Asus Vw266h User Guide

							
2.1	 Detaching	the	arm/stand		
	 (for	 VESA 	 wall 	 mount)
VESA wall mount. 
To detach the arm/stand: 
2. Remove the arm cover
3. Have the front of the monitor face down on a table 
 
4. Detach the arm from the monitor. 
• We  recommend  that  you  cover  the  table  surface  with  soft  cloth  to  prevent damage to the monitor. 
• Hold the stand of the monitor when you remove the screws. 
2-
The  detachable  stand  of  the VK266/VW266  Series  LCD  monitor  is  specially  designed  for 
ASUS LCD Monitor VK266/VW266 Series

.
3 screws
Remove the back cover.
 by hand carefully  
. by hand carefully
. Use a screwdriver to 
carefully
remove the three screws on the stand of the monitor as the below drawing shows.
The VESA wall mount kit (00 mm x 00 mm) is purchased separately.
For use only with UL Listed Wall Mount Bracket with minimum weight/load \
7.
9 Kg

 (Screw size: 4mm x 12 mm) 
 
						

							
2.2	 Adjusting	the	monitor
•  For optimal viewing, we recommend that you look at the full face of the monitor, 
then adjust the monitor to the angle that is most comfortable for you.
•  Hold the stand to prevent the monitor from falling when you change its angle.
•  You can adjust the monitor’s angle from  -5º to 20º.
 
  -5º~20º
2.3 Install Life-Frame 2 software

 
with the webcam,allowing users to create their own photos or video clips\
.
•  LifeFrame 2 only supports Microsoft   Windows   Vista/XP Service Pack 2
operating systems.
The LifeFrame 2 software is bundled in the support CD.  
•
Installation instructions
1. Close all other applications.
2. Insert the support CD into the optical drive and run the LifeFrame 2 \
program.
3. Follow the on-screen instructions to complete the installation.
®  
®  
2-2Chapter 2: Setup
ASUS VK266 series provides the easy-to-use LifeFrame 2 software that can 
work 
 
						

							
3-

3.1	 OSD	 (On-Screen 	 Display) 	 menu 	
3.1.1	 How	 to 	 reconfigure
.   Press the MENU button to activate  
the OSD menu. 
          
 

2.  Press  and  to navigate through the functions. Highlight and activate 
the desired function by pressing the MENU button. If the function select\
ed 
has a sub-menu, press      and        again to navigate through the sub-menu 
functions. Highlight and activate the desired sub-menu function by press\
ing 
the MENU button.  
3.  Press  and  to change the settings of the selected function.
4.  To exit the OSD menu, press the  button. Repeat step 2 and step 3 to 
adjust any other function.   
3.1.2	 OSD 	 Function 	 Introduction
1.	 Spendid
 This function contains five  
sub-functions you can select  
for your preference. Each mode has the 
Reset selection, allowing you to maintain 
your setting or return to the preset mode.
 •  Scenery 	 Mode: best choice for scenery photo display with SPLENDID™   
 Video Enhancement.
 •    Standard 	 Mode: best choice for document editing with SPLENDID™    
 Video Enhancement.
 •    Theater 	 Mode: best choice for movie with SPLENDID™ Video     
 Enhancement.
 •    Game 	 Mode: best choice for game playing with SPLENDID™ Video 
 Enhancement.
 •    Night	 View 	 Mode: best choice for dark-scene game or movie with  
 SPLENDID™ Video Enhancement.  
•  In the Standard Mode, the Satuation and ASCR functions are not user-configurable.
•  In the other modes, the sRGB function is not user-configurable.
ASUS LCD Monitor VK266/VW266 Series
 
						

							
3-2Chapter 3: General Instruction  

2.	 Image	
 You can adjust brightness, contrast, sharpness, saturation,position (VGA\
  
         only), and focus (VGA only) from  this main function. 
P1
  • Brightness: the adjusting range is from 0 to 00.   is a hotkey to    
 activate this function.
 • 
 • Sharpness: the adjusting range is from 0 to 00.
 • Saturation: the adjusting range is from 0 to 00. 
 • Position: adjusts the horizontal postition (H-Position) and the vertical    
 position (V-Position) of the image. The adjusting range is from 0 to 00.   
• Focus: reduces Horizonal-line noise and Vertical-line noise of the image  
 by adjusting (Phase) and (Clock) separately. The adjusting range is from  
 0 to 00.      
• Phase adjusts the phase of the pixel clock signal. With a wrong phase adjustment, the screen shows  horizontal disturbances.
• Clock (pixel frequency) controls the number of pixels scanned by one horizontal sweep. If the frequency is not correct, the screen shows vert\
ical stripes and the image is not proportional.
  
