Beko Dfn 6833 B Manual
Here you can view all the pages of manual Beko Dfn 6833 B Manual. The Beko manuals for Dishwasher are available online for free. You can easily download all the documents as PDF.
Page 41
38 Troubleshooting Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. • Door of the machine is open. >>> Make sure that you have closed the door of the machine. • On / Off button is not pressed. >>> Make sure that you have turned on the machine by pressing the On / Off button. Dishes are not washed clean • Dishes are not placed orderly in the...
Page 42
![Page 42
39
Dishes are not dry at the end of cycle
• Dishes are not placed orderly in the machine. >>> Place your dishes in a
way that no water will accumulate in them.
• Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse
aid if necessary. Increase the rinse aid setting if there is enough amount of
rinse aid in the machine.
• Machine is unloaded right after the programme is over. >>> Do not unload
your machine right after washing process is completed. Slightly open the\
door and...](http://img.usermanuals.tech/thumb/783/96533/w300_dfn-6833-b-manual-1506017582_d-41.png "Page 42
39
Dishes are not dry at the end of cycle
• Dishes are not placed orderly in the machine. >>> Place your dishes in a
way that no water will accumulate in them.
• Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse
aid if necessary. Increase the rinse aid setting if there is enough amount of
rinse aid in the machine.
• Machine is unloaded right after the programme is over. >>> Do not unload
your machine right after washing process is completed. Slightly open the\
door and...")
39 Dishes are not dry at the end of cycle • Dishes are not placed orderly in the machine. >>> Place your dishes in a way that no water will accumulate in them. • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. • Machine is unloaded right after the programme is over. >>> Do not unload your machine right after washing process is completed. Slightly open the\ door and...
Page 43
![Page 43
40
Lime traces remain on dishes and glassware gains a misty appearance
• Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse
aid if necessary. Increase the rinse aid setting if there is enough amount of
rinse aid in the machine.
• Water hardness setting is low or salt level is insufficient >>> Measure the
hardness of the supply water appropriately and check the water hardness \
setting.
• Salt leakage exists. >>> Pay attention not to spill salt around the salt filling
hole...](http://img.usermanuals.tech/thumb/783/96533/w300_dfn-6833-b-manual-1506017582_d-42.png "Page 43
40
Lime traces remain on dishes and glassware gains a misty appearance
• Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse
aid if necessary. Increase the rinse aid setting if there is enough amount of
rinse aid in the machine.
• Water hardness setting is low or salt level is insufficient >>> Measure the
hardness of the supply water appropriately and check the water hardness \
setting.
• Salt leakage exists. >>> Pay attention not to spill salt around the salt filling
hole...")
40 Lime traces remain on dishes and glassware gains a misty appearance • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. • Water hardness setting is low or salt level is insufficient >>> Measure the hardness of the supply water appropriately and check the water hardness \ setting. • Salt leakage exists. >>> Pay attention not to spill salt around the salt filling hole...
Page 44
![Page 44
41
Rust, discoloration or surface deterioration occurs on dishes
• Salt leakage exists. >>> Salt may cause deterioration and oxidation on
metal surfaces. Pay attention not to spill salt around the salt filling \
hole
while adding salt. Make sure that the salt reservoir lid is tightly clos\
ed after
finishing the filling process. Run the prewash programme to remove the s\
alt
that spilled inside the machine. Since the salt granules that will remai\
n under
the lid will dissolve during prewash,...](http://img.usermanuals.tech/thumb/783/96533/w300_dfn-6833-b-manual-1506017582_d-43.png "Page 44
41
Rust, discoloration or surface deterioration occurs on dishes
• Salt leakage exists. >>> Salt may cause deterioration and oxidation on
metal surfaces. Pay attention not to spill salt around the salt filling \
hole
while adding salt. Make sure that the salt reservoir lid is tightly clos\
ed after
finishing the filling process. Run the prewash programme to remove the s\
alt
that spilled inside the machine. Since the salt granules that will remai\
n under
the lid will dissolve during prewash,...")
41 Rust, discoloration or surface deterioration occurs on dishes • Salt leakage exists. >>> Salt may cause deterioration and oxidation on metal surfaces. Pay attention not to spill salt around the salt filling \ hole while adding salt. Make sure that the salt reservoir lid is tightly clos\ ed after finishing the filling process. Run the prewash programme to remove the s\ alt that spilled inside the machine. Since the salt granules that will remai\ n under the lid will dissolve during prewash,...
Page 45
![Page 45
42
Detergent remains in detergent dispenser.
• Detergent dispenser was damp when adding detergent. >>> Make sure that
the detergent dispenser is dried well prior to filling it with detergent\
.
• Detergent is added long before the washing process. >>> Pay attention to
add detergent shortly before start-up of the washing.
• Opening of the detergent dispenser lid is prevented during washing. >>> \
Place the dishes in a way that will not prevent the detergent dispenser \
lid
from opening and the water...](http://img.usermanuals.tech/thumb/783/96533/w300_dfn-6833-b-manual-1506017582_d-44.png "Page 45
42
Detergent remains in detergent dispenser.
• Detergent dispenser was damp when adding detergent. >>> Make sure that
the detergent dispenser is dried well prior to filling it with detergent\
.
• Detergent is added long before the washing process. >>> Pay attention to
add detergent shortly before start-up of the washing.
• Opening of the detergent dispenser lid is prevented during washing. >>> \
Place the dishes in a way that will not prevent the detergent dispenser \
lid
from opening and the water...")
42 Detergent remains in detergent dispenser. • Detergent dispenser was damp when adding detergent. >>> Make sure that the detergent dispenser is dried well prior to filling it with detergent\ . • Detergent is added long before the washing process. >>> Pay attention to add detergent shortly before start-up of the washing. • Opening of the detergent dispenser lid is prevented during washing. >>> \ Place the dishes in a way that will not prevent the detergent dispenser \ lid from opening and the water...
Page 46
![Page 46
43
A smear remains on glasses that resembles milk stain which can not be
removed when wiped by hand. A bluish / rainbow appearance occurs when
the glass is pointed to light.
• Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled
rinse aid when adding rinse aid.
• Corrosion has occurred on glass due to soft water. >>> Measure the
hardness of the supply water appropriately and check the water hardness \
setting. If your supply water is soft (>> Hand-wash detergents do not contain...](http://img.usermanuals.tech/thumb/783/96533/w300_dfn-6833-b-manual-1506017582_d-45.png "Page 46
43
A smear remains on glasses that resembles milk stain which can not be
removed when wiped by hand. A bluish / rainbow appearance occurs when
the glass is pointed to light.
• Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled
rinse aid when adding rinse aid.
• Corrosion has occurred on glass due to soft water. >>> Measure the
hardness of the supply water appropriately and check the water hardness \
setting. If your supply water is soft (>> Hand-wash detergents do not contain...")
43 A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish / rainbow appearance occurs when the glass is pointed to light. • Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when adding rinse aid. • Corrosion has occurred on glass due to soft water. >>> Measure the hardness of the supply water appropriately and check the water hardness \ setting. If your supply water is soft (>> Hand-wash detergents do not contain...
Page 47
www.beko.com