Asus Vw223b User Guide

							
1-3ASUS VW223 Series LCD Monitor 

6.  Power Button / Power Indicator:
 • Press this button to turn the monitor on/off
  • The color definition of the power indicator is as the below table.
StatusDescription
  BlueON
  AmberStandby mode
  OFFOFF
VW223S
123456
1.  Button:
•  Use this hotkey to switch from five video preset modes (Scenery M ode, 
Standard Mode, Theater Mode, Game Mode, Night View Mode) with 
SPLENDID™ Video Enhancement Technology.
• Exit the OSD menu or go back to the previous menu as the OSD menu 
is active.
2.  Button:
• Press this button to decrease the value of the function selected or move 
left/down to the next function. 
• This is also a hotkey for Volume adjustment.
3.  MENU Button: 
• Press this button to enter/select the icon (function) highlighted whil\
e the 
OSD is activated. 
4.  Button:
• Press this button to increase the value of the function selected or move 
right/up to the previous function.
• This is also a hotkey for Brightness adjustment. 
5.  Button:
• Automatically adjust the image to its optimized position, clock, and phase 
by pressing this button for 2-4 seconds.
6.  Power Button / Power Indicator:
  • Press this button to turn the monitor on/off
  • The color definition of the power indicator is as VW223B.
 
						

							
1-4Chapter 1: Product introduction

VW223D
1.  Button:
• Use this hotkey to switch from five video preset modes (Scenery M ode, 
Standard Mode, Theater Mode, Game Mode, Night View Mode) with 
SPLENDID™ Video Enhancement Technology.
• Exit the OSD menu or go back to the previous menu as the OSD menu 
is active.
2.  Button: 
• Press this button to decrease the value of the function selected or move 
left/down to the previous function. 
• This is also a hotkey for Contrast adjustment.
3.  MENU Button: 
• Press this button to enter/select the icon (function) highlighted whil\
e the 
OSD is activated. 
4.  Button:
• Press this button to increase the value of the function selected or move 
right/up to the previous function.
• This is also a hotkey for Brightness adjustment. 
5.  Button:
• Automatically adjust the image to its optimized position, clock, and phase 
by pressing this button for 2-4 seconds.
6.  Power Button / Power Indicator:
  • Press this button to turn the monitor on/off
  • The color definition of the power indicator is as VW223B.
546321
 
						

							
1-5ASUS VW223 Series LCD Monitor 

VW223N
1.  Button:
• Use this hotkey to switch from five video preset modes (Scenery M ode, 
Standard Mode, Theater Mode, Game Mode, Night View Mode) with 
SPLENDID™ Video Enhancement Technology.
• Exit the OSD menu or go back to the previous menu as the OSD menu 
is active.
• Automatically adjust the image to its optimized position, clock, and phase 
by pressing this button for 2-4 seconds (for VGA mode only).
2.  Button: 
• Press this button to decrease the value of the function selected or move 
left/down to the previous function. 
• This is also a hotkey for Contrast adjustment.
3.  MENU Button: 
• Press this button to enter/select the icon (function) highlighted whil\
e the 
OSD is activated. 
4.  Button:
• Press this button to increase the value of the function selected or move 
right/up to the previous function.
• This is also a hotkey for Brightness adjustment. 
5.  Button:
• Use this hotkey to switch between the input sources (VGA and DVI).
6.  Power Button / Power Indicator:
  • Press this button to turn the monitor on/off
  • The color definition of the power indicator is as VW223B.
546321
 
						

							
1-6Chapter 1: Product introduction

VW223T
1.  Button:
• Use this hotkey to switch from five video preset modes (Scenery M ode, 
Standard Mode, Theater Mode, Game Mode, Night View Mode) with 
SPLENDID™ Video Enhancement Technology.
• Exit the OSD menu or go back to the previous menu as the OSD menu 
is active.
• Automatically adjust the image to its optimized position, clock, and phase 
by pressing this button for 2-4 seconds (for VGA mode only).
2.  Button:
• Press this button to decrease the value of the function selected or move 
left/down to the next function. 
• This is also a hotkey for Volume adjustment.
3.  MENU Button: 
• Press this button to enter/select the icon (function) highlighted whil\
e the 
OSD is activated. 
4.  Button:
• Press this button to increase the value of the function selected or move 
right/up to the previous function.
• This is also a hotkey for Brightness adjustment. 
5.  Button:
• Use this hotkey to switch between the input sources (VGA and DVI).
6.  Power Button / Power Indicator:
  • Press this button to turn the monitor on/off
  • The color definition of the power indicator is as VW223B.
546321
 
