Asus Vw197dr User Guide

							  
VW197 Series 
LCD Monitor
User Guide
November 
2011
 
						

							ii
Copyright © 2011 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in\
 it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated in\
to any language in any form or by any means, except documentation kept by the purchaser for backup purposes, w\
ithout the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. 
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be \
registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.
Table of contentsNotices ........................................................................\
.................................iii
Safety information ........................................................................\
..............iv
Care & Cleaning ........................................................................\
...................v
1.1 Welcome! ........................................................................\
..............1-1
1.2 Package contents ........................................................................\
.1-1
1.3 Assembling the monitor   .............................................................1-2
1.4 Monitor introduction  ....................................................................1-3
1.4.1 Front of the LCD monitor ..............................................1-3
1.4.2 Rear of the LCD monitor ...............................................1-5
1.4.3 WiringtocomplywithTCOCertified (VW197TR/VW197NR/VW197SR/VW197DR) ................1-6
2.1.  
Detaching the arm/stand 
(for VESA wall mount)  .................................................................2-1
2.2. Adjusting the monitor ..................................................................2-2
3.1 OSD (On-Screen Display) menu .................................................3-1
3.1.1 Howtoreconfigure .......................................................3-1
3.1.2 OSD Function Introduction ..........................................3-1
3.2 Specifications ........................................................................\
.......3-5
3.3 Troubleshooting (FAQ) ................................................................3-6
3.4 Supported timing list ...................................................................3-7
  
						

							iii
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject\
 
to the following two conditions:
•	This device may not cause harmful interference, and
•	This device must accept any interference received including 
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a\
 
Class B digital device, pursuant to Part 15 of the FCC Rules. These limi\
ts 
are designed to provide reasonable protection against harmful interferen\
ce 
in a residential installation. This equipment generates, uses and can 
radiate radio frequency energy and, if not installed and used in accordance 
with manufacturer’s instructions, may cause harmful interference to r\
adio 
communications. However, there is no guarantee that interference will 
not occur in a particular installation. If this equipment does cause har\
mful 
interference to radio or television reception, which can be determined b\
y 
turning the equipment off and on, the user is encouraged to try to corre\
ct 
the interference by one or more of the following measures:
•	Reorient or relocate the receiving antenna.
•	Increase the separation between the equipment and receiver.
•	Connect the equipment to an outlet on a circuit different from that to 
which the receiver is connected.
•	Consult the dealer or an experienced radio/TV technician for help.
As an Energy Star® Partner, our company has determined 
that this product meets the Energy Star® guidelines for 
energy	efficiency.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio 
noise emissions from digital apparatus set out in the Radio Interference\
 
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
  
						

							iv
Safety information
•	Before setting up the monitor, carefully read all the documentation that\
 
came with the package.
•	To	prevent	fire	or	shock	hazard,	never	expose	the	monitor	to	rain	or	
moisture.
•	Never try to open the monitor cabinet. The dangerous high voltages 
inside the monitor may result in serious physical injury.
•	If	the	power	supply	is	broken,	do	not	try	to	fix	it	by	yourself.	Contact	a	
qualified	service	technician	or	your	retailer.
•	Before using the product, make sure all cables are correctly connected 
and the power cables are not damaged. If you detect any damage, 
contact your dealer immediately. 
•	Slots and openings on the back or top of the cabinet are provided for 
ventilation. Do not block these slots. Never place this product near or \
over a radiator or heat source unless proper ventilation is provided.  
•	The monitor should be operated only from the type of power source 
indicated on the label. If you are not sure of the type of power supply \
to 
your home, consult your dealer or local power company. 
•	Use the appropriate power plug which complies with your local power 
standard. 
•	Do not overload power strips and extention cords. Overloading can 
result	in	fire	or	electric	shock.
•	Avoid dust, humidity, and temperature extremes. Do not place the 
monitor in any area where it may become wet. Place the monitor on a 
stable surface.
•	Unplug the unit during a lightning storm or if it will not be used for a\
 
