Asus Vw226tl User Guide

1-3ASUS VW226 Series LCD Monitor 
1.3.2 Back view
5. Power button/power indicator
• Press this button to turn the monitor on/off 
• The color definition of the power indicator is as the below table.
1. Audio-in port
. This port connects PC audio source by the bundled audio 
cable. (VW22 6T / VW22 6S only)
2. AC-IN port
. This port connects the power connector from the bundled power 
cord.
3. DVI port
. This 24-pin port is for PC (Personal Computer) DVI-D digital signal 
connection. (VW22 6T / VW22 6N...

1-4Chapter 1: Product introduction
 

2-1ASUS VW226 Series LCD Monitor 
2.1 Assembling the monitor base
To assemble the monitor base: 
1. Have the front of the monitor face down on a table. 
2. Connect the base with the arm according to the below drawing. A click shows 
that the base has been connected successfully. 
We  recommend  that  you  cover  the  table  surface  with  soft  cloth  to  prevent 
damage to the monitor. 
2.2 Adjusting the monitor
• For optimal viewing, we recommend that you look at the full face of the 
monitor, then...

2-2Chapter 2: Setup
2.3 Detaching the arm/base
(for VESA wall mount)
The detachable arm/base of the VW22 6 Series LCD monitor is specially designed 
for VESA wall mount.  
To detach the arm/base:  
1. Have the front of the monitor face down on a table. 
2. Remove the rubbers in the four screw holes (Figure 1).
3. Use a screwdriver to remove the two screws on the arm (Figure 1), then slide  out the arm/base to detach it from the monitor (Figure 2).
We recommend that you cover the table surface with soft...

2-3ASUS VW226 Series LCD Monitor 
2.4 Connecting the cables
1. Connect the cables as the following instructions: • To connect the audio cable
: connect one end of the audio cable to the 
monitor’s Audio-in port, the other end to the computers audio-out port. 
• To connect the power cord
: connect one end of the power cord securely to 
the monitor’s AC input port, the other end to a power outlet.
• To connect the VGA/DVI cable
:
a. Plug the VGA/DVI connector to the LCD monitor’s VGA/DVI port. 
b. Connect...

2-4Chapter 2: Setup
 

3-1ASUS VW226 Series LCD Monitor 
3.1 OSD (On-Screen Display) menu 
3.1.1 How to reconfigure
1. Press the MENU button to activate 
the OSD menu. 
                     
2. Press
  and   to  navigate  through  the  functions.  Highlight  and  activate 
the  desired  function  by  pressing  the  MENU  button.  If  the  func tion  selected 
has a sub-menu, press 
 and  again to navigate through the sub-menu 
functions.  Highlight  and  activate  the  desired  sub-menu  function  by  pressing  the MENU...

3-2Chapter 3: General Instruction  
• Phase adjusts the phase of the pixel clock signal. With a wrong phase 
adjustment, the screen shows  horizontal disturbances.
• Clock (pixel frequency) controls the number of pixels scanned by one  horizontal sweep. If the frequency is not correct, the screen shows vertical  stripes and the image is not proportional.
3. Color
Select the image color you like  from this function. 
• Color Temp.
: contains five color modes including Cool, Normal,    
Warm, sRGB, and...

3-3ASUS VW226 Series LCD Monitor 
4. Input Select 
In this function, you can select 
either VGA or DVI input source. (Only for some models)
5. System Setup 
Allow you to adjust the system.
• Volume
: the adjusting range is from 0 to 100. 
 is a hotkey to activate 
this function. 
• OSD Setup
:
    * Adjusts the horizontal postition (H-Position)/ the vertical position Adjusts the horizontal postition (H-Position)/ the vertical positionAdjusts the horizontal postition (H-Position)/ the vertical position...

3-4Chapter 3: General Instruction  
 6SHFL¿FDWLRQVVXPPDU\9:61
Panel TypeTFT LCD
Panel size22 (16:10) wide screen
Max.  ResolutionWSXGA+ 1680 x 1050
Pixel pitch0.282mm
Brightness (Typ.)250cd/m2
Contrast Ratio (Typ.)1000:1
Contrast Ratio (Max.)50000:1 (with ASCR ON)
Viewing angle(H/V) CR>10† /160†
Display colors16.7M
Response time5ms
SPLENDID™ Video  EnhancementYes
SPLENDID™ selection5 video preset modes (by hotkey)
Auto adjustmentYes (by hotkey)
Color temperature selection5 color...