Asus Vw202bl User Guide

1-3ASUS VW195xL/VW202xL/VW225xL Series LCD Monitor 

1.3.2 Back view
1. Audio-in port. This port connects PC audio source by the bundled audio 
cable.
2. AC-IN port. This port connects the power connector from the bundled power 
cord.
3. DVI port. This 24-pin port is for PC (Personal Computer) DVI-D digital signal 
connection.  
4. VGA port. This 15-pin port is for PC VGA connection. 
Rear connectors 
StatusDescription
  BlueON
  AmberStandby mode
  OFFOFF
Stereo speaker
Rear connectors
Stereo...

1-4Chapter 1: Product introduction
 

2-1ASUS VW195xL/VW202xL/VW225xL Series LCD Monitor 
2.1 Assembling the monitor base
To assemble the monitor base
1. Have the monitor base place on a flat table.
2. Connect the base with the arm according to the below drawing. A click sound 
shows that the base has been connected successfully. 
3. Remove the monitor height adjustment lock.
1
23
The monitor height adjustment lock should NEVER be removed BEFORE you place the monitor VERTICALLY on a flat surface.
 

2-2Chapter 2: Setup

2.3 Detaching the arm/base (for VESA  
 wall mount)
The detachable arm / base of the VW195xL/VW202xL/VW225xL Series LCD 
monitor is specially designed for VESA wall mount. 
To detach the arm/base
1. Lower the monitor to its lowest height, and then insert the monitor height 
adjustment lock (Figure 1).
2. Have the front of the monitor face down on a table.
3. Remove the rubbers in the four screw holes (Figure 2).
4. Use a screwdriver to remove the two screws on the arm (Figure 2),...

2-3ASUS VW195xL/VW202xL/VW225xL Series LCD Monitor 

We recommend that you cover the table surface with soft cloth to prevent \
damage to the monitor.
Arm/base
Rubbers in the screw holes 
Two screws 
Figure 2
Figure 3
Figure 1
 

2-4Chapter 2: Setup

2.5 Connecting the cables
1. Connect the cables as the following instructions:
• To connect the audio cable: connect one end of the audio cable to the  
monitor’s Audio-in port, the other end to the computer's audio-out port. 
• To connect the power cord: connect one end of the power cord securely to 
the monitor’s AC input port, the other end to a power outlet.
• To connect the VGA/DVI cable: 
 a. Plug the VGA/DVI connector to the LCD monitor’s VGA/DVI port.  
b. Connect the...

2-5ASUS VW195xL/VW202xL/VW225xL Series LCD Monitor 

2.6 Turning on the monitor
Gently press the power button  . See page 1-2 for the location of the power 
button. The power indicator  lights up in blue to show that the monitor is ON.
2. Gather all the cables with the cable hook.
Cable hook
When both the VGA and the DVI cables are connected, you can choose either VGA mode or DVI mode from the Input Select item of the OSD functions.
 

2-6Chapter 2: Setup
 

3-1ASUS VW195xL/VW202xL/VW225xL Series LCD Monitor 
3.1 OSD (On-Screen Display) menu 
3.1.1  How to reconfigure
1. Press the MENU button to activate the 
OSD menu. 
2. Press  and  to navigate through 
the functions. Highlight and activate the 
desired function by pressing the MENU 
button. If the function selected has a 
sub-menu, press  and  again to 
navigate through the sub-menu functions. 
Highlight and activate the desired sub-
menu function by pressing the MENU button.
3. Press  and  to change the...

3-2Chapter 3: General Instruction  

3. Color
Select the image color you like from this 
function. 
• Color Temp.: contains five color 
modes including Cool, Normal, Warm, 
sRGB, and User mode.
• Skin Tone: contains three color 
modes including Reddish, Natural, 
and Yellowish. 
In the User mode, colors of R (Red), G (Green), and B (Blue) are u\
ser-configurable; the adjusting range is from 0-100.
• Phase adjusts the phase of the pixel clock signal. With a wrong phase adjustment, the screen shows...