Home
>
ATT
>
Communications System
>
ATT DEFINITY Communications System Generic 3, Version 4, Issue 3.0 Instructions Manual
ATT DEFINITY Communications System Generic 3, Version 4, Issue 3.0 Instructions Manual
Have a look at the manual ATT DEFINITY Communications System Generic 3, Version 4, Issue 3.0 Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 164 ATT manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
AT&T AT&T 555-230-465ADD Issue 1-1 Comcode 107781197 May 1996 DEFINITY ® Communications System Generic 3 Version 4, Issue 3.0 Change Description Addendum
Copyright © 1996, AT&T All Rights Reserved Printed in U.S.A. NoticeEvery effort was made to ensure that the information in this book was complete and accurate at the time of printing. How- ever, information is subject to change. Your Responsibility for Your System’s Security Toll fraud is the unauthorized use of your telecommunications system by an unauthorized party, for example, persons other than your company’s employees, agents, subcontractors, or persons working on your company’s behalf. Note that there may be a risk of toll fraud associated with your telecommunications system and, if toll fraud occurs, it can result in substantial addi- tional charges for your telecommunications services. You and your system manager are responsible for the security of your system, such as programming and configuring your equipment to prevent unauthorized use. The system manager is also responsible for reading all installation, instruction, and system administration documents provided with this product in order to fully understand the features that can introduce risk of toll fraud and the steps that can be taken to reduce that risk. AT&T does not warrant that this product is immune from or will prevent unauthorized use of common-carrier telecommunica- tion services or facilities accessed through or connected to it. AT&T will not be responsible for any charges that result from such unauthorized use. Federal Communications Commission Statement Part 15: Class A Statement. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter- ference when the equipment is operated in a commercial envi- ronment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accor- dance with the instruction manual, may cause harmful interfer- ence to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. Part 68: Network Registration Number. This equipment is registered with the FCC in accordance with Part 68 of the FCC Rules. It is identified by FCC registration number AS593M- 13283-MF-E. Part 68: Answer-Supervision Signaling. Allowing this equip- ment to be operated in a manner that does not provide proper answer-supervision signaling is in violation of Part 68 rules. This equipment returns answer-supervision signals to the public switched network when: lAnswered by the called stationlAnswered by the attendantlRouted to a recorded announcement that can be administered by the CPE user This equipment returns answer-supervision signals on all DID calls forwarded back to the public switched telephone network. Permissible exceptions are: lA call is unansweredlA busy tone is receivedlA reorder tone is receivedTrademarks DEFINITY is a registered trademark of AT&T in the U.S. and throughout the world. in this document, DEFINITY Communica- tions System Generic 3 is often abbreviated to DEFINITY Generic 3 or Generic 3. Ordering Call: Write: Order: Information AT&T GBCS Publications Fulfillment Center Voice 1 800 457-1235 International Voice 317 361-5353 Fax 1 800 457-1764 International Fax 317 361-5355 AT&T GBCS Publications Fulfillment Center P.O. Box 4100 Crawfordsville, IN 47933 Document No. AT&T 555-230-465ADD Comcode 107781197 Issue 1-1, May 1996 For more information about AT&T documents, refer to the sec- tion entitled, “Related Documents” in “About This Book.” You can be placed on a Standing Order list for this and other GBCS documents you may need. Standing Order will enable you to automatically receive updated versions of individual doc- uments or document sets, billed to account information that you provide. For more information on Standing Orders, or to be put on a list to receive future issues of this document, please con- tact the AT&T GBCS Publications Fulfillment Center. AT&T Corporate Security Whether or not immediate support is required, all toll fraud inci- dents involving AT&T products or services should be reported to AT&T Corporate Security at 1 800 821-8235. In addition to recording the incident, AT&T Corporate Security is available for consultation on security issues, investigation support, referral to law enforcement agencies, and educational programs. AT&T Fraud Intervention If you suspect that you are being victimized by toll fraud and you need technical support or assistance, call GBCS Technical Ser- vice Center Toll Fraud Intervention Hotline at 1 800 643-2353. European Union Declaration of Conformity AT&T Global Business Communications Systems declares that DEFINITY G3si equipment specified in this document conforms to the referenced European Union (EU) Directives and Harmo- nized Standards listed below: EMC Directive89/336/EEC Low Voltage Directive73/23/EEC The “CE” mark affixed to the equipment means that it conforms to the above Directives. Comments To comment on this document, return the comment card at the front of the document. Acknowledgment This document was prepared by the GBCS Product Documen- tation Development group, AT&T Bell Laboratories, Denver, CO 80234-2703. RECYCLED PAPER
CHANGE TO DEFINITY® Communications System Generic 3 Version 4, Issue 3.0 Change Description (AT&T 555-230-465). The following change is made in the HIGHLIGHTS section, on page iv, in the title CallVisor ASAI over the DEFINITY LAN Gateway R1.0 [ASAI-LANG] (G3V4 only), the words G3V4 only should be: pre-G3V4.