Beko Dsfn 1530 B Manual
Have a look at the manual Beko Dsfn 1530 B Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 187 Beko manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 36
33
Dishes are not dry at the end of cycle
• Dishes are not placed orderly in the machine. >>> Place your dishes in a
way that no water will accumulate in them.
• Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse
aid if necessary. Increase the rinse aid setting if there is enough amount of
rinse aid in the machine.
• Machine is unloaded right after the programme is over. >>> Do not unload
your machine right after washing process is completed. Slightly open the\
door and...](http://img.usermanuals.tech/thumb/783/96530/w64_dsfn-1530-b-manual-1506015061_d-35.png "Page 36
33
Dishes are not dry at the end of cycle
• Dishes are not placed orderly in the machine. >>> Place your dishes in a
way that no water will accumulate in them.
• Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse
aid if necessary. Increase the rinse aid setting if there is enough amount of
rinse aid in the machine.
• Machine is unloaded right after the programme is over. >>> Do not unload
your machine right after washing process is completed. Slightly open the\
door and...")
![Page 37
34
Lime traces remain on dishes and glassware gains a misty appearance
• Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse
aid if necessary. Increase the rinse aid setting if there is enough amount of
rinse aid in the machine.
• Water hardness setting is low or salt level is insufficient >>> Measure the
hardness of the supply water appropriately and check the water hardness \
setting.
• Salt leakage exists. >>> Pay attention not to spill salt around the salt filling
hole...](http://img.usermanuals.tech/thumb/783/96530/w64_dsfn-1530-b-manual-1506015061_d-36.png "Page 37
34
Lime traces remain on dishes and glassware gains a misty appearance
• Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse
aid if necessary. Increase the rinse aid setting if there is enough amount of
rinse aid in the machine.
• Water hardness setting is low or salt level is insufficient >>> Measure the
hardness of the supply water appropriately and check the water hardness \
setting.
• Salt leakage exists. >>> Pay attention not to spill salt around the salt filling
hole...")
![Page 38
35
Rust, discoloration or surface deterioration occurs on dishes
• Salt leakage exists. >>> Salt may cause deterioration and oxidation on
metal surfaces. Pay attention not to spill salt around the salt filling \
hole
while adding salt. Make sure that the salt reservoir lid is tightly clos\
ed after
finishing the filling process. Run the prewash programme to remove the s\
alt
that spilled inside the machine. Since the salt granules that will remai\
n under
the lid will dissolve during prewash,...](http://img.usermanuals.tech/thumb/783/96530/w64_dsfn-1530-b-manual-1506015061_d-37.png "Page 38
35
Rust, discoloration or surface deterioration occurs on dishes
• Salt leakage exists. >>> Salt may cause deterioration and oxidation on
metal surfaces. Pay attention not to spill salt around the salt filling \
hole
while adding salt. Make sure that the salt reservoir lid is tightly clos\
ed after
finishing the filling process. Run the prewash programme to remove the s\
alt
that spilled inside the machine. Since the salt granules that will remai\
n under
the lid will dissolve during prewash,...")
![Page 39
36
Detergent remains in detergent dispenser.
• Detergent dispenser was damp when adding detergent. >>> Make sure that
the detergent dispenser is dried well prior to filling it with detergent\
.
• Detergent is added long before the washing process. >>> Pay attention to
add detergent shortly before start-up of the washing.
• Opening of the detergent dispenser lid is prevented during washing. >>> \
Place the dishes in a way that will not prevent the detergent dispenser \
lid
from opening and the water...](http://img.usermanuals.tech/thumb/783/96530/w64_dsfn-1530-b-manual-1506015061_d-38.png "Page 39
36
Detergent remains in detergent dispenser.
• Detergent dispenser was damp when adding detergent. >>> Make sure that
the detergent dispenser is dried well prior to filling it with detergent\
.
• Detergent is added long before the washing process. >>> Pay attention to
add detergent shortly before start-up of the washing.
• Opening of the detergent dispenser lid is prevented during washing. >>> \
Place the dishes in a way that will not prevent the detergent dispenser \
lid
from opening and the water...")
![Page 40
37
A smear remains on glasses that resembles milk stain which can not be
removed when wiped by hand. A bluish / rainbow appearance occurs when
the glass is pointed to light.
• Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled
rinse aid when adding rinse aid.
• Corrosion has occurred on glass due to soft water. >>> Measure the
hardness of the supply water appropriately and check the water hardness \
setting. If your supply water is soft (>> Hand-wash detergents do not contain...](http://img.usermanuals.tech/thumb/783/96530/w64_dsfn-1530-b-manual-1506015061_d-39.png "Page 40
37
A smear remains on glasses that resembles milk stain which can not be
removed when wiped by hand. A bluish / rainbow appearance occurs when
the glass is pointed to light.
• Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled
rinse aid when adding rinse aid.
• Corrosion has occurred on glass due to soft water. >>> Measure the
hardness of the supply water appropriately and check the water hardness \
setting. If your supply water is soft (>> Hand-wash detergents do not contain...")
