Bang & Olufsen Beovision 8-40 Television User Manual

							Installation and setting up 
POWER LINK (SUB) 
Use for connection of a Bang & Olufsen  subwoofer. 
POWER LINK (FRONT – REAR) 
Use for connection of external loudspeakers in a  surround sound setup. See the Guide for further information. 
AV (4) 
21-pin sockets for connection of additional video  equipment, such as a DVD player, set-top box, a decoder or video recorder. 
MASTER LINK  For a compatible Bang & Olufsen audio or video 
system. 
RF OUT 
Aerial output socket for distribution of video  signals to other rooms. Also requires an RF Link 
Amplifier. See the Guide for further information.  USB 
For service use only. 
DVB-T/C*
1 
Aerial input socket for an external aerial/cable T V  network. 
DVB-S*
1 
Aerial input socket for a digital satellite signal. 
SMARTC ARD  For a card/module for access to encrypted digital 
channels. For further information about the 
SMARTCARD, see page 19 or the Guide.
1*DVB The number and types of DVB sockets depend on which optional DVB module is installed in the television. 
21  
						

							
First-time setup of your television 
Connections Select the type of equipment connected to each socket, the sockets used, 
the product name, and the source name. 
Information 
This first-time setup procedure is activated when the TV is connected to the mains 
and switched on for the first time. If you want to change your setup at a later date, 
you can access the same menus and update your settings. 
Switch on the TV 
Select settings 
You are led through the following settings only  when you switch on the T V for the first time.*1 
However, the sequence of menus depend on the  connections and settings you make. 
It takes the T V approx. 20 seconds to start up and 
become ready for use.  Switch on  
Select setting 
Accept and go to next menu item 
Set the on-screen menu language Disable or enable internal T V tuner or DVB 
Register connected equipment 
Tune in T V channels automatically. Available only if the T V tuner is  enabled. See the Guide for further information. 
1*NOTE! When you have selected the preferred 
settings in a menu, you may have to press the 
green button to continue to the next menu in the 
first-time setup procedure. Follow the on-screen  instructions. 
or
This Getting Started describes operation with Beo4 in MODE1 and the BEO4 SET TING menu set to  NAVIGATION BUT TON, see also page 8.
Please remember to set your Beo4 with navigation button to the MODE corresponding to the setting  you make in the BEO4 SET TING menu, see the Beo4 Guide for further information.
T V 
MENU L ANGUAGE 
TUNER SETUP CONNECTIONS
AUTO TUNING 
22  
						

							Installation and setting up 
Calibrate the speakers 
Set up the speakers to optimise sound from your listening position.  First-time setup of loudspeakers applies only to speakers for T V viewing. 
See the Guide for further information. 
Adjust  volume,  bass,  treble  and  loudness  and  preset  two  default  speaker 
combinations. Select a different speaker combination at any time.  
*NOTE! Depending on which software version is installed in your television, you may have to 
activate the optional system module during  
first-time setup. The module can also be activated  later. See the Guide for further information.
SPEAKER T YPE 
SPEAKER DISTANCE 
SPEAKER LEVEL 
ADJUSTMENT 
23  
						

							This product is in conformity with the provisions of the Directives 
2004/108/EC and 2006/95/EC. 
This product incorporates copyright protection  technology that is protected by U.S. patents and other intellectual property rights. Use of this copy -
right protection technology must be authorized by 
Rovi, and is intended for home and other limited  viewing uses only unless otherwise authorized by 
Rovi. Reverse engineering or disassembly is  prohibited. 
HDMI, the HDMI logo and High-Definition Multi -
media Interface are trademarks or registered 
trade  
marks of HDMI Licensing LLC. Manufactured under license from Dolby 
Laboratories. Dolby, Pro Logic, and the 
double-D symbol are registered trademarks of  Dolby Laboratories. 
Confidential unpublished works. 
Copyright 1992–2003 Dolby Laboratories.  All rights reserved. 
Manufactured under 
license under U.S. Patent #’s: 5,451,942; 
5,956,674; 5,974,380; 5,978,762; 6,487,535;  7,003,467; 7,212,872 & other U.S. and worldwide patents issued & pending. 
DTS, DTS Digital Surround, ES, and Neo:6 are 
registered trademarks and the DTS logos, and  Symbol are trademarks of DTS, Inc.  © 1996 -2008 DTS, Inc. All Rights Reserved. 
24  
						

							Electrical and electronic equipment, parts and batteries marked with this symbol must not be disposed of with normal household wastage; all 
electrical and electronic equipment, parts and  batteries must be collected and disposed of 
separately. 
When disposing of electrical and electronic  equipment and batteries by use of the collection 
systems available in your country, you protect the  environment, human health and contribute to the prudent and rational use of natural resources. 
Collecting electrical and electronic equipment,  batteries and waste prevents the potential  contamination of nature with the hazardous 
substances which may be present in electrical and  electronic products and equipment.
Your Bang & Olufsen retailer will advise you of the  correct way of disposal in your country. 
If a product is too small to be marked with the  symbol, it will appear in the User guide, on the 
Guarantee certificate, or on the packaging. 
Waste Electrical and Electronic Equipment 
(WEEE) – Environmental protection 
All Bang & Olufsen products comply with applicable environmental legislation throughout 
the world. 
25