Asus Vw224s User Guide
Here you can view all the pages of manual Asus Vw224s User Guide. The Asus manuals for Monitor are available online for free. You can easily download all the documents as PDF.
Page 11
4. Button: • Press this button to increase the value of the function selected or move to the previous fuction. • This is also a hotkey for Brightness adjustment. 6. Power button • Press this button to turn the monitor on/off. 5. 7. Power indicator • Automatically adjust the image to its optimized position, clock, and phase by long pressing this button (for VGA mode only). button: 7 1.4.1.3 VW224D/VW221D 457123 • Use this hotkey to switch from five video...
Page 12
1.4.2 Rear connectors of the LCD monitor 2. Audio-in port . This port connects PC audio source by the bundled audio cable.(Only for some models) 1. AC-IN port . This port connects the power connector from the bundled power cord. 3. DVI port . This 4-pin port is for PC (Personal Computer) DVI-D digital signal connection. (Only for some models) 4. VGA port . This 15-pin port is for PC VGA connection. 2143 1-6 Chapter 1: Product introduction
Page 13
2.1 Detaching the arm/stand (for VESA wall mount) VESA wall mount. To detach the arm/stand: . Remove the arm cover. 2. Have the front of the monitor face down on a table. 3. Use a screwdriver to remove the three screws on the stand of the monitor as the below drawing shows. 4. Detach the arm from the monitor. • We recommend that you cover the table surface with soft cloth to prevent damage to the monitor. • Hold the stand of the monitor when you remove the...
Page 14
2.2 Adjusting the monitor • For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you. • Hold the stand to prevent the monitor from falling when you change its angle. • You can adjust the monitor’s angle from -5º to 20º. -5º~20º 2-2Chapter 2: Setup
Page 15
3- 3.1 OSD (On-Screen Display) menu 3.1.1 How to reconfigure . Press the MENU button to activate the OSD menu. 2. Press and to navigate through the functions. Highlight and activate the desired function by pressing the MENU button. If the function select\ ed has a sub-menu, press and again to navigate through the sub-menu functions. Highlight and activate the desired sub-menu function by press\ ing the MENU button. 3. Press and to change...
Page 16
3-2Chapter 3: General Instruction 2. Image You can adjust brightness, contrast, sharpness, saturation,position (VGA\ only), and focus (VGA only) from this main function. P1 • Brightness: the adjusting range is from 0 to 00. is a hotkey to activate this function. • • Sharpness: the adjusting range is from 0 to 00. • Saturation: the adjusting range is from 0 to 00. • Position: adjusts the horizontal postition (H-Position) and the vertical position...
Page 17
3-3 5. System Setup Allow you to adjust the system. • Volume: the adjusting range is from 0 to 00. is a hotkey to activate this function. • OSD Setup: adjusts the horizontal postition (H-Position) and the vertical position (V-Position) of the OSD. The adjusting range is from 0 to 00. In the OSD Timeout selection, you can adjust the OSD timeout from 0 to 20. • Language: there are ten languages for your selection, including English,...
Page 18
3- 4 Chapter 3: General Instruction 3.2 Specifications summary *Specifications are subject to change without notice. ModelVW224U VW224TPanel Size 22Wide22Wide Max. Resolution WSXGA+ 1680 x 1050 WSXGA+ 1680 x 1050 Brightness (Typ.) 300cd/㎡ 300cd/㎡ Contrast Ratio (Typ.) 1000:11000:1 Viewing Angle (H/V, CR=10) ≧160°(V) ; ≧170°(H) ≧160°(V) ; ≧170°(H) Display Colors 16.7 M16.7 M Response Time 2ms (Gray to Gray)5ms (On/Off) DVI with HDCP DVI with HDCP DVI input D-Sub input...
Page 19
*Specifications are subject to change without notice. ModelVW221S VW221DPanel Size 21.6Wide21.6Wide Max. Resolution WSXGA+ 1680 x 1050 WSXGA+ 1680 x 1050 Brightness (Typ.) 300cd/㎡ 300cd/㎡ Contrast Ratio (Typ.) 1000:11000:1 Viewing Angle (H/V, CR=10) ≧160°(V) ; ≧170°(H) ≧160°(V) ; ≧170°(H) Display Colors 16.7 M16.7 M Response Time 5ms (On/Off)5ms (On/Off) D-Sub input YesYes Satellite Speaker 1W x 2 stereo- Tilt VESA Wall Mounting Yes (100mm x 100mm) Yes (100mm x 100mm) Phys. Dimension (WxHxD) Box...
Page 20
3.3 Troubleshooting (FAQ) ProblemPossible Solution Power LED is not ON• Press the button to check if the monitor is in the ON mode. • Check if the power cord is properly connected to the monitor and the power outlet. The power LED lights amber and there is no screen image • Check if the monitor and the computer are in the ON mode. • Make sure the signal cable is properly connected the monitor and the computer. • Inspect the signal cable and make sure none of the...