Asus Vw202tr User Guide

1-3ASUS VW202xR/VW202B LCD Monitor

1.3.2 Back view
5.  Power button/power indicator          
 • Press this button to turn the monitor on/off
  • The color definition of the power indicator is as the below table.
1. Audio-in port. This port connects PC audio source by the bundled audio 
cable.
2. AC-IN port. This port connects the power connector from the bundled power 
cord.
3. DVI port. This 24-pin port is for PC (Personal Computer) DVI-D digital signal 
connection.
  USB port (VW202B only). This...

1-4Chapter 1: Product introduction
 

2-1ASUS VW202xR/VW202B LCD Monitor
2.1 Assembling the monitor base
To assemble the monitor base:
1. Have the front of the monitor face down on a table.
2. Connect the base with the arm according to the below drawing. A click shows 
that the base has been connected successfully. 
We recommend that you cover the table surface with soft cloth to prevent \
damage to the monitor. 
2.2  Adjusting the monitor
• For optimal viewing, we recommend that you look at the full face of the 
monitor, then adjust the...

2-2Chapter 2: Setup

2.3 Detaching the arm/base  
 (for VESA wall mount)
The detachable arm/base of the VW202xR/VW202B LCD monitor is specially 
designed for VESA wall mount. 
To detach the arm/base: 
1. Have the front of the monitor face down on a table.
2. Remove the rubbers in the four screw holes (Figure 1).
3. Use a screwdriver to remove the two screws on the arm (Figure 1), then slide 
out the arm/base to detach it from the monitor (Figure 2).
We recommend that you cover the table surface with...

2-3ASUS VW202xR/VW202B LCD Monitor

2.4 Connecting the cables
1. Connect the cables as the following instructions:
• To connect the power cord: connect one end of the power cord securely to 
the monitor’s AC input port, the other end to a power outlet.
• To connect the USB cable (VW202B only): connect the B-type end of the 
USB cable to the monitor's USB port, and the A-type end to the computer's 
USB 2.0 port. 
• To connect the VGA cable / DVI cable: 
a. Plug the VGA / DVI connector to the LCD...

2-4Chapter 2: Setup
 

3-1ASUS VW202xR/VW202B LCD Monitor
3.1 OSD (On-Screen Display) menu 
3.1.1  How to reconfigure
1. Press the MENU button to activate  
the OSD menu. 
                    
           
2. Press  and  to navigate through the functions. Highlight and activate 
the desired function by pressing the MENU button. If the function select\
ed 
has a sub-menu, press  and  again to navigate through the sub-menu 
functions. Highlight and activate the desired sub-menu function by press\
ing 
the MENU button.  
3. Press...

3-2Chapter 3: General Instruction  

• Phase adjusts the phase of the pixel clock signal. With a wrong phase adjustment, the screen shows  horizontal disturbances.
• Clock (pixel frequency) controls the number of pixels scanned by one horizontal sweep. If the frequency is not correct, the screen shows vert\
ical stripes and the image is not proportional.
3.  Color  
 Select the image color you like 
 from this function. 
 
 • Color Temp.: contains five color modes including Cool, Normal,    
  Warm,...

3-3ASUS VW202xR/VW202B LCD Monitor

4. Input Select 
 In this function, you can select  
either VGA, DVI, or EzLink (VW202B 
only) input source.
5. System Setup 
 Allow you to adjust the system.
 • Volume: the adjusting range is from 0 to 100.  is a hotkey to activate  
  this function. 
 • OSD Setup: 
    *���Adjusts the horizontal postition (H-Position)/ the vertical position   Adjusts the horizontal postition (H-Position)/ the vertical positionAdjusts the horizontal postition (H-Position)/ the...

3-4Chapter 3: General Instruction  

3.2 ASUS EzLink Display (VW202B only)
ASUS EzLink Display allows you to transfer digital video signal from you\
r PC 
to your LCD via a standard USB 2.0 cable. Without the necessity of purch\
asing 
additional graphics cards, EzLink Display provides the flexibility for m\
ulti-screen 
applications.
3.2.1 System requirements
Before you install the ASUS EzLink Display software, check if your system meets 
the following requirements:
Hardware:
• PC with 1.2 GHz or...