 
3.	 Color		
 Select the image color you like 
 from this function. 
P2
ASCR:Select YES or NO to enable or disable dynamic contrast 
Contrast: the adjusting range is from 0 to 00.
ratio function.
Over Drive:To speed up the respense time by Over drive technology.
the adjusting range is from 0 to 00•
• (for some models)
	  (for some models)
	
 
						

							
3-3

5.	 System
	Setup
	

 Allow you to adjust the system.

 •
 Volume: the adjusting range is from 0 to 
00. 
 is a hotkey to activate 
 

 this function. 

 •
 OSD Setup: adjusts the horizontal postition (H-Position) and 
   

 the vertical position (V-Position) of the OSD. The adjusting range is 
   

 from 0 to 
00. In the OSD Timeout selection, you can adjust the 
   

 OSD timeout from 
0 to 
20.

 •
 Language: there are ten languages for your selection, 
     

 including English, German, Italian, French, Dutch, Spanish, Russian, 
   

 Traditional Chinese, Simplified Chinese, Japanese, and Korean. 

 •
 Aspect Controls: adjusts the aspect ratio to “Full” or “4:3”\
. 

 •
 Information: shows the monitor information. 

 •
 Reset: “Yes” allows you to revert to the preset mode. 

4.	 Input	Select	
 In this function, you can select  VGA,DVI,HDMI, YPbPr input source. 
         (Only for some models)
• Color Temp.: contains five color modes including Cool, Normal,    
 Warm, sRGB, and User mode.      
 •  Skin Tone: contains three color modes including Reddish, Natural,    
 and Yellowish. 
In the User mode, colors of R (Red), G (Green), and B (Bluee) are \
user-configurable; the adjusting range is from 0-00.
ASUS LCD Monitor VK266/VW266 Series
A
 (for some models)
	
 
						

							
3-
4
Chapter 3: General Instruction  

3.2	
Specifications summary 
For VK266/VW266 series models
*Specifications	are	subject	to	change	without	notice.
ModelVK266H
Panel Size25.5W
Max. Resolution 1920x1200
Brightness (Max.)
Intrisinc Contrast Ratio (Max.) ≧1000:1
Viewing Angle (CR=10) ≧160°(V) ; ≧170°(H)
Display Colors 16.7 M(6bit Hi FRC)
Response Time 2ms (Gray to Gray)
Webcam (built-in) 2.0M
Satellite Speaker 3W x 2 stereo
Earphone Output Yes
Sound from HDMI Yes
DVI input DVI with HDCP
D-Sub input Yes
Audio Line-in Yes
RCA 3x2(YPbPr, R/L, SPIDIF) Yes
Power ON Consumption 85W
Tilt +25° ~ -5°
VESA Wall Mounting Yes (100mm x 100mm)
Phys. Dimension (WxHxD) 596x461x240
Box Dimension (WxHxD) 693x528x206
Net Weight (Esti.) 7.9
Gross Weight (Esti.)
11.1

Voltage Rating AC:100~240V(Built-in)
VW266H
25.5W
1920x1200
≧300cd/ ㎡
≧1000:1
≧160°(V) ;  ≧170°(H)
16.7 M(6bit Hi FRC)
2ms (Gray to Gray) -
3W x 2 stereo YesYes
DVI with HDCP Yes
YesYes
85W
+25° ~ -5°
Yes (100mm x 100mm)
596x449x240
693x528x2067.9
11.1

AC:100~240V(Built-in)
≧300cd/ ㎡
HDMI input
YesYes
 
						

