closest to your home.  We thank you doing your part to\
 protect the environment. 
						

							EN3
TABLE OF CONTENTS
1  Your Washing Machine 4
Overview	4
Specifications 5
2  Warnings 6
General Safety 6
First Use 6
Intended use 6
Safety instructions 6
If there are children in your house... 7
Electrical connection 7
3  Installation 9
Removing packaging reinforcement 9
Opening	the	transportation	locks	9
Appropriate installation location 9
Adjusting the feet 9
Connecting to the water supply. 10
Connecting to the drain 10
Electrical connection  11
Destroying the packaging material 11
Disposing of the old machine 11
4  Initial preparations for    
washing 12
Sorting the laundry  12
Preparing	clothes	for	washing	 12
Correct load capacity 12
Loading door 13
Detergents and softeners 13
5  Selecting a Program and 
Operating Your Machine 15
Control panel  15
Turning the machine on 16
Program	selection	16
Spin Speed selection 17
Extra Rinse 18
Program	selection	and	consumption	
table  18
Auxiliary functions 19
Time delay 19
Starting	the	Program	20
Progressing	a	program	20
Changing the program after the program 
has started 20
Child-proof lock 21
Ending the program through canceling 
21
End of program 21
6  Quick instructions for    
daily use 22
7  Cleaning and care 23
Detergent drawer  23
The door and the drum 23
Outer	cabinet	and	control	panel	 23
Inlet water filters 23
Draining any remaining water and 
cleaning the pump filter 24
8  Troubleshooting 26
9  Guarantee 34
10  Service 35 
						

							EN4
Top Lid
Detergent Drawer
Control	Panel
Height-adjustable Feet
Door
Filter Cap
1
2
3
4
5
6
Overview
1  Your Washing Machine
Figure 1
1
2
3
4
5
6 
						

							EN5
Specifications
Specifications of this appliance may change without notice to improve th\
e quality of 
the product. Figures in this manual are schematic and may not match your\
 product 
exactly. 
Values stated on the machine labels or in the documentation accompanying\
 it are 
obtained in laboratory in accordance with the relevant standards.  Depen\
ding on 
operational and environmental conditions of the appliance, values may va\
ry.
Models
Maximum	dry	laundry	capacity	(kg)
Height	(cm)
Width	(cm)
Depth	(cm)
Net	Weight	(kg)
Electricity	(V/Hz.)
Total	Current	(A)
Total	Power	(W)
Spinning	cycle	(rpm	max.)
WM	5140	WWM	5140	S
55
8484
6060
4545
6161
230 V / 50hz230 V / 50hz
1010
22002200
14001400 
						

							EN6
Please	read	the	following	information.	
Otherwise,	there	may	be	the	risk	of	
personal injury or material damage. 
Moreover,	any	warranty	and	reliability	
commitment will become void.
General Safety
•	 Never	place	your	machine	on	a	
carpet	covered	floor.	Otherwise,	
lack of airflow from below your 
machine may cause electrical 
parts to overheat. This may cause 
problems with your washing 
machine.
•	 If	the	power	cable	or	mains	plug	is	
damaged you must call Authorized 
Service for repair.
•	 Check	water	hoses	for	wear.	Do	
not use old/used water inlet hoses. 
These may cause stains on your 
laundry.
•	 Fit	the	drain	hose	into the waste 
water system securely to prevent 
any water leakage and to allow 
machine to take in and discharge 
water as required. It is very 
important that the water intake 
and drain hoses are not folded, 
squeezed, or broken when the 
appliance is pushed into place after 
it is installed or cleaned.
•	 Your	washing	machine	is	designed	
not to continue operating in the 
event	of	a	power	interruption.	You	
cannot cancel any program by 
pressing	the	“On/Off	button.”	Your	
machine will not resume its program 
when	the	power	restores.	Press	
the	“Start/Pause/Cancel”	button	for	
3 seconds to cancel the program 
(See,	Cancelling	a	Program)
•	 There	may	be	some	water	in	your	
machine when you receive it. This is 
from the quality control process and 
is normal. It is not harmful to your 
machine.
•	 Some	problems	you	may	encounter	
may be caused by the software. 
Press	“Start/Pause/Cancel”	button	
for 3 seconds to cancel the program 
set in your machine before calling 
the authorized service.
First Use
•		 To	prepare	your	machine	for	
washing, carry out your first washing 
process without loading your 
machine and with detergent under 
“Cottons	90°C”	program.
•	 Ensure	that	the	cold	water	
connections has been made 
correctly when installing your 
machine.
•	 If	the	current	fuse	or	circuit	breaker	
is less than 15 Amperes, please 
have a qualified electrician install a 
15 Ampere fuse or circuit breaker.
•	 To	make	your	machine	ready	for	
use, please be sure that the tap 
water supply and water drainage 
systems are appropriate before 
calling the authorized service. If they 
are not, call a qualified plumber to 
have any necessary arrangements 
carried out.
Intended use
•	 This	product	has	been	designed	for	
home use.
•		 The	appliance	may	only	be	used	for	
washing and rinsing of textiles that 
are marked accordingly.
•		 Only	detergents,	softeners	and	
supplements suitable for washing 
machines may be used.
•		 Observe	the	care	instructions	
labelled on textile products and 
any other instructions given by 
companies that produce detergents 
for your machine.
Safety instructions
•		 This	appliance	must	be	connected	
to an earthed outlet protected by a 
fuse of suitable capacity.
•		 The	supply	and	draining	hoses	must	
2  Warnings 
						

