BEKO WKD 73500 S User Manual

							31 - EN
7.a 
- Spin Speed Indicator
7.b  - Temperature Indicator
7.c  - Spin Symbol
7.d  - Temperature Symbol
7.e  - Remaining Time and Delaying Time 
Indicator
7.f  - Programme Indicator Symbols (pre-
wash/main wash/rinse/softener/spin)
7.g  - Economy Symbol
7.h  - Time Delaying Symbol
7.i  - Door Locked Symbol
7.j  - Start Symbol
7.k  - Standby Symbol
7.l  - Auxiliary Function Symbols
4  Selecting a Program and Operating Your Machine
1  - Spin Speed Adjustment Button
2  - Time Delaying Button (+/-)
3  - Temperature Adjustment Button
4  - Start/Pause/Cancel Button
5  - Auxiliary Function Keys
  a- Prewash  
b- Quick Wash
  c- Rinse Plus
  d- Anti-creasing
6  - Program Selection Knob
7  - Display
8  - On/Off Button
Turning the machine onPlug in your machine. Turn the tap on 
completely. Check if the hoses are connected 
tightly. Place the laundry in the machine. Add 
detergent and softener. Press the “On/Off” 
button.Program selectionTurn the Programme Selection Knob to the 
program mode that you wish to wash your 
laundry.
The recommended temperature and spin 
speed for the selected program appear. Press 
“Start/Pause/Cancel” button to start the 
program.
Display symbols
Figure 2
Control panelFigure 1
+
Reset
mini
30
super
40
F1 F2F3F43’’
8
6
4
5d
5c
5b
5a
2
1
7 3
 
						

							32 - EN
Main programs 
Depending on the type of textile, the following 
main programs are available:
•Cottons
You can wash your durable clothes with this 
program. Your laundry will be washed with 
vigorous washing movements during a longer 
washing cycle.
•Intensive
You can wash your durable and heavily soiled 
clothes on this program. In this program, your 
clothes will be washed for a longer time and 
an extra rinse cycle will be made compared to 
the “Cottons” program.
•Hand Wash
You can wash your woolen/delicate clothes 
that bear “not machine- washable” labels for 
which hand wash is recommended on this 
program. It washes the laundry with very 
tender washing movements without damaging 
your clothes.
• Mini
This program is used to quickly wash a small 
number of lightly soiled cotton garments.
•Woolens
You can wash your machine-washable woolen 
garments on this program. Wash by selecting 
the proper temperature according to the labels 
of your clothes. It is recommended to use 
appropriate detergents for woolens. 
•Delicates
You can wash your delicate clothes on this 
program. It has more sensitive washing 
movements and does not make intermediate 
spinning compared to “Synthetic” program.
•Synthetics
You can wash your less durable clothes on 
this program. Lighter washing movements 
and shorter washing cycle is used compared 
to “Cottons” program. It is recommended for 
your synthetic clothes (such as shirts, blouses, 
synthetic/cotton blended garments, etc.). For 
curtains and lace, the “Synthetic 40” program 
with pre-wash and anti-creasing functions 
selected is recommended.
Additional programs For special cases, there are also extra 
programs available:
C Additional programs may differ according to 
the model of your machine.
• Baby
Increased hygiene is provided by a longer 
heating period and an additional rinse cycle. It 
is recommended for baby clothes and clothes 
worn by allergic people.
• Super
This program washes for a longer period  at 40°C and gives the same result as the 
“Cottons 60°C” program, thus it saves energy. 
It is suitable for clothes for which you cannot 
use the “Cottons 60°C” program.
C 
Sort the laundry according to type of fabric, 
color, degree of soiling and permissible 
water temperature when choosing a 
program.
Economy Symbol
Shows energy saving programs and 
temperature selections.
As “Intensive” and “Baby” programs are long 
programs with higher temperature selections 
to ensure hygiene, “Economy” Symbol will not 
light up.
Special programsFor specific applications, you can select any of 
the following programs:
• Rinse
This program is used when you want to rinse 
or starch separately.
• Spin
This program spins with maximum possible 
rpm in the default setting.
C  You should use a lower spin speed for 
delicate laundries.
• Pump
This program is used to discharge the water of 
the clothes soaked into water in the machine.
Temperature selectionWhenever a new program is selected, the 
temperature anticipated for that program 
appears on the temperature indicator.
To change the temperature, press the 
“Temperature” button. Temperature decreases 
in 10° increments.
Cold selection is shown with “-” symbol.
90˚C  Normally soiled, white cottons 
and linens.
60˚C  Normally soiled, fade proof 
colored linens, cottons or 
synthetic clothes and lightly 
soiled white linens
40˚C-
30°C- 
Cold   Blended clothes including 
synthetics and woolens as well 
as delicates.
Spin Speed selectionWhenever a new program is selected, the 
maximum spin speed of the selected program 
is displayed on the spin speed indicator.
To decrease the spin speed, press the “Spin” 
button. Spin speed decreases gradually. Then, 
Downloaded From WashingMachine-Manual.com Manualš 
						

