Bang & Olufsen Beovision 8-40 Television User Manual

Daily use
Beo5 operation
Press Select  Select channel  Select previous channel 
Press  Hold for 
channel list  Select page
Select 
channel  Accept 
Adjust  volume 
up or down  Press in the middle to mute 
sound Press to bring sound back  Press 
Press  Select 
Activate numbers and 
select channel  Previous 
channel
or
Hold for channel list and  select page or channel  Accept 
Adjust volume. To mute,  turn quickly counter-clockwise  Turn either way to 
bring back sound 
T VT V
or0 –9 0 –9  Previous 0 
or...

Look up teletext 
Operate teletext through the menu bar at the top of the 
teletext page or the arrow buttons on your remote control. Beo4 operation
Activate teletext to use these functions Start teletext 
Move to page 
Stop subpages from turning 
Enlarge teletext page
MEMO pages 
Exit teletext 
Useful hints 
MEMO pages Dual screen REVEAL For quick access, store a teletext page as a MEMO page. See the Guide for further information. 
When teletext is activated, pressing TEX T swaps between dual screen and...

Daily use
Press repeatedly to change screen mode Select page 
Move to PAGE and step  Go to index pages (100, 
200, 300 …) 
Stop turning  Move to HALT Select subpage Restart 
turning 
Move to L ARGE  Press to switch between upper and lower half of page 
and normal viewing  Press repeatedly to change screen mode 
Select page 
Move to PAGE and step 
Stop turning  Select subpage 
Move to  L ARGE  Switch between upper and lower 
half and normal viewing 
Switch  between 
MEMO pages 
Press 
Press  Press 
Press...

Watch television via the DVB module 
Useful hints 
DVB Guide1*Activate DVB module  For more extensive and updated information, please look up the DVB Guide on www.bang-olufsen.com/guides. 
If the T V tuner is deactivated, use the T V button to switch on the DVB module. See the Guide for further information. 
When your television is equipped with the DVB module, 
you can receive digital terrestrial, cable and satellite  programmes depending on your module options. Beo4 operation
Switch on the TV and the...

Daily use
Select Select channel 
or
Press Press
Activate the desired function
Step between groups  Hold for channel list Select page 
Select channelAccept 
Press  Press 
Select  Activate numbers and select 
channel 
Use the designated buttons in the display
Step between groups 
Hold for channel list, select page or  channel  Accept 
Press 
Beo5 operation
2*NOTE! Press MENU twice to bring up the T V 
SETUP menu.
0 –9  
DT V
MENU0 –9  
DT V
0 –9 
Menu
Groups+Groups-
+
15
or or
or  

1*LIST menu2*Optimise 3*Move picture up or down4*VariationIn order to display SOUND and FORMAT on Beo4, you must first add it to the Beo4 list of functions. 
The picture format is optimised, if you press the centre button on Beo4. On Beo5, press Optimise .
The picture can only be moved up or down in FORMAT 1 and 2. In FORMAT 1, you can select variations of the format. On Beo5, press Variation . 
Sound type and picture format 
While you watch  T V through  the T V tuner,  you can switch  between...

Installation and setting up 
18 Set up your television 
20  Connection panels 
  22  First-time setup of your television 
Contents – Installation and setting up 17  

Set up your television 
Important 
Ventilation
Follow the guidelines for placement and connection described on this and the 
following pages. 
Placement options 
Place  the  T V  on  a  firm  and  stable  surface.  The 
standard  placement  allows  you  to  tilt  the  T V,  for 
example  to  facilitate  viewing  at  a  low  placement. 
To  tilt  the  T V  pull  at  the  bottom  of  the  T V. 
To ensure proper ventilation, allow enough space around the screen. Do not cover the fans. At over -
heating...

Installation and setting up 
Cleaning 
For safety reasons the mains supply cable must be 
fastened to the cable strip (A). All cables must be 
fastened to the cable strip (B). However, if your  setup includes a VGA connection, do not run the 
VGA cable through the cable strip (B). Instead, use  the two screws in the VGA plug to fasten it to the  socket.  If you are going to connect any other equipment 
to the T V, do not connect it to the mains yet! 
Run cables
Maintenance 
Screen and cabinet 
Never...

Connection panels 
Any equipment you connect to the main connection panel must be registered in the CONNECTIONS menu.  
Useful hints 
~ – Mains supply  Connection to the mains supply. 
HDMI IN (A– B, and C on some models)  For High Definition Multimedia Interface video 
source or PC. The sources can be registered to any  of the AV socket groups. To expand the number 
of HDMI sockets, connect an HDMI Expander to 
the HDMI C socket, when available, otherwise to 
the HDMI B socket. 
SPDIF (1–2)  Digital...