Barco Projector Cineversum 70 User Manual

 
 
Copyright ©  
All rights reserved. No part of this document may be copied, reproduced or translated. It shall not otherwise be recorded, transmitted or stored 
in a retrieval system without the prior written consent of BARCO. 
Changes 
Barco provides this manual ’as is’ without warranty of any kind, either expressed or implied, including but not limited to the implied warranties 
of merchantability and fitness for a particular purpose. Barco may make improvements and/or changes to the product(s)...

Table of contents 
  R5976691 CINE VERSUM 70/60 12042004 
 1 
 
TABLE OF CONTENTS 
1. SAFETY INSTRUCTIONS .......................................................................................................... 3 
1.1 General Safety Instructions ....................................................................................................................................................... 3 1.2 Projector Related Safety Information...

Table of contents 
  2 
 R5976691 CINE VERSUM 70/60 12042004 
    

1.  Safety Instructions 
  R5976691 CINE VERSUM 70/60 12042004 
 3 
 
1. SAFETY INSTRUCTIONS 
Overview 
• General Safety Instructions 
• Projector Related Safety Instructions 
 This manual is intended for the user/operator of the installed projector. Any change in cabling or servicing of the 
installed projector must be performed by service personnel having appropriate technical training and experience 
necessary to be knowledgeable of potential hazards to which they are exposed in performing a task, and...

1.  Safety Instructions 
  4 
 R5976691 CINE VERSUM 70/60 12042004 
 
Protection from ultraviolet radiation 
WARNING: DO NOT LOOK DIRECTLY IN THE HIGH INTENSITY LIGHT BEAM. The lamp contained in this product is an intense 
source of light and heat. One component of the light emitted from the lamp is ultraviolet light. 
 
 
 
 
 
  

2.  Overview of User’s Controls 
  R5976691 CINE VERSUM 70/60 12042004 
 5 
 
2.  OVERVIEW OF USER’S CONTROLS 
Overview 
• Projector 
• Remote Control 
• Remote Control Operation 
2.1 Projector 
Top view 
The top side of the projector is provided with the following controls: 
1
2
3
4
 Image 2-1 
Projector controls 
Controls function description 
Ref. Function Description 
1  Infrared receiver  Infrared reception diode for the IR signals from the IR transmitter. 
Allows switching On/Off (Standby) of the...

2.  Overview of User’s Controls 
  6 
 R5976691 CINE VERSUM 70/60 12042004 
 
 Image 2-2 
Remote control 
Ref. Function Description 
1    Remote control  operation indication  Lights up when a button on the remote control is pressed (Visual indica-
tion of remote control operation – Battery check). 
2    F1-5 buttons  Activate PIP functions. See “Picture in Picture” on page 21. 
3    ADJ (Adjust button)  Toggle button to enter or exit the adjustment mode. 
4    System setting  Service function only. 
5...

2.  Overview of User’s Controls 
  R5976691 CINE VERSUM 70/60 12042004 
 7 
 
2.3  Remote Control Operation 
Overview 
• General 
• Battery Insertion in the Remote Control 
2.3.1 General 
How to use 
This remote control includes a battery powered infrared transmitter which allows the user to control the projector remotely via its own 
built-in infrared receiver. 
When operating the remote control unit, point it at any of the remote sensors, located on the front, front top, and rear of the projector. 
The...

2.  Overview of User’s Controls 
  8 
 R5976691 CINE VERSUM 70/60 12042004 
 
2.3.2  Battery Insertion in the Remote Control 
Where to find the batteries 
The batteries are not placed in the remote control to avoid remote control operation in its package, resulting in a shorter battery life 
time. 
How to install the batteries 
1.  Push the cover tab (A) with the fingernail a little backwards and pull upwards the cover top (B). (Image 2-4) 
2.  Lift the cover forwards to remove (image 2-5). 
3.  Push the...