Bang & Olufsen Beovision 7 40 55 Television User Manual

Cable
network
POWER LINK 1
SUB
PO WE R 
LINK  
2– 6
ATS\f
ANALOGUE
ANALOGUE
HD\bI IN (A–D)
AV  (1–6)Digital cable/
HDTV box
A
TSC
TV signal Analog\fe
TV signal
AV
 2
AV  1
Digital TV
[DTV2]
PVR Box
[V \fMEM]
AV  5MA\bTER LINKVGABeoMaster
[PC]
AV 6Camera
[CAMERA]
11
Connections 
The connection panel on your 
television allows you to connect signal input cables as well as a 
variety of extra equipment, such  as a video recorder or a linked Bang & Olufsen music system. 
Any equipment you connect to  these...

PROJECTOR OUT
PUC 1+2
IR-INCINEMA CONTROL
Home
Automation system
ML
12
>> Connections 
Audio system  If you have a Bang & Olufsen audio system 
with a Master Link socket, you can connect  it to your tele   vision. Use a Master Link cable, 
and connect it to the Master Link socket on 
the main connection panel. See Getting 
Started for further information. 
Home cinema setup with a projector  and a home automation system 
Use a projector or connect a home  automation system to the T V so you can  control...

STB
STBPLUG
IR
13
In the AV menus you can select how a PUC controlled product is connected. 
You can choose between PLUG (cable)  and IR (IR Blaster). If you select PLUG, you must choose between 
MODUL ATION ON and MODUL ATION 
OFF. For information about type of cable  and modulation settings, contact your retailer.  IR-transmitters: To operate non-Bang & 
Olufsen products with a Bang & Olufsen  remote control, attach a Bang & Olufsen IR-
transmitter to each of the products. Connect  each transmitter to...

14
Connect and use a PC 
IMPORTANT! Before connecting a PC to  the television, disconnect the television, 
the computer, and all equipment  connected to the computer from the 
mains. 
To connect a computer to the  television …
>  Using the appropriate type of cable, 
connect one end to the DVI, VGA or HDMI output socket on your computer, and the 
other end to the VGA or HDMI socket on 
the television. 
>  To hear sound from the computer in the 
speakers connected to the television, use 
the appropriate...

15
Register additional video equipment 
If you connect additional video equipment to your television, 
you must register the equipment  in the CONNECTIONS menu. 
When the television is first set  up, some of the equipment connected at that particular 
moment is detected by the 
television. The CONNECTIONS  menu appears automatically on 
the screen during first-time  setup for you to register  connected equipment, if it is not detected automatically by the 
television. If you connect  equipment at a later...

16
>> Register additional video equipment
What ’s on the AV1 – AV6 menus … 
SOURCE … Select the source you have  connected. The option you select indicates 
which remote control button switches on 
the source. For example, a source  registered as V.MEM is switched on when 
you press the V.MEM button. A source  registered as DT V2 is switched on when 
you press DT V2 . (Beo4: Press LIST and 
then the navigation button up or down to  display DT V2 and press the centre 
button). Options are: 
  NONE … if...

17
Standby options …
When you register a non-Bang & Olufsen 
product in the CONNECTIONS menu, you 
can also select different STANDBY OPTIONS 
for your product. This means that you can 
select if the connected product should 
switch to standby automatically. 
The options are: 
OFF AT SOURCE CHANGE … The product switches to standby immediately when 
you select another source. 
OFF AT T V STANDBY … The product  switches to standby when you switch the 
television to standby. 
ALWAYS ON … The television does...

18
Scan in TV channels 
Register the source of your T V 
signal and scan in your T V  channels. 
If you have a connected cable  box to your television, you must 
identify the cable box and select 
an output channel. 
If you have selected T V TUNER in the 
TUNER SETUP menu, you can enter the  source of your T V video signals. 
To scan in T V channels…  >  Bring up the T V SETUP menu and highlight 
OPTIONS. 
>  Press the centre button to bring up the 
OPTIONS menu and highlight TUNER 
SETUP. 
>  Press the...

19
If you have connected a cable box to the 
television, you must register the  connection in the C ABLE BOX SETUP 
menu. 
>  Use the navigation button up or down to 
highlight the name of your cable box. 
>  Press the centre button to store the 
setting. You can then enter the output channel for the cable box. 
When you connect an RF cable box,  remember to leave it switched on at all times. When you have registered the specific 
cable box, enter the output channel for 
the type of cable box and test...

20
Edit scanned TV channels 
You can ‘remove’ channels you do not use from the channel list.
Channels you ‘remove’ are  skipped over when you step 
through channels using the  arrow buttons on the remote control. You can still select them 
in the channel list by pressing the  channel number. 
In addition, you can give  channels names of your own 
choice, re-scan to find new 
channels or fine-tune existing 
channels. 
At any time, you can remove channels 
you do not use. If you wish, you can restore...