B&Q Shredder Performance Power 1600 W 2000 W 8217 3042 02 Instructions Manual

DEUTSCHD
Performance Power 
1600 W / 2000 W
8217-3042-02INSTRUCTIONS FOR USE 

Read these 
instructions for 
use carefully.War ning - 
rotating blades!Remove the 
plug from the 
wall socket 
before carry-
ing out any 
kind of mainte-
nance.The blades will 
continue to 
rotate after the 
machine has 
been switched 
off.Wear safety 
gloves, safety 
goggles and 
hearing protec-
tion.
STOP
EC declaration of 
conformity
ProductElectric compost shredder
modelPerformance Power 1600 W
Performance Power 2000 W
Ty p eK801
Article No.17-2411, 17-2421
Serial No.See machine
Measured sound power...

3
SVENSKAS
3.
4. 2.
1.
4.
5. 

4
SVENSKA S
7.
9.
6.8.
10. 

5
SVENSKAS
14.
4. 13.
4.
15.
12.11. 

6
ENGLISHGB
SAFETY PRECAUTIONS
This symbol means WARNING. Failure to 
follow the instructions carefully may lead to 
injury or damage.
GENERAL
• Study the warning stickers on the machine. Re-
place any damaged or illegible warning stickers.
• Read the instructions carefully. Find out what the 
controls do and learn how to use the machine 
correctly.
• Never use the machine if there are people, espe-
cially children, or animals nearby. Never let a 
child or adult use the machine if they are not fa-
miliar...

7
ENGLISHGB
ASSEMBLY
LEGS
1. Turn the motor housing upside-down. Insert the 
screws into the machine from the bottom (fig. 1).
2. The right and left legs differ. Check that the legs 
are attached so that they are angled outwards 
(fig. 2).
3. Fix the legs to the machine using washers and 
nuts (fig. 3). Do not tighten the nuts yet.
4. The axle components are assembled for packing 
and transportation. Loosen the nuts, wheel 
bushings and two washers on each side. Insert 
the axle between the legs (fig....

8
ENGLISHGB
The motor can be restarted after leaving it to cool 
for about 5 minutes.
Do not start the motor, set the switch to 0, unplug 
the machine and remove the feed funnel. Clean 
around the blade disc (fig. 13). 
Replace the feed funnel and restart. NOTE! A safe-
ty switch in the motor housing prevents the motor 
from starting if the feed funnel is not fitted
correctly.
STOPPING THE MOTOR
Stop the motor by pressing the toggle switch to set-
ting 0 (fig. 12).
Do not feed in any material after the...

9
ENGLISHGB
MAINTENANCE
Always unplug the machine from the 
electrical supply before carrying out ad-
justment or maintenance.
REPLACING THE BLADES
The blades of the shredder have two cutting edges, 
so they can be reversed.
When both edges are worn the blades must be re-
placed. Always replace with genuine replacement 
blades.
Replace the blades as follows:
1. Switch off the motor and unplug the shredder. 
Wait until the blades have stopped.
2. Loosen the locking knob and remove the fun-
nel.
Always...

Fig. Quantity Part No. Description1
2
4
5
6
10
12
14
15
17
18
19
20
23
24
25
26
27
28
29
29
30
31
32
36
37
38
39
40
41
42
43
48
49
50
51
52
591
1
8
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
4
1
1
1
4
1
1
1
1
1
1
1
1
2
1
1
1
1
4
41717-0292-22
1717-0296-01
9838-9520-12
1717-0293-22
1717-0297-01
9852-8013-16
1717-0294-22
1717-0303-01
1717-0318-01
1111-3023-01
9988-3583-12
1134-2808-01
9675-0025-02
1717-0302-03
1717-0295-01
9939-0816-16
9747-0831-02
1717-0095-01
9832-9120-16
9500-4000-00
9500-4100-00
9400-0256-00...