AT&T Z222 User Guide

•   Select Shortcut keys to assign a navigation key as a shortcut for a function, 
such as the calendar  .
•    Select Own phone number to display your phone number in idle mode to 
remind you which SIM card you are using .
•    Select TTY setting to enable the TTY function . Please refer to Accessibility > 
Teletype (TTY) Mode in this user manual .
•     Select  T-coil setting to enable you to hear the phone audio through a hearing 
aid with a telecoil . Please refer to Accessibility > Hearing Aid...

Answer Mode
Flip Open
This function allows you to answer an incoming call by directly opening the flip, but 
without pressing the Send Key or OK Key .
Any Key
This function allows you to answer an incoming call by pressing any key on the 
keypad .
Security Settings
Phone Password
A password can protect your phone and help avoid illegal use . If your phone is 
password protected, you will have to enter the correct password when the phone 
is turned on .
•     For a new phone, the protection function is...

Fixed Dial Numbers
If you enable fixed dial numbers, you cannot dial phone numbers that are not in 
the Fixed Dial Numbers (FDN) list .
FDN List
The FDN list allows you to create a list of fixed dial numbers .
38 Settings
Accessibility
Teletype (TTY) Mode
Your handset is a TTY-compatible device . Simply connect the TTY equipment to 
the headset jack . 
1    From idle mode, select Menu > Settings > Phone > TTY setting .
2     Select one of the following options and press the OK Key for Select .
  •...

Care and Maintenance
General Care
Your handset contains delicate electronic circuitry, magnets, and battery systems . 
You should treat it with care and give particular attention to the following points:
•   Do not allow the handset, battery, or accessories to come into contact with 
liquids or moisture at any time . Do not immerse the handset in any liquid .
•    Do not place the handset alongside computer disks, credit cards, travel cards, 
and other magnetic media . The information contained on disks...

•    
Use a damp or anti-static cloth to clean the handset  . Do not use an ordinary dry 
cloth or electrostatic cloth . Do not use chemical or abrasive cleaners as these 
could damage the casing .
•    Third-party equipment: The use of third-party equipment, cables, or 
accessories, not made or authorized by the manufacturer, may invalidate the 
warranty of your handset and also adversely affect the phone’s safety/operation .
•    Remember to make backup copies of all important data on your handset  .
•...

•   Replace the battery only with another battery that has been qualified with the 
system per this standard, IEEE-Std-1725-2006  . Use of an unqualified battery 
may present a risk of fire, explosion, leakage, or other hazard . 
•    Promptly dispose of used batteries in accordance with local regulations . 
•    Battery usage by children should be supervised . 
•    Avoid dropping the phone or battery  . If the device or battery is dropped, 
especially on a hard surface, and the user suspects damage,...

 Third-Party Equipment
The use of third-party equipment, cables, or accessories not made or authorized 
by the manufacturer, may invalidate the warranty of your handset and also 
adversely affect the handset’s operation . For example, use only the manufacturer 
mains cable supplied with the AC charger .
Declaration of Conformity
We declare under our sole responsibility that the product(s) detailed in 
this manual, and in combination with our accessories, conform to the 
essential requirements of European...

Turn on the HAC Setting
When the HAC setting is on, your phone sends the audio from your phone calls 
to the telecoil rather than to the microphone of your hearing aid . You are likely 
to hear calls much better because volume is increased and background noise 
and feedback are diminished . The HAC setting improves only the calls you listen 
to through the earpiece . It does not affect calls heard on the speakerphone or a 
headset . It’s better to turn off the Bluetooth function when the HAC setting is...

Problem Possible Causes Possible Solution
Battery will 
not charge The battery or battery charger is 
damaged . Contact the dealer
 .
The phone’s temperature is below 
14°F (-10°C) or above 122°F (50°C) . Adjust the battery charging 
environment to avoid temperature 
extremes .
Poor contact between the battery 
and charger  . Check all connectors to make sure 
all connections have been properly 
made .
Shortened 
standby 
time The standby time is related to 
your service provider system 
configuration ....

Specifications
Handset specifications are shown in the following table .
Handset StandardsWCDMA 850MHz,1900MHz HSDPA
GSM 850MHz, 900MHz, 1800MHz, and 1900MHz
Dimensions (H × W × D) 3 .76" (H) x 1 . 92" (W) x 0  .73" (D)
Weight 3 .24 oz .
Display 2 .0" TFT color screen
Camera 0 .3 megapixel camera
Extended memory N/A
Battery  900 mAh, Lithium ion (Li-ION)
Performance  BMP/JPG/GIF image; 3GP/MP4 video; MP3/
AMR/WAV/ACC/ACC+ audio; USB 1 . 1; JAVA MIDP 
2 . 0; MMS Video and Picture, Email,...