							33 - EN
rinse hold and no spin options are shown 
respectively.
Rinse hold is shown with “
” and no spin is 
shown with “
” symbols.
If you do not want to unload your clothes 
immediately after the program, you may use 
the rinse hold function in order to prevent your 
clothes become wrinkled in an anhydrous 
condition. With this function, your laundry is  kept in the final rinsing water. If you want to 
spin your laundry after the rinse hold function:
-  
Adjust the spin speed.
-   Press “Start/Pause/Cancel” button. 
Program resumes. Your machine drains the 
water and spins your laundry. 
You can use no spin function in order to drain 
the water without spinning at the end of the 
program.
Program selection and consumption table
•  Selectable
*  Automatically selected, not cancelable.
** Energy Label program (EN 60456)
*** Spin speed of “Mini” program in washing machines with spin speeds more than 1400rpm is 
maximum 1400 rpm.
Water and power consumption and programme duration may differ from the table shown, 
subject to changes in water pressure, water hardness and temperature, ambient temperature, 
type and amount of laundry, selection of auxiliary functions, and fluctuations in the supply 
voltage.
“Super 40” program may be selected instead of “Cotton 60” programme during winter in areas 
where the input water temperature is low and/or in areas with low supply voltage.
C  The auxiliary functions in the table may differ according to the model of your machine.
Auxiliary functions Temperature
Programme
Max. Load (kg)
Programme Duration 
(~min)
Water Consumption (l)
Energy Consumption 
(kWh)
Spin speed (rpm)
Prewash
Quick Wash
Rinse Plus
Anti-Creasing
Rinse Hold
90
80
70
60
50
40
30
Cold
 Cottons 903.5152 450.98 max. •••••••••••••
 Cottons 60**3.5145 430.66 max. •••••••••••••
 Cottons 403.5133 430.53 max. •••••••••••••
 Super 403.5158 450.73 max. ••
 Intensive 603.5198 561.01 max. *• • •••
 Babycare 903.5138 561.70 max. *•••••••
 Synthetics 602138 430.72 800••••• •••••
 Synthetics 40293 430.46 800••••• •••••
 Delicate 401.575 380.33 600 ••• •••
 Woollens 40167 330.30 600 •• •••
 Hand wash 30149 150.06 600 ••
 Mini 301.530 330.22 max. ••
 
						