							EN7
always be securely fastened and 
remain in an undamaged state.
•	 Fit	the	draining	hose	to a washbasin 
or waste system securely before 
starting up your machine. There may 
be a risk of being scalded due to 
high washing temperatures!
•	 Never	open	the	door	or	remove	the	
filter while there is still water in the 
drum.	Otherwise,	there	may	be	the	
risk of flooding and possible injury 
due to the hot water.
•	 Never	force	open	the	locked	door!	
The door will be ready to open just a 
few minutes after the washing cycle 
comes to an end.
•		 Unplug	the	machine	when	it	is	not	in	
use.
•	 Never	wash	down	the	appliance	
with a water hose! There is the risk 
of electric shock! Always disconnect 
from the mains by unplugging before 
cleaning.
•		 Never	touch	the	plug	with	wet	
hands. Never unplug by pulling 
on the cable, always pull out from 
the plug only. Do not operate the 
machine if the power cord or plug is 
damaged.
•	 Never	attempt	to	repair	the	machine	
yourself.	Otherwise,	you	may	be	
putting yours and other’s lives in 
danger.
•		 For	malfunctions	that	cannot	
be solved by information in the 
operating	manual:
 Turn off the machine, unplug it, turn 
off the water tap and contact an 
authorized service agent.
If there are children in your 
house...
•		 Electrical	appliances	may	be	
dangerous	for	the	children.	Keep	
children away from the machine 
when it is operating. Do not let them 
tamper with the machine.
•		 Close	the	door	when	you	leave	the	
area where the machine is located.
•		 Store	all	detergents	in	a	safe	place	
out of reach of the children.
Electrical connection
Make	sure	that	you	have	an	earthed	
power outlet socket rated at 13 amps 
(minimum).
Attention!
If you use your machine as built-in, 
the socket must be reachable after 
installation,	or	a	separate	switch	(which	
can	disconnect	the	two	poles)	must	be	
used in the installation. 
Connect the power cord to the 
appropriate electrical socket with an 
equivalent current rating indicated on the 
rating plate at the front of the machine 
behind the kick plate.
After removing the plug from its transit 
position, please insert the plug seal 
to prevent water spillage entering the 
machine.
Electrical requirements 
Before you insert the plug into the wall 
socket make sure that the voltage and 
the frequency shown in the rating label 
corresponds to your electricity supply.
We recommend that this appliance be 
connected to the mains supply via a 
suitable switched and fused socket in a 
readily accessible position.
Should the mains lead of the appliance 
become damaged or need replacing 
at any time, it must be replaced by a 
special purpose made mains lead which 
can only be obtained from a Authorised 
Service Agent.
B This appliance must be earthed
If the fitted moulded plug is not suitable 
for your socket, then the plug should be 
cut off and an appropriate plug fitted.
Destroy the old plug, which is cut off as 
a plug with a bared cord could cause a 
shock hazard if inserted into a socket 
elsewhere in the house.
The moulded plug on this appliance 
incorporates a 13A fuse. Should the fuse 
need to be replaced an ASTA approved 
BS1362 fuse of the same rating must 
be used. Do not forget to refit the fuse  
						