						

							
1-7ASUS VW223 Series LCD Monitor 

1.3.2 Back view
Rear connectors 
Stereo speaker
Rear connectors
Stereo speaker
Screw holes for VESA Wall Mount
4321
USB hub
1. AC-IN port. This port connects the power connector from the bundled power 
cord.
2. Audio-in port (VW223S, VW223T only). This port connects PC audio 
source by the bundled audio cable.
3. DVI port (VW223N, VW223T onlyl). This 24-pin port is for PC (Personal 
Computer) DVI-D digital signal connection.
4. VGA port. This 15-pin port is for PC VGA connection.
5. USB 2.0 port (VW223B only). This port is for the built-in USB hub and ASUS 
EzLink Display connection.
5
 
						

							
1-8Chapter 1: Product introduction
 
						

							
2-1ASUS VW223 Series LCD Monitor 
2.1 Assembling the monitor base
To assemble the monitor base:
1. Have the front of the monitor face down on a table.
2. Connect the base with the arm according to the below drawing. A click shows 
that the base has been connected successfully. 
We recommend that you cover the table surface with soft cloth to prevent \
damage to the monitor. 
2.2  Adjusting the monitor
• For optimal viewing, we recommend that you look at the full face of the monitor, 
then adjust the monitor to the angle that is most comfortable for you.
• Hold the stand to prevent the monitor from falling when you change its angle.
• You can adjust the monitor’s angle from -5º to 25º.
It is normal that the monitor slightly shakes while you adjust the the v\
iewing angle. 
 -5º~25º
 
						

							
2-2Chapter 2: Setup

2.3 Detaching the arm/base  
 (for VESA wall mount)
The detachable arm/base of the VW223 Series LCD monitor is specially designed 
for VESA wall mount. 
To detach the arm/base: 
1. Have the front of the monitor face down on a table.
2. Remove the rubbers in the four screw holes (Figure 1).
3. Use a screwdriver to remove the two screws on the arm (Figure 1), then slide 
out the arm/base to detach it from the monitor (Figure 2).
Arm/base
Rubbers in the screw holes 
Two screws 
Figure 1
Figure 2
We recommend that you cover the table surface with soft cloth to prevent \
damage to the monitor.
 
						

							
2-3ASUS VW223 Series LCD Monitor 

2.4 Connecting the cables
1. Connect the cables as the following instructions:
2.5  Turning on the monitor
Gently press the power button  . See page 1-2 for the location of the power 
button. The power indicator  lights up in blue to show that the monitor is ON.
When both the VGA and the DVI cables are connected, you can choose either VGA mode or DVI mode from the Input Select item of the OSD functions.
2. Gather all the cables with the cable hook.
Cable hook
VGADVIAUDIOINAC-IN(B-Type)2.0
• To connect the power cord: connect one end of the power cord securely to 
the monitor’s AC input port, and the other end to a power outlet.
• To connect the USB cable (VW223B only): connect the B-type end of the 
USB cable to the monitor's USB port, and the A-type end to the computer's 
USB 2.0 port. 
• To connect the VGA cable / DVI cable (VW223N / VW223T only): 
a. Plug the VGA / DVI connector to the LCD monitor’s VGA / DVI port.
b. Connect the other end of the VGA / DVI cable to your computer’s VGA / 
DVI port.
c. Tighten the two screws to secure the VGA / DVI connector.
• To connect the audio cable (VW223S / VW223T only): connect one end 
of the audio cable to the monitor’s Audio-in port, and the other end to the 
computer's audio-out port. 
 
						

							
2-4Chapter 2: Setup