							34 - EN
Auxiliary functionsAuxiliary Function Selection ButtonsC Select the required auxiliary functions 
before starting the program.
C Some combinations cannot be selected 
together. (Ex.: Pre-wash) (Figure 1-5a) and 
Quick Wash (Figure 1-5b).
Auxiliary function selection
If an auxiliary function that should not be 
selected together with a previously selected 
function is chosen, the first selected function 
will be cancelled and the last auxiliary function 
selection will remain active.
(Ex.: If you want to select pre-wash first and 
then quick wash, pre-wash will be cancelled 
and quick wash will remain active.
Auxiliary function that is not compatible 
with the program cannot be selected. (see, 
“Program Selection Table”)
Pre-wash
When you select this function (5a), the display 
will indicate “1” symbol. A pre-wash is only 
worthwhile for heavily soiled laundry. Without 
pre-wash you save energy, water, detergent 
and time. Pre-wash without detergent is 
recommended for lace and curtains.
Quick wash
With this function (5b), the wash time is 
shortened. The “2” symbol will light up on the 
display. Use this function for smaller amounts 
or slightly soiled laundries.
Rinse plus
This function (5c) allows your machine to 
perform an extra rinsing in addition to the 
rinsing cycles performed by your machine after 
main washing cycle. Thus, the risk for sensitive 
skins (babies, allergic skins and etc.) to be 
effected by the minimal detergent remnants on 
the laundry is reduced. “3” symbol will light up 
on the display.
Anti-creasing
With this function (5d), drum movement will 
be lessened to prevent creasing and spinning 
speed is limited. In addition, washing is carried 
out at a higher water level. The “4” symbol will 
light up on the display.
C  Whenever you select this auxiliary function, 
load your machine with half of the 
maximum laundry specified in the program 
table.
Time displayThe display shows the time remaining for 
the program to complete while a program is 
running. Program duration may differ from the 
values in the consumption table subject to the 
changes in the water pressure, water hardness  and temperature, ambient temperature, type 
and amount of laundry, auxiliary functions 
selected, and changes in the supply voltage.
Time delay
With the “Time delay” function you can delay 
the program start up to 24 hours. Setting can 
be made in intervals of 30 minutes.
1. 
Press “Time delaying” buttons “+” and “-” 
to set your desired time delay.
2.  Press “Start/Pause/Cancel” button. Then 
the time delay starts to count down. 
C More laundry may be loaded or taken out 
during the time delay period.
Changing the delay time
If you want to change the time during the 
countdown:
1.  Press “Start/Pause/Cancel” button.
2.  Press “Time delaying” buttons “+” or “-” to 
set the desired time delay.
3.  Press “Start/Pause/Cancel” button.
Canceling the time delay
If you want to cancel the time delay 
countdown and start the program immediately:
1.  Press “Start/Pause/Cancel” button.
2.  Pres “Time Delaying” “-” button to 
decrease the time delay. Program duration 
after 30 minutes shall be displayed.
3.  Press “Start/Pause/Cancel” button to start 
the program.
Star ting the Program1. Press “Start/Pause/Cancel” button to start 
the program.
2.  The start symbol (Figure 2-7j) which 
indicates that the program has started will 
light up.
3.  The door locks and the door locked 
symbol (Figure 2-7i) will light up.
4.  The Symbol of the relevant step (prewash, 
main wash, rinse, softener and spin) that 
the program has started from will light up 
(Figure 2-7f).
C If the machine is not spinning, the 
program may be in rinse hold mode or the 
automatic spin correction system has been 
activated due to an excessive unbalanced 
distribution of laundry in the machine.
Changing the selections after the 
program has star ted
The selected spin speed and program 
temperature fade out. An empty frame 
appears.
When the “Program selection” button is 
Downloaded From WashingMachine-Manual.com Manualš 
						

							35 - EN
brought to the appropriate position, rpm and 
temperature data reappear.
Switching the machine to standby 
mode
Press “Start/Pause/Cancel” button 
momentarily to switch your machine to the 
standby mode. Auxiliary functions can be 
cancelled or selected in accordance with 
the step the program is at. The door can be 
opened if the water level is suitable. Laundry 
may be added / taken out by opening the 
door.
Door lock
The Door Locked Symbol (Figure 2-7i) lights 
up when the loading door is locked. This 
symbol will flash until the door is allowed to 
open. Do not force the door at this stage. You 
may open the door after the symbol fades out.
Child-proof lockYou can protect the appliance from being 
tampered by children by means of the child-
proof lock. In this case, no change can be 
made in the running program.
The machine is switched to child-lock by 
pressing the 2nd and 4th auxiliary functions 
for 3 sec. “C:on” (Child lock is activated) label 
appears on the screen. The same symbol 
will also be displayed whenever any button is 
pressed while the machine is child-locked.
To deactivate the child-proof lock, press the 
2nd and 4th auxiliary function buttons for 3 
sec. “C:OFF” (Child lock is deactivated) label 
appears on the screen.
Ending the program through 
canceling
“Start/Pause/Cancel” button is pressed for 3 
seconds to cancel the program. Start symbol 
(Figure 2-7j) will flash during cancellation. After 
cancellation, the symbol of the corresponding 
step at which the cancellation was made will 
remain lit and “End” will appear on the screen.
End of programWhen the program is finished, the symbols 
of the relevant steps will remain lit up and 
the auxiliary function, spin and temperature 
data selected at the start-up of the program 
will remain selected. “End” will appear on the 
display.
5 Maintenance and cleaning
Detergent DrawerRemove any powder residue buildup in the 
drawer. To do this;
1. 
Press the dotted point on the siphon in the 
softener compartment and pull towards 
you until the compartment is removed from 
the machine.
C If more than a normal amount of water 
and softener mixture starts to gather in the 
softener compartment, the siphon must be 
cleaned.
2.  Wash the dispenser drawer and the 
siphon with plenty of lukewarm water in a 
washbasin. 
3.  Replace the drawer into its housing after 
cleaning.  Check if the siphon is in its 
original location.
Inlet water filtersThere is a filter at the end of each water intake 
valve at the back side of the machine and also 
at the end of each water intake hose where 
they are connected to the tap. These filters 
prevent the foreign substances and dirt in the 
water to enter into the machine. Filters should 
be cleaned as they get dirty.
• Close the taps.
•  Remove the nuts of the water intake hoses 
to clean the surfaces of the filters on the 
water intake valves with an appropriate 
brush.
•  If the filters are very dirty, you can pull them 
out by means of pliers and clean them.
•  Take out the filters on the flat ends of 
the water intake hoses together with 
the gaskets and clean thoroughly under 
streaming water.
•  Replace the gaskets and filters carefully to 
their places and tighten the hose nuts by 
hand.
Downloaded From WashingMachine-Manual.com Manualš 
						

