Asus Vw248tlb User Guide

  
VW248TLB Series 
LED Monitor
User Guide
 
October 2010
 

ii
Table of contents
Notices ........................................................................\
.................................iii
Safety information  ........................................................................\
..............iv
Care & Cleaning ........................................................................\
...................v
1.1  Welcome! ........................................................................\
................vi
1.2  Package contents...

iii
Notices
Federal Communications Commission Statement
This	device	complies	with	Part	15	of	the	FCC	Rules.	Operation	is	subject	
to	the	following	two	conditions:
•	 This	device	may	not	cause	harmful	interference,	and
•	 This	device	must	accept	any	interference	received	including	
interference	that	may	cause	undesired	operation.
This	equipment	has	been	tested	and	found	to	comply	with	the	limits	for	a	
Class	B	digital	device,	pursuant	to	Part	15	of	the	FCC	Rules.	These	limits	
are	designed	to	provide...

iv
When	the	monitor	enters	energy	saving	(standby)	mode,	the	screen	will	
display	blank	and	the	backlight	will	be	turned	off,	and	the	Power	LED	will	
light	“amber”.
For	the	indication	of	Energy	Saving	(standby)	mode,	please	refer	to	your	
user	guide.
Safety information
•	 Before	setting	up	the	monitor,	carefully	read	all	the	documentation	that	
came	with	the	package.
•	 To	prevent	fire	or	shock	hazard,	never	expose	the	monitor	to	rain	or	
moisture.
•	 Never	try	to	open	the	monitor	cabinet.	The	dangerous...

v
Care & Cleaning
•	 Before	you	lift	or	reposition	your	monitor,	it	is	better	to	disconnect	the	cables	
and	power	cord.	Follow	the	correct	lifting	techniques	when	positioning	the	
monitor.	When	lifting	or	carrying	the	monitor,	grasp	the	edges	of	the	monitor.	
Do	not	lift	the	display	by	the	stand	or	the	cord.
•	 Cleaning.	Turn	your	monitor	off	and	unplug	the	power	cord.	Clean	the	monitor	
surface	with	a	lint-free,	non-abrasive	cloth.	Stubborn	stains	may	be	removed	
with	a	cloth	dampened	with	mild...

viChapter	1:	Product	Introduction
Where	to	find	more	information
Refer	to	the	following	sources	for	additional	information	and	for	product	and	
software	updates.
1. ASUS websites
The	ASUS	websites	worldwide	provide	updated	information	on	ASUS	
hardware	and	software	products.	Refer	to	http://www.asus.com
2. Optional documentation
Your	product	package	may	include	optional	documentation	that	may	have	
been	added	by	your	dealer.	These	documents	are	not	part	of	the	standard	
package.
1.1  Welcome!
Thank	you...

1-1ASUS	LED	Monitor	VW248TLB	Series
1.3 Assembling the monitor base
To assemble the monitor base:
1.	 Place	 the	display	 flat	on	a	cloth	 on	the	 table,	 assemble	 the	base	 according	 to	
the	drawing	and	use	a	coin	to	turn	the	screw	tight.
2.	 Adjust	the	monitor	to	the	angle	that	is	most	comfortable	for	you.
•	We	recommend	that	you	cover	the	table	surface	with	soft	cloth	to	prevent	
damage	to	the	monitor.
1
2
90
90
  

1-2Chapter	1:	Product	Introduction
1.4 Monitor introduction
1.4.1  Front of the LED monitor
4571236
1. 	Button:
•	Automatically	adjust	the	image	to	its	optimized	position,	clock,	and	
phase	by	long	pressing	this	button	for	2-4	seconds	(for	VGA	mode	only).
•	Use	this	hotkey	to	switch	from	six	video	preset	modes	(Scenery	Mode,	
Standard	Mode,	Theater	Mode,	Game	Mode,	Night	View	Mode,	and	
sRGB	Mode)	with	SPLENDID™	Video	Intelligence	Technology.
•	Exit	the	OSD	menu	or	go	back	to	the	previous	menu	as	the	OSD...

1-3ASUS	LED	Monitor	VW248TLB	Series
6. 	Power	Button:
•	Press	this	button	to	turn	the	monitor	on/off.
7.	 Power	Indicator
StatusDescription
		BlueON
  AmberStandby	mode
  OFFOFF
1.4.2 Rear of the LED monitor
   
123465
1AC-IN port
2Line-in port
3DVI port
4VGA port
5USB upstream
6USB downstream x 2
Screw holes for 
VESA Wall Mount
  

2-1ASUS	LED	Monitor	VW248TLB	Series
2.1   Detaching the arm/stand 
(for VESA wall mount)
The	detachable	stand	of	the	VW248TLB	Series	LED	monitor	is	specially	designed	
for	VESA	wall	mount.
To detach the arm/stand:
1.	 Lower	the	monitor	to	its	lowest	height,	and	then	inset	the	monitor	height	
adjustment	lock.
2.	 Have	the	front	of	the	monitor	face	down	on	a	table.
3.	 Use	a	screwdriver	to	remove	the	two	screws	on	the	VESA	cover,the	slide	out	
the	arm/base	to	detach	it	from	themonitor.
•		
We	recommend...