							
3-5

3.3   Troubleshooting (FAQ)

ProblemPossible 	 Solution

Power  LED is not ON•  Press the  button to check if the monitor      is in the ON mode. •  Check if the power cord is properly     connected to the monitor and the power    outlet. 
The power LED lights amber and there is no screen image •  Check if the monitor and the computer are    in the ON mode. •  Make sure the signal cable is properly       connected the monitor and the computer. •  Inspect the signal cable and make sure      none of the pins are bent. •  Connect the computer with another     available monitor to check if the computer     is properly working.
Screen image is too light or dark•  Adjust the Contrast and Brightness settings    via OSD.
Screen image is not centered or sized properly•  Press the  button for two seconds to     automatically adjust the image.  •  Adjust the H-Position or V-Position settings    via OSD.
Screen image bounces or a wave pattern is present in the image•  Make sure the signal cable is properly     connected to the monitor and the computer. •  Move electrical devices that may cause       electrical interference.
Screen image has color defects (white does not look white)•  Inspect the signal cable and make sure that     none of the pins are bent.  •  Perform Reset via OSD. •  Adjust the R/G/B color settings or select the     Color Temperature via OSD.
Screen image is blurry or fuzzy•  Press the  button for two seconds to      automatically adjust the image (for VGA    mode only). •  Adjust the Phase and Clock settings via     OSD.
No sound or sound is low•  Ensure that the audio cable is properly       connected to the monitor and the computer •  Adjust the volume settings of both your     monitor and computer.  •  Ensure that the computer sound card driver     is properly installed and activated.
A
A
Webcam is not working•  Make sure that you have connected the     USB 2.0 cable securely to both the LCD                                                                         \
   monitor and your computer.•  Make sure that you use the Microsoft                                                                         \
    Windows   Vista/XP Service Pack 2                                                                         \
    operation systems.   
®  ®  
ASUS LCD Monitor VK266/VW266 Series
 
						

							
3-6Chapter 3: General Instruction  
3.4 VK266/VW 266 PC  Supported Timing List
Mode Input
AspectRatio Resolution H(KHz) V(Hz)Pixel(MHz)
640x480,60Hz
31.469   59.94   25.175
640x480,72Hz 37.861   72.809   31.5
640x480,75Hz 37.5   75 31.5
640x480, 85Hz 43.269   85.008 36
800x600,56Hz 35.156   56.25 36
800x600,60Hz 37.879 60.317 40
800x600,72Hz 48.077 72.188 50
800x600,75Hz 46.875 75 49.5
800x600,85Hz 53.674 85.061 56.25
1024x768,60Hz 48.363 60.004 65
1024x768,70Hz 56.476 70.069 75
1024x768,75Hz 60.023 75.029 78.75
1024x768,85Hz 68.677 84.997 94.5
1152x864,75Hz 67.5   75 108
1280x960,60Hz 60   60   108
1280x1024,60Hz 63.981   60.02 108
1280x1024,75Hz 79.976 75.025 135
1440x900,60Hz 55.935 59.887 106.5
1440x900,75Hz 70.635 79.984 136.75
WSXGA 16:10 1680x1050,60Hz65.29   59.954 146.25
1080P 16: 9 1920x1080, 60Hz67.5   60 148.5
WUXGA 16:10 1920x1200,60Hz 74.038   59.95 154
640x350, 70Hz 31.469 70.087 25.175
640x350,85Hz 37.861 85.08 31.5
720x400, 70Hz 31.469 70.087 28.322
720x400,85Hz 37.927 85.039 35.5
VGA 4: 3 640x480, 67Hz 35 66.667 30.24
SVGA 4: 3 832x624, 75Hz 49.725 74.551 57.2832
Mode ResolutionH(KHz) V(Hz)
Pixel(MHz
)
16: 9
1280x720, 60Hz 44.772 59.855 74.5
16: 9 1280x720, 75Hz 56.456 74.777 95.75
1280x768, 60Hz 47.776 59.87 79.5
1280x768, 75Hz 60.289 74.893 102.25
720P
WXGA+ Mode Input
AspectResolution
VESA Modes, User Available TimingsInput
Aspect H(KHz) V(Hz)
Pixel(MHz
)
DOS
DOS
H(KHz) V(Hz)
Pixel(MHz)MAC Modes, Factory Preset Timings(D-SUB, DVI-D, HDMI inputs) VESA Modes, Factory Preset Timings
VGA 4: 3
IBM Modes, Factory Preset Timings(D-SUB, DVI-D, HDMI inputs)Mode Input
AspectRatio Resolution
XGA 4: 3 SVGA 4: 3
WXGA+ 16:10 SXGA 4: 3
5: 4
16:101280x800, 60Hz 49.702 59.81 83.5
16:10 1280x800, 75Hz 62.795 74.934 106.5
1080P 16: 9 1920x1080, 60Hz 66.587 59.934 138.5
 