							36 - EN
Draining any remaining water and 
cleaning the pump filter
Your product is equipped with a filter system 
which ensures a cleaner water discharge that 
extends pump life by preventing solid items 
such as buttons, coins and fabric fibers from 
clogging the pump propeller during discharge 
of the washing water.
•  If your machine fails to drain the water, 
the pump filter may be clogged. You may 
have to clean it every 2 years or whenever 
it is plugged. Water must be drained off to 
clean the pump filter. 
In addition, water may have to be drained off 
completely in the following cases:
•   before transporting the machine (e.g. when 
moving house)
•   when there is the danger of frost
In order to clean the dirty filter and discharge 
the water;
1- Unplug the machine to cut off the supply 
power.
A  There may be water at 90°C in the 
machine. Therefore, the filter must be 
cleaned only after the inside water is 
cooled down to avoid hazard of scalding.
2- Open the filter cap. The filter cap may be 
composed of one or two pieces according to 
the model of your machine.
If it is composed of two pieces, press the tab 
on the filter cap downwards and pull the piece 
out towards yourself.
If it is composed of one piece, hold it from 
both sides and open it by pulling out.
3- An emergency drain hose is supplied with 
some of our models. Others are not supplied 
with this item.
If your product is supplied with an emergency 
drain hose, do the following as shown in the 
figure below:
•  Pull out the pump outlet hose from its 
housing.
•   Place a large container at the end of the 
hose. Drain the water off into the container 
by pulling out the plug at the end of the 
hose. If the amount of water to be drained 
off is greater than the volume of the 
container, replace the plug, pour the water 
out, then resume the draining process.
•   After draining process is completed, 
replace the plug into the end of the hose 
and fit the hose back into its place.
If your product is not supplied with an 
emergency drain hose, do the following as 
shown in the figure below:
•   Place a large container in front of the filter 
to receive water flowing from the filter.
•   Loosen pump filter (anticlockwise) until 
water starts to flow out of it. Direct the 
flowing water into the container you have 
placed in front of the filter. You can use a 
piece of cloth to absorb any spilled water.
•   When there is no water left, turn the pump 
filter until it is completely loose and remove 
it.
•   Clean any residues inside the filter as 
well as fibers, if any, around the propeller 
region.
•   If your product has a water jet feature, be 
sure to fit the filter into its housing in the 
pump. Never force the filter while replacing 
it into its housing. Fit the filter fully into its 
housing; otherwise, water may leak from 
the filter cap.
4- Close the filter cap.
Close the two-piece filter cap of your product 
by pushing the tab on it.
Close the one-piece filter cap of your product 
by fitting the tabs on the bottom into their 
positions and pushing the upper part of it.
Downloaded From WashingMachine-Manual.com Manualš 
						

							37 - EN
6 Solution suggestions for problems
ProblemCause Explanation / Suggestion
Program cannot 
be started or 
selected.  Machine may have 
switched to self 
protection mode due to 
an infrastructure problem 
(such as line voltage, water 
pressure, etc.). Reset your machine by pressing “Start/Pause/
Cancel” button for 3 seconds. (see, Canceling 
a Program)
There is water 
coming from 
the bottom of 
the machine. There might be problems 
with hoses or the pump 
filter. Be sure the seals of the water inlet hoses are 
securely fitted.
Tightly attach the drain hose to the tap.
Make sure that the pump filter is completely 
closed.
Machine 
stopped 
shortly after 
the program 
started. Machine can stop 
temporarily due to low 
voltage.
It will resume operating when the voltage is 
back to the normal level.
It continuously 
spins.
Remaining time 
does not count 
down. There may be an imbalance 
of laundry in the machine. The automatic spin correction system might 
have been activated due to the unbalanced 
distribution of the laundry in the drum.
The laundry in the drum may be clustered 
(bundled laundry in a bag). Laundry should be 
rearranged and re-spun.
No spinning is performed when the laundry is 
not evenly distributed in the drum to prevent 
any damage to the machine and to its 
environment.
It continuously 
washes.
Remaining time 
does not count 
down. In the case of a paused 
countdown while taking in 
water:
Timer will not countdown 
until the machine is filled 
with the correct amount of 
water.
The machine will wait until there is a sufficient 
amount of water to avoid poor washing results 
due to lack of water. Then the timer will start to 
count down.
In the case of a paused 
countdown at the heating 
step:
Time will not count 
down until the selected 
temperature for the 
program is reached
In the case of a paused 
countdown at the spinning 
step:
There may be an imbalance 
of laundry in the machine. The automatic spin correction system might 
have been activated due to the unbalanced 
distribution of the laundry in the drum.
The laundry in the drum may be clustered 
(bundled laundry in a bag). Laundry should be 
rearranged and re-spun.
No spinning is performed when the laundry is 
not evenly distributed in the drum to prevent 
any damage to the machine and to its 
environment.
Downloaded From WashingMachine-Manual.com Manualš 
						

