Barco Projector Cineversum 60 User Manual

							6.  Image Control 
  R5976691 CINE VERSUM 70/60 12042004 
 19 
 
  
  
Image 6-7 Image 6-8 
6.5 Tint Control 
How to adjust the Tint (hue) 
The Tint function is used to adjust color hue to obtain true color reproduction and is only active for Video and S-Video when using the 
NTSC 4.43 or NTSC 3.58 color system. 
To adjust Tint, press the (-) or (+) side of the ’TINT’ button (image 6-9). The following barscale is overlayed on the source image 
(image 6-10). 
Press the (+) or (-) button until an optimal display is obtained. It is best to adjust tint while displaying an image with natural flesh tones. 
   
Image 6-9 Image 6-10 
6.6  Aspect Ratio Control 
How to adjust the Aspect Ratio 
This function allows you to modify or customize the image display mode to enhance the input image. 
1. Press * on the remote control (image 6-11) to open the Aspect ratio menu. 
 
The Aspect ratio menu appears on the screen including all available aspect ratios (image 6-12).  
						

							6.  Image Control 
  20 
 R5976691 CINE VERSUM 70/60 12042004 
 Explanation 
Aspect Ratio Description 
16:9  Wide screen television format/Anamorphic format. 
4:3  Standard television format (no effect in 1080i digital TV). 
5:4  Workstations format (no effect in 1080i digital TV). 
2.35:1  Panavision or Cinemascope format, frequently used by Hollywood films. 
1.78:1  Wide screen television format/Anamorphic format. 
Letterbox  Forces the letter format of the input signal into the native panel resolution. 
 
2.  Press * to scroll through the available options. 
3. Press ENTER to confirm your selection. 
 
Image of the input signal is displayed in the selected format. 
 
 
Image 6-11 Image 6-12  
 Image 6-13 A Letterbox format input signal 
B Conversion to native panel resolution 
 
 
 
  
						

							7.  Picture In Picture 
  R5976691 CINE VERSUM 70/60 12042004 
 21 
 
7.  PICTURE IN PICTURE 
Overview 
• Brief Introduction 
• Turning PIP On/Off 
• Selecting the PIP Source 
• Configuring the PIP Window 
• Remote Control PIP Configuration 
7.1 Brief Introduction 
If PIP is enabled, a window is inserted in the active image, in which the image of another selected input source will be displayed. The 
position and the size of the window are adjustable.  
 PIP (Picture In Picture) mode allows you to view a small video window in a full-screen video display. For example, 
while displaying output from your PC you could have a small window displaying your video source. 
7.2  Turning On/Off PIP 
How to turn On/Off PIP 
1. Press ADJ to open the Main menu.  
 
The Main menu appears on the screen (image 7-1). 
2. Press ↑ or ↓ to select Advanced settings and press ENTER. 
 
The Advanced settings menu appears on the screen (image 7-2). 
3. Press ↑ or ↓ to select PIP configuration and press ENTER. 
 
The PIP configuration menu appears on the screen (image 7-3). 
4. Press ↑ or ↓ to select PIP. 
5. Press ENTER to turn PIP on or off. 
Main Menu
Image settings
Advanced settings
Installation
Service
*1.PC
2. RGB/Component
3. DVI
4. SVideo
5. Video
6. Component
Shut down
Back
 
Image 7-1 
Advanced settings
Aspect Ratio
Position
PIP configuration
Blanking
Back Input Balance
 
Image 7-2 
PIP configuration
PipOn
Horizontal shift
Vertical shift
Window size
Back PIP source Video
 
Image 7-3  
						

							7.  Picture In Picture 
  22 
 R5976691 CINE VERSUM 70/60 12042004 
 
7.3  Selecting the PIP Source 
The main screen and PIP screen are automatically selected from connected devices.  
The main screen 
When a PC is present on connectors 1 (PC) or 3 (DVI) on the projector, it displays by default as the main (full-screen) picture. The de-
vice on connector 3 (DVI) only displays when no device is present on connector 1 (PC).  
The PIP screen 
When a video device is present on connectors 4 (SVideo) or 5 (Video) on the projector, it displays by default as the PIP picture. The 
device on connector 5 (Video) only displays when no device is present on connector 4 (SVideo).  
3
45
1
PIP
source (1)
Main
source (1)
Main
source (2) PIP
source (2)
Main Menu
Image settings
Advanced settings
Installation
Service
1. PC
2. RGB/Component
3. DVI
4. SVideo
*5. Video
6. Component
Shut down
Back
PC INPUT
 Image 7-4 
Main screen and PIP screen source 
7.4 Configuring the PIP Window  
How to adjust the horizontal position 
1.  Select the PIP configuration menu. (Turning On/Off PIP, page 21.) 
2. Press ↑ or ↓ to select Horizontal shift and press ENTER. 
3. Press ← or → to move the PIP window horizontally on the main screen (image 7-5). 
 
Image 7-5 
  
						

							7.  Picture In Picture 
  R5976691 CINE VERSUM 70/60 12042004 
 23 
 
How to adjust the vertical position 
1.  Select the PIP configuration menu. (Turning On/Off PIP, page 21.) 
2. Press ↑ or ↓ to select Vertical shift and press ENTER. 
3. Press ← or → to move the PIP window vertically on the main screen (image 7-6). 
 Image 7-6 
How to adjust the window size 
1.  Select the PIP configuration menu. (Turning On/Off PIP, page 21.) 
2. Press ↑ or ↓ to select Window size and press ENTER. 
3. Press ← or → to increase/decrease the size of the PIP window (image 7-7). 
 Image 7-7 
7.5  Remote Control PIP Configuration 
Dedicated buttons on the remote control allow you to quickly configure the PIP window (image 7-8). 
Button Description 
F1  Move PIP window to upper-left corner of screen 
F2  Move PIP window to bottom-left corner of screen 
F3  Switch PIP source and main source 
F4  Move PIP window to bottom-right corner of screen 
F5  Move PIP window to upper-right corner of screen 
Table 7-1 
 Image 7-8  
						

							7.  Picture In Picture 
  24 
 R5976691 CINE VERSUM 70/60 12042004