AT&T Vireless Lg Af300 User Manual

5
Install the Back-up Battery
Remove the cover from the battery compartment.
Insert the back-up battery and replace the cover.
Notes:
•	The battery is intended for backup purposes only and may 
take approximately three and a half (3.5) hours to fully charge 
(battery will charge inside the device while connected to a 
power supply).
•	Charge time may be impacted by environmental factors and 
the battery will stop charging when the ambient temperature 
is outside of the temperature range allowed for...

6
Turn on Your Device
1)  Connect the large end of the power cord into the power 
plug.  Insert the power plug  into an electrical outlet.
2)   Insert the small end of the power cord into the Power Input 
port on the back of your Wireless Home Phone device. 
3)   Slide the On/Off switch to the On position.
Check the Wireless Signal
More green bars indicate a stronger signal. 
Your device can be relocated in your home for best 
performance. 

7
Turn on Your Device
1)  Connect the large end of the power cord into the power 
plug.  Insert the power plug  into an electrical outlet.
2)   Insert the small end of the power cord into the Power Input 
port on the back of your Wireless Home Phone device. 
3)   Slide the On/Off switch to the On position.
Check the Wireless Signal
More green bars indicate a stronger signal. 
Your device can be relocated in your home for best 
performance.
Connect the Device to a Phone
1)  Unplug your phone 
from your...

8
Place a Test Call
Place a test call from your connected home phone. Make 
sure to dial the 10-digit phone number, including area code.
For best results, place the cordless phone base at least 12 
inches from the Wireless Home Phone device.
Note: Keep your cordless phone plugged into a power outlet. 

9
Place a Test Call
Place a test call from your connected home phone. Make 
sure to dial the 10-digit phone number, including area code.
For best results, place the cordless phone base at least 12 
inches from the Wireless Home Phone device.
Note: Keep your cordless phone plugged into a power outlet.
Set up Voicemail and Additional Phones
Voicemail is included with your service. Dial “1” to set up and 
access. If you choose to use an answering machine instead, 
set it to fewer than 4 rings. To place...

10
Voicemail
Your Wireless Home Phone device comes with standard 
wireless voicemail. Follow the steps below to set up and use your 
voicemail.
Setup
Dial 1 on any home phone connected to the Wireless Home 
Phone device and wait four (4) seconds to connect to your AT&T 
wireless voicemail. Simply follow the voice prompts to complete 
setup. To enable remote voicemail retrieval and for added security 
be sure to create a password during setup.
For more help on setting up your AT&T voicemail, go to...

11
Remote Retrieval
To retrieve voicemail messages from a phone not connected to 
the Wireless Home Phone device, dial the number associated 
with your Wireless Home Phone service. When voicemail picks 
up, press *. You will then be prompted to enter your password. 
Simply follow the prompts to listen to and manage your voicemail 
messages.
Transferring a Phone Number
Transferring a landline phone number to your Wireless Home 
Phone device can take about four days.  Outgoing calls can be 
made...

12
Using Your Device
Making Calls
Using a phone connected to your Wireless Home Phone device, 
place and receive calls as you normally would. The Wireless Home 
Phone device supports both cordless and corded phone dialing 
methods.
Note: You will need to dial 10 digits even for local numbers.
Three-Way Calling
While on an existing call, press the Flash (or Phone/Talk) key 
on your phone to put the first party on hold.  When you hear a 
dial tone, dial the second party’s number (wait up to four [4]...

13
Call Waiting
You will hear two tones if someone calls while you are already on a 
call. To hold the current call and accept the waiting call, press the 
Flash (or Phone/Talk) key.  
You can press the Flash (or Phone/Talk) key anytime to switch 
back and forth between calls.
To clear the current call and accept the waiting call, enter 1 and 
press the Flash (or Phone/Talk) key.
To reject the waiting call, enter 0 and press the Flash (or Phone/
Talk) key.
Notes:
•	Your Wireless Home Phone comes with...

14
Call Forwarding
To forward all calls, dial:
1) *21*
2) The 10-digit number to which you wish to forward your calls
3) # key
(Example: *21*1234567890# forwards your calls to the phone 
number 123-456-7890)
Please wait at least three (3) seconds and you hear a confirmation 
tone for the forwarding to complete before hanging up.
To un-forward calls, dial #21#, please wait at least three (3) 
seconds and you hear a confirmation tone for the un-forwarding 
to complete before hanging up.
Note: Applicable...