						

							
Chapter 3: General Instruction  
*	Modes	not	listed	in	the	above	tables	may	not	be	supported.	For	optimal	resolution,	we	recommend	
that	you	choose	a	mode	listed	in	the	above	tables
3-7
VK266/ VW266 HDMI Supported Primary TimingsHH
720(1440)x480i
59.94/60 Hz
720(1440)x480i
59.94/ 60 Hz
640x480P
59.94 / 60 Hz
720x480P
 59.94 / 60 Hz
720x480P
59.94 / 60 Hz
4:3 1440x576i, 50
15.625 50 27
16:9 1440x576i, 50
15.625 50 27
4:3 720x576P, 50Hz 31.25 50 27
16:9 720x576P, 50Hz 31.25 50 27
16:9 1280x720P,
37.5 50 74.25
1280x720P
59.94 / 60 Hz
1080i 16:9
1920x1080i,
28.125 50 74.25
1920x1080i
59.94/ 60 Hz
1440x480P
 59.94/ 60 Hz
1440x480P
 59.94 / 60 Hz
4:3 1440x576P, 50H z
31.25 50 54
16:9 1440x576P, 50Hz 31.25 50 54
16:9 1920x1080P,
50Hz 56.25 50 148.5
16:9 1920x1080P,
 59.94 /60 Hz 67.433/67.
5
59.94/60 148.352/
148.5
54/54.054
54/54.054
31.469/ 31.5 59.94/60
59.94/60
31.469 /
31.5
59.94 / 60
16:9
480P 576i
576P
720P 16:9 74.176/74.25
16:9 74.176/74.25
59.94/60
33.716/ 33. 75
44.955/45 59.94/60
31.469 /
31.5 59.94 / 60
4:3
25.175/25.2
480P 31.469/31.
5
4:3 27 /27.027
16:9 27 /27.027Pixel(MHz)
27 /27.027
27 /27.027
59.94 / 60
15.734/
15.75 59.94 / 60
Mode
Resolution H(KHz) V(Hz)
16:9
480i 15.734/
15.75
Mode Resolution H(KHz) V(Hz) Pixel(MHz)
Input
Aspect
4:3
576P
1080P
VK266H/VW266H HDMI Supported Optional TimingsInput
Aspect
4:3 31.469/
31.5 59.94/60
720x480i
59.94 Hz
720x480P 60 Hz
720x576i 50 13
.5
 Pixel(MHz)
15.734 59.94 13.5
480P 4:3 31.5 60 27
Mode
Input
Aspect Resolution H(KHz) V(Hz)
VK266H/VW266H YPbPr Input List
480i 4:3
576i 4:3 15.625
50 Hz
720x576P 50Hz
1280x720P 50Hz
1280x720P
59.94/60 Hz 1920x1080i 50Hz
1920x1080i 59.94 Hz
1920x1080P 50 Hz
1920x1080P 59.94/60 Hz
1080P
16:9
56.25 50 74.25
16:9 59.94/60 148.550 74.25
16:9 59.94/60 74.176/74.25
37.5 50 74.25
16:9 44.955/45 59.94/60 74.176/74.25
576P 4:3
31.25 50 27
1080i 16:9
28.125
720P
16:9
33.716/
33.75
67.432/ 67.5