Asus Vw223b User Guide

3-1ASUS VW223 Series LCD Monitor 
3.1 OSD (On-Screen Display) menu 
3.1.1	 How	to	reconfigure
1. Press the MENU button to activate the 
OSD menu. 
2. Press  and  to navigate through the 
functions. Highlight and activate the 
desired function by pressing the MENU 
button. If the function selected has a sub-
menu, press  and  again to navigate 
through the sub-menu functions. Highlight 
and activate the desired sub-menu 
function by pressing the MENU button.  
3. Press  and  to change the settings of the...

3-2Chapter 3: General Instruction  

3. Color  
Select the image color you like from this 
function. 
• Color Temp.: contains five color 
modes including Cool, Normal, Warm, 
sRGB, and User mode.
• Skin Tone: contains three color 
modes including Reddish, Natural, 
and Yellowish. 
In the User mode, colors of R (Red), G (Green), and B (Bluee) are \
user-configurable; the adjusting range is from 0-100.
• Phase adjusts the phase of the pixel clock signal. With a wrong phase adjustment, the screen shows...

3-3ASUS VW223 Series LCD Monitor 

4. Input Select 
In this function, you can select from VGA, 
DVI (Only for some models), or EzLink 
(VW223B only) input source. 
5. System Setup 
Allow you to adjust the system.
• Volume: the adjusting range is from 
0 to 100.  is a hotkey to activate 
this function (for those models with 
speakers.). 
• OSD Setup: 
 *Adjusts the horizontal postition 
(H-Position)/ the vertical position (V-Position) of the OSD from 0 to 100. 
 *Adjusts the OSD timeout from 10 to 120....

3-4Chapter 3: General Instruction  

3.2 ASUS EzLink Display (VW223B only)
ASUS VW223B provides the easy-to-use EzLink Display that allows you to transfer 
digital video signal from your PC to your LCD via a standard USB 2.0 cable. 
Without the necessity of purchasing additional graphics cards, EzLink Dis play 
supports up to 6 ASUS LCD monitors connected to a single PC, providing the 
flexibility for multi-screen applications.
15
6
2
34
• The above illustration of multi-monitor connection is for...

3-5ASUS VW223 Series LCD Monitor 

3.2.2 Installing ASUS EzLink Display:
1. Close all other applications.
2. Insert the support CD into the 
optical drive and select the EzLink 
Driver.
3. Select the language of the software 
end user licence agreement and 
click I Accept.
4. The software installation starts. 
When finished, click Yes to restart 
the computer.
 

3-6Chapter 3: General Instruction  

3.2.3 Using ASUS EzLink Display:
Right-click the EzLink system tray icon to show the EzLink software men u.
Check	and	configure	software	update	options
Fast-switch supported screen resolutions (Recommended: 1680x1050)Sets the color depth between 16 bit and 32 bit (Recommended: 32 bit)
Sets the direction of screen rotation 
Sets the location of the extended desktop
Enables desktop extension
Mirrors the content of the primary desktop to the extended desktop
Turn off...

3-7ASUS VW223 Series LCD Monitor 

3.3	 Specifications	summary
(continued on the next page)
Model NameVW223BVW223SVW223DVW223NVW223T
Display  Panel Size22" Wide Screen
Panel TypeTN
Physical Resolution1680 x 1050
Brightness (Max.)300cd/ m2
Intrisinc Contrast Ratio (Max.)1000:1 
Dynamic Contrast Ratio (Max.)3000:1 
Viewing Angle (CR=10)160°(V) ; 170°(H)
Color Saturation (NTSC)72%
Display Colors16.7 M (6-bit + Hi-FRC)
Response Time5ms (Tr+Tf)
Video FeaturesHDCP supportNoNoNoYesYes
SPLENDID™ Video...

3-8Chapter 3: General Instruction  

*Specifications	are	subject	to	change	without	notice.
Model NameVW223BVW223SVW223DVW223NVW223T
Input / OutputPC Digital InputUSB 2.0NoNoDVIDVI
PC Analogue InputD-Sub
PC Audio Input (to built-in speakers)No3.5mm Mini-jackNoNo3.5mm Mini-jack
Microphone InputNo
Earphone OutputNo
Power ConsumptionPower ON65 W55W55W55W55W
Power Saving Mode< 2W
Power OFF Mode< 1W
Mechanical DesignDetachable Base Yes
Tilt+25° to -5°
SwivelNo
PivotNo
Height Adjustment No
VESA Wall...

3-9ASUS VW223 Series LCD Monitor 

3.4 Troubleshooting (FAQ)
ProblemPossible Solution
Power  LED is not ON•  Press the  button to check if the monitor      is in the ON mode. •  Check if the power cord is properly     connected to the monitor and the power    outlet. 
The power LED lights amber and there is no screen image •  Check if the monitor and the computer are    in the ON mode. •  Make sure the signal cable is properly      connected the monitor and the computer. •  Inspect the signal cable and...

3-10Chapter 3: General Instruction  
3.5 Supported operating modes
* Modes not listed in the table may not be supported. For optimal resolu\
tion, we recommend that     you choose a mode listed in the table above.
ResolutionRefresh RateHorizontal FrequencyStandard Type
720 x 40070 Hz31.5 kHzDOS
640 x 48060 Hz31.5 kHzIndustry Standard
640 x 48067 Hz35.0 kHzMAC
640 x 48072 Hz37.9 kHzVESA Standard
640 x 48075 Hz37.5 kHzVESA Standard
800 x 60060 Hz37.9 kHzVESA Guidelines
800 x 60072 Hz48.1 kHzVESA Standard...