Beko Din 1530 N Manual

							20GB
1065
�
�
Upper basket with variable height 
setting
(depends on the model)
The upper basket is equipped with a 
lifting mechanism which enables you 
to change the height of the basket 
without having to remove it from the 
dishwasher, even if it is fully loaded.
The height of the upper basket was 
set to its lowest position at the factory. 
To lift the upper basket to the “high” 
(A) position, hold it on one side and 
carefully pull it upwards. To lift the 
opposite side of the basket, hold it and 
pull it upwards in the same manner (A).
To lower the upper rack, hold and 
press in the rack lever on one side 
and carefully lower the rack without 
releasing the lever (B). Repeat the 
procedure with the lever on the 
opposite side of the basket. Make sure 
that both levers catch at the same 
height. 
						

							21GB
1067
1022
�
�
�
Height setting with empty basket
(depends on the model) 
In this model, the height setting of the 
upper basket may be changed using 
the wheels which are mounted at two 
different heights.
Release the latches on both the right 
and left tracks of the upper basket by 
pushing them outwards (C).
Pull out the basket out completely (D).
Place the basket back into the tracks at 
the desired height (E).
Push the latches back into the correct 
position.
Folding Tines
(depends on the model)
There are "folding tines" in the upper 
rack to allow you more space to 
accommodate glasses or cups.
Simply pull in the first front folding tine, 
move it to left (A) and right (B) to place 
in another positon. When you need, 
take the tines down until the tines fall 
down.
�� 
						

							22GB
1023
1026
1025
Glass Support
(depends on the model)
When placing the glasses or goblets 
with a long grip, lean them against the 
glass support, the edge of the basket 
or the shelf but not against the other 
pieces. Do not lean the long glasses 
against each other, otherwise they do 
not remain stable during washing cycle 
and may get damaged.
When you need to place the bulky 
pieces into the upper basket, 
disconnect the lug of the glass support 
from the bar of the basket where it is 
attached to. Thus, you will acquire a 
wider place.
Upper Basket Drawer
(depends on the model)
You can easily place additional desert 
spoons, small forks and knives into the 
drawer installed to the upper basket of 
your machine. 
�
��
Rack
(depends on the model)
Depending on the size of the glasses 
and cups, the rack height setting may 
be adjusted (C, D, E). 
						

							23GB
5How to clean your dishwasher
Cleaning your machine at regular 
intervals ensures longer product life 
and reduces the risk of reccurring 
problems.
 Always unplug the machine and 
turn off the water supply before 
cleaning. Use a gentle household 
cleaner for the outside and the door 
seals. Clean the control panel only with 
a moist cloth and clear water.
Cleaning the filters
Clean the filters and the spray arms 
regularly. A dirty machine will have a 
negative effect on the cleaning results.
1. Main filter
2. Coarse filter
3. Micro filter
1. Remove the lower basket from the 
machine.
2. Turn the coarse filter to the right 
and pull it out in an upward 
direction (A). 
3. Pull out the main filter (B).
4. Press on the two tongues of the 
coarse filter and remove the micro 
filter (C).
5. Clean the filters thoroughly under 
running water. Use a brush if 
necessary.
6. Replace main fitler.
7. Replace the micro filter and the 
coarse filter into the main filter. 
Twist it clockwise until it clicks in.
 Do not operate your dishwasher 
without a filter. Ensure that your filters 
are correctly installed. Clean the filters 
regularly.
1031
�
�
�
�
�
� 
						

							24GB
Cleaning the spray arms
Dirt or calcium residue may block the 
nozzles on the spray arms. For this 
reason, regularly check the spray 
nozzles.
1.  Lower spray arm
2.  Upper spray arm
1.  Remove the lower basket from the 
machine.
2.  Pull off the lower spray arm in an 
upward direction (A).
3.  Loosen the fastening screw of the 
upper spray arm and pull off the 
spray arm (B).
4.  Clean the spray arms under 
running water.
5.  Replace the spray arms.
 Ensure that the fastening screws are 
screwed tight.
1032
Cleaning the filter inset in the water 
inlet hose (depends on the model)
Dirt from deposits in the water pipes is 
prevented by a filter in the water inlet 
hose. Check the filter and the water 
inlet from time to time.
1.  Close the water tap and unscrew 
the water inlet hose.
2.  Take out the filter and clean it 
under running water.
3.  Replace the cleaned filter.
4.  Fasten the water inlet hose to the 
water tap again.
�
�
�
� 
						

							25GB
Troubleshooting:
What to do if the dishwasher will not run
•	Check that the mains plug is properly connected.
•	Are all fuses working?
•	Is the water supply fully turned on?
•	Is the dishwasher door closed firmly?
•	Have you pressed the On/Off button?
•	Is the filter on the water intake and dishwasher clogged?
The cleaning results are unsatisfactory
1033
Uncleaned Dishes
Disorderly placement
-	Load your dishes as described in the manual.
Program selection
-	For products with program selecting feature, choose a longer program that 
washes in higher temperatures.
Blocked impellers
-	Prior to starting the program, ensure by turning by hand that the upper \
and 
lower impellers are freely rotating.
Clogged filters
-	From time to time, remove the complete filter system as shown in the man\
ual 
and wash it under flowing water. 
Misplaced or displaced filters
-	After washing the filter system, replace them as shown in the manual.
Clogged impeller holes
-	Take out and clean the impellers from time to time as shown in the figure.
Overloading the baskets
-	Do not overload the baskets in excess of their capacity
Detergent kept under unsuitable conditions
-	If you are using powder detergents, do not store them in humid places after 
you open their boxes. Keep them in a closed container, if possible. For ease-
of-storing, we recommend you to use tablet detergents.
Inadequate detergent
-	If you are using powder detergents, adjust the amount of detergent 
according to the soiling degree of your dishes and/or program definition\
s. We 
recommend you to use tablet detergents for optimum results.
6  
						