							38 - EN
WKD 73500WKD 73500 S WKD 73580WKD 73520
3.5 3.5 3.5 3.5
84 84 84 84
60 60 60 60
35 35 35 35
57 57 57 57
230 V / 50hz 230 V / 50hz 230 V / 50hz 230 V / 50hz
10 10 10 10
1700 1700 1700 1700
1000 1000 8001200
7  Specifications
Specifications of this appliance may change without notice to impr ove the quality of the product. 
Figures in this manual are schematic and may not match your product exactly.
Values stated on the machine labels or in the documentation accompanying it are obtained 
in laboratory in accordance with the relevant standards.  Depending on operational and 
environmental conditions of the appliance, values may vary.
Models
Maximum dry laundry capacity (kg)
Height (cm)
Width (cm)
Depth (cm)
Net Weight (kg)
Electricity (V/Hz.)
Total Current (A)
Total Power (W)
Spinning cycle (rpm max.)
Obalový material spotřebiče je recyklovatelný. Napomozte jej recyklovat a ochraňujte 
životní prostředí jeho předáním do městských center určených pro tento účel. 
Váš spotřebič take obsahuje velké množství recyklovatelného materiálu. Je označen 
touto etiketou, jež znamená, že použité spotřebiče by se neměly směšovat s ostatním 
odpadem. Recyklace spotřebičů organizovaná vaším výrobcem bude tak provedena v 
souladu s Evropskou směrnicí 2002/96/EC o Likvidaci elektrického a elektronického vybavení. 
Kontaktujte městský úřad nebo prodejce kvůli nejbližším bodům recyklace u vašeho bydliště.
Děkujeme za váš příspěvek k ochraně životního prostředí.
On/Off Reset
3 sn. Coton
Start
Pause S
ynthetics
Woollens
DelicateBabycare
Intensive Hand
wash
Express
Rinse
hold Quick
wash Anti
creasing Rinse
plus Time
delay
Prewash Main
wash Drain
Rinse SpinNo
spin No
heat
Temperature
Wash
End
Child
lock
Door
ready Cold
Duvet
Sport Shirt
Conditioner
Reset3’
’8
 
						

							Downloaded From WashingMachine-Manual.com Manual• 
						

							.........................
........................ .
........................ .
3
3
........................
.
........................ .
........................ .
2
2
........................
.
........................ .
........................ .
1
1
Действ
ует то лько на территории РФ /  \/аlid f or Russian Federation only
ГАРАНТИЯ 2 Г ОДААдрес: 105264, Р оссия, г. Москва, Измайловский б-р, д. 43
Т елефон cлужбы сервиса  8-80 0-200-23-56 (Звонок беспла тный на всей территории Р оссии)http://www .bеко.ru
Гарантийный талон серия RUS
Мо дель.
Дата про дажи Серийный номер
К омпания
По дпись про давца Дата у
становки
К омпания
По дпись мастера
ПЕЧА ТЬ ПЕЧАТЬ
Покупатель
Фамилия,  Имя, Отчество
Изделие по лучено в по лной комплектации,
проверялось в прис утствии покупателя.
Покупатель с у словиями гарантии ознак омлен.
Подпись Покупа теля
Отрывные купоны г арантийного талона являются средством отчетности о
выпо лнении сервисным центром г арантийных работ. Купон изымается из
га рантийног о талона после у довлетворения Ваших претензий.
серия RUS
Да та про дажи серия RUS
Да
та про дажи серия RUS
Да
та про дажи
ПЕЧА ТЬ
МАГ АЗИНА ПЕЧА
ТЬ
МАГ АЗИНА ПЕЧА
ТЬ
МАГ АЗИНА
ГАРАНТИЯ
2 Г ОДА ГА
РАНТИЯ
2 Г ОДА ГА
РАНТИЯ
2 Г ОДА
Место для наклейки к ода изделия
Downloaded From WashingMachine-Manual.com Manual•