Asus Vw220t User Guide

							
3-5ASUS VW220 Series LCD Monitor 

Specifications summary (VW220S)
Panel TypeTFT LCD
Panel size21.6" (16:10) wide screen
Max.  ResolutionWSXGA+ 1680 x 1050
Pixel pitch0.277mm
Brightness (Typ.)300cd/m2
Contrast Ratio (Typ.)1000:1
Contrast Ratio (Max.)4000:1 (with ASCR ON)
Viewing angle(H/V) CR>10170˚��160˚
Display colors16.7M
Response time5ms
SPLENDID™ Video EnhancementYes
SPLENDID™ selection5 video preset modes (by hotkey)
Auto adjustmentYes (by hotkey)
Color temperature selection5 color temperatures
Skin-Tone selection3 skin-tones
Analog inputD-Sub
ColorsBlack
Power LEDBlue (On)/ Amber (Standby)
VESA wall mount100 x 100mm
Tilt-5˚�+20˚
Kensington lockYes
Voltage ratingAC: 100�240V
Power consumptionPower On : < 47W, Standby: < 2W, Power Off: 
						

							
3-6Chapter 3: General Instruction  

Specifications summary (VW220D)
Panel TypeTFT LCD
Panel size21.6" (16:10) wide screen
Max.  ResolutionWSXGA+ 1680 x 1050
Pixel pitch0.277mm
Brightness (Typ.)300cd/m2
Contrast Ratio (Typ.)1000:1
Contrast Ratio (Max.)4000:1 (with ASCR ON)
Viewing angle(H/V) CR>10170˚��160˚
Display colors16.7M
Response time5ms
SPLENDID™ Video EnhancementYes
SPLENDID™ selection5 video preset modes (by hotkey)
Auto adjustmentYes (by hotkey)
Color temperature selection5 color temperatures
Skin-Tone selection3 skin-tones
Analog inputD-Sub
ColorsBlack
Speaker (Built-in)N/A
Power LEDBlue (On)/ Amber (Standby)
VESA wall mount100 x 100mm
Tilt-5˚�+20˚
Kensington lockYes
Voltage ratingAC: 100�240V
Power consumptionPower On : < 47W, Standby: < 2W, Power Off: 
						

							
3-7ASUS VW220 Series LCD Monitor 

Specifications summary (VW220N)
Panel TypeTFT LCD
Panel size21.6" (16:10) wide screen
Max.  ResolutionWSXGA+ 1680 x 1050
Pixel pitch0.277mm
Brightness (Typ.)300cd/m2
Contrast Ratio (Typ.)1000:1
Contrast Ratio (Max.)4000:1 (with ASCR ON)
Viewing angle(H/V) CR>10170˚��160˚
Display colors16.7M
Response time5ms
SPLENDID™ Video EnhancementYes
SPLENDID™ selection5 video preset modes (by hotkey)
Auto adjustmentYes (by hotkey)
Color temperature selection5 color temperatures
Skin-Tone selection3 skin-tones
Analog inputD-Sub and DVI
ColorsBlack
Speaker (Built-in)N/A
Power LEDBlue (On)/ Amber (Standby)
VESA wall mount100 x 100mm
Tilt-5˚�+20˚
Kensington lockYes
Voltage ratingAC: 100�240V
Power consumptionPower On : < 47W, Standby: < 2W, Power Off: 
						

							
3-8Chapter 3: General Instruction  

3.3 Troubleshooting (FAQ)
ProblemPossible Solution
Power  LED is not ON•  Press the  button to check if the monitor      is in the ON mode. •  Check if the power cord is properly     connected to the monitor and the power    outlet. 
The power LED lights amber and there is no screen image •  Check if the monitor and the computer are    in the ON mode. •  Make sure the signal cable is properly      connected the monitor and the computer. •  Inspect the signal cable and make sure      none of the pins are bent. •  Connect the computer with another     available monitor to check if the computer     is properly working.
Screen image is too light or dark•  Adjust the Contrast and Brightness settings    via OSD.
Screen image is not centered or sized properly•  Press the Splendid button for two seconds      to     automatically adjust the image.  •  Adjust the H-Position or V-Position settings    via OSD.
Screen image bounces or a wave pattern is present in the image•  Make sure the signal cable is properly     connected to the monitor and the computer. •  Move electrical devices that may cause       electrical interference.
Screen image has color defects (white does not look white)•  Inspect the signal cable and make sure that     none of the pins are bent.  •  Perform Reset via OSD. •  Adjust the R/G/B color settings or select the     Color Temperature via OSD.
Screen image is blurry or fuzzy•  Press the Splendid button for two seconds     to automatically adjust the image (for VGA    mode only). •  Adjust the Phase and Clock settings via     OSD.
No sound or sound is low•  Ensure that the audio cable is properly       connected to the monitor and the computer •  Adjust the volume settings of both your     monitor and computer.  •  Ensure that the computer sound card driver     is properly installed and activated.
 
						

							
3-9ASUS VW220 Series LCD Monitor 

3.4 Supported operating modes
* Modes not listed in the table may not be supported. For optimal resolu\
tion, we recommend that     you choose a mode listed in the table above.
StandardResolution FrequencyHorizontal FrequencyVertical Frequency
DOS720 x 40031.47KHz70Hz
VGA640 x 48031.47KHz60Hz640 x 48037.90KHz72Hz640 x 48037.50KHz75Hz
SVGA800 x 60035.16KHz56Hz800 x 60037.90KHz60Hz800 x 60048.10KHz72Hz800 x 60046.90KHz75Hz
XGA1024 x 76848.40KHz60Hz1024 x 76856.50KHz70Hz1024 x 76860.02KHz75Hz
SXGA1280 x 96060.00KHz60Hz1280 x 102464.00KHz60Hz1280 x 102480.00KHz75Hz
VESA1152 x 864 67.50KHz75Hz
VESA1440 x 90055.94KHz60Hz
VESA1280 x 720-60Hz
VESA1280 x 800-60Hz
WSXGA+ (primary)1680 x 105065.3KHz60Hz
 
						

							
3-10Chapter 3: General Instruction