Asus Z9200k Service Guide

							                 Disassembly Procedure 
 
                   2 – 1 
Disassembly Procedure 
Please follow the information provided in this section to perform the complete 
disassembly procedure of  the notebook.    Be sure to use proper tools 
described before. 
SUS Z9200K Series Notebook consists of various modules. This chapter describes the 
procedures for the complete notebook disassembly.    In addition, in between procedures, 
the detailed disassembly procedure of individual modules will be provided for your 
service needs. 
The disassembly procedure consists of the following steps: 
 
• Battery Module 
• Memory Module 
• Wireless LAN Module 
• HDD Module 
• ODD Module 
• Keyboard  
• LCD Module 
• Top Case Module 
• Main Board Module 
• Modem Module 
• CPU/Heat Sink Module 
 
 
 
 
 
 
 
 
 
 
CIapter 
2 
A  
						

							                     Disassembly Procedure 
 
                                    2 - 2
Batter y Module 
The illustration below shows how to remove the battery module.   
 
1. Unlock and hold the latches, and remove the battery. 
  
 
2. Slide the battery latch (No.1) to unlock and Firmly slide the other latch (No.2) to the 
top and remove the battery 
 
  
      
              
Memor y Module 
The Z9200K Series Notebook do not have onboard RAM. There are two SO-DIMM 
sockets for installing SO-DIMM RAM. It can upgrade the total memory size up to 2GB 
with a 512MB module on each socket.  
 
Removing Memory module  
1.  Remove 4 screws and remove DIMM door. 
 
         
BATTERY 
SECOND 
MEMORY 
MODULE 
MEMORY 
REMOVAL 
L  
						

							                     Disassembly Procedure 
 
                                    2 - 3
2.  Take the memory DIMM cover away as the picture shows. 
 
 
                   
 
Wireless Lan Module 
The illustration below show show how to remove the Wireless LAN module 
Disassembling Wireless Lan board. 
 
1.  Remove 2 Antenna cables from Wireless LAN Module. 
 

              














 





 











 





 





 





 


 
 
2.  Take the Wireless Lan away as the picture shows.   
 
   
WIRELESS 
LAN 
REMOVAL 
 
WIRELESS LAN 
MODULE 
REMOVAL 
30
  
						

							                     Disassembly Procedure 
 
                                    2 - 4
HDD Module 
The illustrations below show how to remove the HDD module from the notebook. 
 
Removing HDD Module 
1.  Remove 1 screw and lift the HDD cover away. 
  
      
 





















































  







2.  Pull the hard disk module toward the direction of the arrow and lift it up and take it   
   out. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
HDD 
MODULE 
HDD 
MODULE 
REMOVAL  
						

							                     Disassembly Procedure 
 
                                    2 - 5
ODD Module 
1. Remove 2 screws. 
 
       
       
2. Remove the Mylar. 
 
 
 
3.  Push the metal plate with a screw driver and pull the ODD out. 
 
 
 
 
 
 
 
 
OPTICAL 
DRIVE 
REMOVAL  
						

							                     Disassembly Procedure 
 
                                    2 - 6
CPU Module 
The illustrations below show how to remove the CPU module from the notebook. 
 
Removing CPU 
1. Remove the rubber. 
 
 
 
2.  Remove 4 screws aside the CPU. And take away the thermal module. 
 
       
 
3.  Remove the CPU slot and take away the CPU. 
 
 
 
CPU MODULE 
REMOVAL 
CPU 
REMOVAL 
4 1
2 
3  
						

							                     Disassembly Procedure 
 
                                    2 - 7
LCD Module 
The illustrations below show how to disassemble the LCD module.    The module 
contains LCD panel, Inverter board, LCD Hinge bracket, Hinge cover, LCD front 
cover, LCD back cover 
 
Disassembling LCD Module 
1.  Remove 3 screws on both side. 
 
            
 
2. Remove both hinge covers 
 
   
 
3.  Remove 2 screws on the hames cover and take the hames cover away 
 
    
 
 
 
 
 
LCD 
MODULE 
LCD 
DISASSEMBLY 
  
						

							                     Disassembly Procedure 
 
                                    2 - 8
4.  Remove 1 screw and disconnect the connector.   
 
          
 
5.  Remove 1 screw and disconnect the connector.   
 
     
 
6.  Remove 2 screws on both ends.   
 
     
 
      
						

							                     Disassembly Procedure 
 
                                    2 - 9
7.  Remove the LCD module from system.   
 
     
 
Disassembling LCD Module 
1.  Remove 5 rubber pads and 5 screws(M2.5 x 8L) from LCD module. 
 
 
2.  Prying the inside edges of the bezel, then separate it from LCD back cover and take 
LCD front bezel away. 
 
  
     
 
 
 
 
 
 
 
 
LCD 
DISASSEMBLY 
  
						

							                     Disassembly Procedure 
 
                                    2 - 10
Disassembling inverter board 
3.  Remove 1tape and disconnect 2 cables. 
 
       
 
4.  Take away the inverter board. 
 
 
Disassembling LCD panel 
1.  Remove 10 screws and take away the LCD panel.