							EN8
cover. In the event of losing the fuse 
cover, the plug must not be used until a 
replacement fuse cover has been fitted. 
Colour of the replacement fuse cover 
must be the same colour as that visible 
on the pin face of the plug. Fuse covers 
are available from any good electrical 
store.
Important
Fitting a different plug
As the colours of the wires in the 
mains lead of this appliance may not 
correspond with the coloured markings 
identifying the terminals on your plug, 
proceed	as	follows:
1 Connect the green - yellow or green 
(earth)	wire	to	the	terminal	in	the	
plug marked ‘E’ or with the symbol 
f or coloured green and yellow or 
green.
2	 Connect	the	blue	(neutral)	wire	to	
the terminal in the plug marked ‘N’ 
or coloured black.
3	 Connect	the	brown	(live)	wire	to	the	
terminal in the plug marked ‘L’ or 
coloured red.
With the alternative plugs a 13A fuse 
must be fitted either in the plug or 
adaptor or in the main fuse box. If in 
doubt contact a qualified electrician. 
						

							EN9
Removing packaging 
reinforcement
Tilt the machine to remove the 
packaging reinforcement. Remove the 
packaging reinforcement by pulling the 
ribbon.
Opening the transportation 
locks
C Transportation safety bolts must 
be removed before operating the 
washing	machine!	Otherwise,	the	
machine will be damaged!
1.   Loosen all the bolts with a spanner 
until	they	rotate	freely	(“C”)
2.  Remove transportation safety bolts 
by turning them gently.
3.	 Fit	the	covers	(supplied	in	the	bag	
with	the	Operation	Manual)	into	the	
holes	on	the	rear	panel.	(“P”)
C	 Keep	the	transportation	safety	
bolts in a safe place to reuse when 
the washing machine needs to be 
moved again in the future.
C Never move the appliance without 
the transportation safety bolts 
properly fixed in place!
Appropriate installation 
location
Install the appliance in environments 
which have no risk of freezing, in a 
stable and level position.
C The floor must be capable of 
carrying the load on it!
C If the washing machine and a drier 
are placed on top of each other, 
their approximate weight together 
may reach 180 kg when they are 
full.
Important:
•		 Do	not	place	the	appliance	on	top	of	
the power cable.
•		 Keep	at	least	1cm	distance	from	the	
edges of other furniture.
•		 Place	the	machine	on	a	firm	surface;	
do not position it on a long pile rug 
or such like surfaces.
Adjusting the feet
C Do not use any tools to loosen the 
lock	nuts.	Otherwise,	they	can	be	
damaged.
1.		 Manually	(by	hand)	loosen	the	lock	
nuts on the feet.
3  Installation 
						

							EN10
2.  Adjust them until the machine 
stands level and firm.
3.		 Important:	Tighten	all	lock	nuts	up	
again.
Connecting to the water 
supply.
Important:
•		 The	water	supply	pressure	required	
to run the machine must be 1-10 
bar	(0,1	–	1	MPa).	(Practically,	it	is	
necessary	to	have	10	–	80	liters	
of water flowing from the tap in 
one minute to have your machine 
run	smoothly.)	Attach	a	pressure-
reducing valve if the water pressure 
is higher.
•		 Connect	the	special	hose	supplied	
with the machine to the water intake 
valves on the machine.
•	 In	order	to	prevent	water	leakage	
that may occur at the connection 
points,	there	are	rubber	seals	(4	
seals for the models with double 
water inlet and 2 seals for other 
models)	attached	to	the	hoses.	
These seals should be used at the 
tap and machine connection ends of 
the hoses. The plain end of the hose 
fitted with a filter must be attached 
to the tap and the elbowed end 
must be attached to the machine. 
Tighten the nuts of the hose well by 
hand;	never	use	wrenches	to	tighten	
the nuts.
•	 Open	the	taps	completely	after	
making the hose connection to 
check if there is any water leakage 
at the connection points. Turn off 
the tap and remove the nut in case 
of any leakage. Retighten the nut 
carefully after checking the seal. 
To prevent any water leakage and 
any other damage to be caused by 
it, keep the taps closed when the 
machine is not in use.
•	 Models	with	a	single	water	inlet	
should not be connected to the 
hot water tap. Laundry may be 
damaged or the appliance may 
switch to protection mode and not 
work.
When returning the appliance to its 
place after maintenance or cleaning, 
care should be taken not to fold, 
squeeze or block the hoses.
Connecting to the drain
The water discharge hose can be 
attached to the edge of a washbasin 
or waste water system. The drain hose 
should be firmly fitted into the drain as 
to not loosen in its housing.
Important:
•	 The	end	of	the	drain	hose	can	
be directly connected to the 
wastewater drain or to the 
washbasin. The fitting must be 
secured in all types of connections. 
Your	house	may	be	flooded	if	the