Barco MD-4221 Medical LCD Monitor User Manual

  
 
  11 
FCC Information 
This equipment has been tested and found to comply with the limits of a Class B digital 
device, pursuant to Part 15 of the FCC Rules. 
These limits are designed to provide reasonable protection against interference. This 
monitor can radiate radio frequency energy and, if not installed and used in accordance 
with the instructions, it may interfere with other radio communications equipment. There 
is no guarantee that interference will not occur in a particular installation....

  
 
12  
RF Emissions 
CISPR 11 Class B 
Harmonic emissions 
IEC 61000-3-2 D 
Voltage fluctuations 
IEC 61000-3-3 Complies including domestic 
establishments and those 
directly connected to the 
public low-voltage power 
supply network that 
supplies buildings used for 
domestic purposes 
2. Guidance and manufacturers declaration - electromagnetic immunity 
The MD-4221 is intended for use in the electromagnetic environment specified below. 
The customer or the user of the MD-4221 should assure that it...

  
 
  13 
Electromagnetic compatibility 
Warning 
When this device is connected with other electrical equipment, leakage 
currents may be additive. To minimize total leakage current per patient, 
ensure that all systems are installed according to the requirements of IEC 
60601-1-1. 
Caution 
Portable and mobile RF communications equipment may affect the normal function of 
the display. Do not use cables or accessories other than those provided with the display, 
as this may result in increased...

  
 
14  
Recommendations for using your display system 
1. Optimize the lifetime of your display 
Enabling the Display Power Management System (DPMS) of your display (in the display’s 
Settings menu) will optimize LCD backlight lifetime by automatically switching off the 
backlight when the display is not used for a specified period of time. By default, DPMS is 
enabled on your display, but it also needs to be activated on your workstation. To do this, 
go to “Power Options Properties” in the “Control...

  
 
  15 
• Do not apply pressure to the screen or touch the screen with bare fingers or 
objects. Pressure can affect image quality. Cosmetics and oils on the skin are 
both detrimental to the screen and difficult to remove. 
• Allow the display to warm up to room temperature before turning it on. Avoid 
sudden temperature changes in the environment, as this may cause 
condensation, which damages the display. 
• Do not set up the display near strong light or heat sources. 
• Do not block the vents on...

  
 
16  
 Serial Number. 
 Top-Bottom. 
 Fragile. 
 Do not get wet. 
 Maximum Stacking. 
 Indicates proof of conformity to applicable European Economic 
Community Council directives and to harmonized standards 
published in the official journal of the European Communities. 
 Medical Equipment is in accordance with UL 60601-1 and 
CAN/CSA C22.2 No.601.1 in regards to electric shock, fire hazards, 
and mechanical hazards. 
 Tested to comply with FCC Class B standards. 
 This symbol indicates that the...

  
 
  17 
Introduction 
Quick Startup 
1. Connect the power supply to the display via the power plug. 
2. Plug into the AC inlet with power cord cable. 
3. Connect the video source to this monitor. 
4. Apply power to the peripheral device. 
5. Turn on the switch of this monitor.   
Package Overview 
The package contains the 42-inch display and the following accessories: 
 
 
User manual  
 
User Manual (CD) 
 
DVI cable  
VGA cable 
 
 
AC power cord 
(220V) 
  
 
AC power cord 
(110V) 
 
Remote control   

  
 
18  
Connectors 
  

  
 
  19 
  

  
 
20  
Mechanical product drawing