							26GB
1034
Inadequate rinse aid
-	Increase rinse aid setting or add rinse aid into rinse aid compartment.
Unsealed detergent dispenser lid
-	Always ensure that the detergent compartment lid is closed tightly after\
 every 
detergent filling process.
Drying
Disorderly placement
-	Load your dishes as described in the manual.
Inadequate rinse aid
-	Increase rinse aid setting or add rinse aid into rinse aid compartment.
Unloading the machine right after dishwashing
-	Do not unload your dishwasher right after washing process is completed. 
Slightly open the door and wait for evacuation of the inside steam for a\
 while. 
Unload the dishes after the pieces cool down to a touchable level. Start\
 
unloading process from the lower basket.
Program Selection
-	For products with program selecting feature, choose a longer program that 
washes in higher temperatures.
Tea, Coffee And Lipstick Stains
Program Selection
-	For products with program selecting feature, choose a longer program that 
washes in higher temperatures.
Detergent kept under unsuitable conditions
-	If you are using powder detergents, do not store them in humid places after 
you open their boxes. Keep them in a closed container, if possible.
-	For ease-of-storing, we recommend you to use tablet detergents.
Usage of silverware-kitchenware with corrupted surface quality
-	Silverware or kitchenware with corrupted surface quality should not be 
washed in dishwashers.  
						

							27GB
Inadequate rinse aid
-	Increase rinse aid setting or add rinse aid into rinse aid compartment.
Insufficient water softening
-	In products equipped with water softening setting, water softening should be 
properly set in accordance with the hardness of the supply water. Add salt 
into the salt container, if necessary.
Salt leakage*
-	Use the supplied salt funnel while filling in softening salt. Make sure that 
the salt box cover is tightly closed after finishing the filling process\
. Run a 
washing program to clean up the salts spilled in the machine. Recheck th\
e 
salt box cover after the program is completed.
Metallic Look In Bluish Rainbow Color
Excessive rinse aid
-	Lower rinse aid setting.
1035
Lime Stains, Hazy Look
Glass corrosion due to soft water
-	In products equipped with water softening setting, water softening should 
be properly set in accordance with the hardness of the supply water. If your 
supply water is soft (
						

							28GB
1037
1041
Kitchenware containing Aluminum
-	Kitchenware that contains aluminum should not be washed in dishwashers.
Salt leakage*
-	Use the supplied salt funnel while filling in softening salt. Make sure that 
the salt box cover is tightly closed after finishing the filling process\
. Run a 
washing program to clean up the salts spilled in the machine. Recheck th\
e 
salt box cover after the program is completed.
Low water softening setting, inadequate salt*
-	In products equipped with water softening setting, water softening should be 
properly set in accordance with the hardness of the supply water. Add salt 
into the salt container, if necessary.
Detergent kept under unsuitable conditions
-	If you are using powder detergents, do not store them in humid places after 
you open their boxes. Keep them in a closed container, if possible. For ease-
of-storing, we recommend you to use tablet detergents.
Overloading the baskets
-	In order to avoid scratches and breaks in glasses and other glass tablew\
are 
because of collision with each other during washing process arising from\
 their 
placement, do not overload the baskets in excess of their capacity.
Unsealed closing of the salt box cover*
-	Salt may cause oxidation on metal surfaces. Use the supplied salt funnel 
while filling in softening salt. Make sure that the salt box cover is ti\
ghtly 
closed after finishing the filling process. Run a washing program to cle\
an up 
the salts spilled in the machine. Recheck the salt box cover after the p\
rogram 
is completed.
Grounding line
-	Check if your dishwasher is connected to the actual grounding line. 
Otherwise, the static electric created in the dishwasher may remove the \
protective coating on metal surfaces and cause blackening and corruption\
.
Rusts, Blackening And Corruption Of Surface
Scratch / Break In Glassware   
						

							29GB
1038
 
1043
Detergent Remains In The Detergent 
Dispenser
Damp detergent compartment
-	Make sure that the detergent dispenser is well dried prior to filling it\
 with 
detergent.
Putting detergent in the detergent dispenser long before washing
-	Take care that detergent is put shortly before startup of washing.
Blocking the opening of detergent dispenser lid dwing washing
-	Ensure that the lid of detergent dispenser is not blocked by improper lo\
aded 
dishes. The detergent dispenser lid should op/en without any block during 
washing.
Detergent kept under unsuitable conditions
-	If you are using powder detergents, do not store them in humid places after 
you open their boxes. Keep them in a closed container, if possible. For ease-
of-storing, we recommend you to use tablet detergents.
Clogged impeller holes
-	Take out and clean the impellers from time to time as shown in the figure.
Clogged filters
-	From time to time, remove the complete filter system as shown in the man\
ual 
and wash it under flowing water. 
Blocking / twisting of drainage hose
-	Connect the drainage hose as described in the manual.
Odour
Odor of new dishwasher
-	A new dishwasher has a peculiar odor. It will fade out after a couple of 
washing.
Clogged filters
-	From time to time, remove the complete filter system as shown in the man\
ual 
and wash it under flowing water.
Water Remained In The Dishwashing 
Compartment After Washing