long period of time. This will protect the monitor from damage due to 
power surges. 
•	Never push objects or spill liquid of any kind into the slots on the 
monitor cabinet.
•	To ensure satisfactory operation, in case use at a PC then it should 
use the monitor only with computers which have appropriate 
configured	receptacles	marked	between	100-240V	AC.
•	If you encounter technical problems with the monitor, contact a 
qualified	service	technician	or	your	retailer.
•	The wall socket shall be installed near the equipment and shall be easil\
y 
accessible.
  
						

							v
Care & Cleaning
•	Before you lift or reposition your monitor, it is better to disconnect t\
he cables 
and power cord. Follow the correct lifting techniques when positioning t\
he 
monitor. When lifting or carrying the monitor, grasp the edges of the mo\
nitor. 
Do not lift the display by the stand or the cord.
•	Cleaning. Turn your monitor off and unplug the power cord. Clean the mon\
itor 
surface with a lint-free, non-abrasive cloth. Stubborn stains may be rem\
oved 
with a cloth dampened with mild cleaner.
•	Avoid using a cleaner containing alcohol or acetone. Use a cleaner inten\
ded 
for use with the LCD. Never spray cleaner directly on the screen, as it \
may drip 
inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:
•	The	screen	 may	flicker	 during	 the	initial	 use	due	 to	the	 nature	 of	the	 fluorescent	
light. Turn off the Power Switch and turn it on again to make sure that \
the 
flicker	disappears.
•	You	may	find	slightly	uneven	brightness	on	the	screen	depending	on	the	
desktop pattern you use.
•	When the same image is displayed for hours, an afterimage of the previou\
s 
screen may remain after switching the image. The screen will recover slo\
wly or 
you can turn off the Power Switch for hours.
•	When	the	screen	becomes	black	or	flashes,	or	cannot	work	anymore,	contact	
your	dealer	or	service	center	to	fix	it.	Do	not	repair	the	screen	by	yourself!
Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying to 
complete a task.
CAUTION: Information to prevent damage to the components when 
trying to complete a task.
IMPORTANT: Information that you MUST follow to complete a task.
NOTE: Tips and additional information to aid in completing a task.
  
						

							vi
Wheretofindmoreinformation
Refer to the following sources for additional information and for produc\
t and 
software updates.
1. ASUS websites
The ASUS websites worldwide provide updated information on ASUS 
hardware and software products. Refer to http://www.asus.com
2. Optional documentation
Your product package may include optional documentation that may have 
been added by your dealer. These documents are not part of the standard \
package.
  
						

							1-1ASUS LCD Monitor VW197 Series
1.1 Welcome!
Thank you for purchasing the ASUS®	VW197	Series	LCD	monitor!
The latest widescreen LCD monitor from ASUS provides a crisper, broader,\
 and 
brighter display, plus a host of features that enhance your viewing expe\
rience.
With these features, you can enjoy the convenience and delightful visual\
 
experience	that	the	VW197	Series	brings	you!
1.2 Package contents
Check your VW197 Series LCD Monitor package for the following items:
 9LCD monitor
 9Monitor stand and base
 9User manual CD
 9Quick start guide
 9Warranty card
 9Power cord
 9VGA cable
 9Audio cable (VW197T/TR/S/SR)
 9Cable holder (VW197TR/NR/SR/DR)
•	 
If any of the above items is damaged or missing, contact your retailer 
immediately.
  
						

							1-2Chapter 1: Product Introduction
1.3 Assembling the monitor 
To assemble the monitor:
1. Have the front of the monitor face down on a table.
2. Insert the stand to the monitor which shows as below picture. 
3. Connect the base with the monitor. A click indicates that the base has b\
een 
connected successfully.
4.	Adjust the monitor to the angle that is most comfortable.
•	 
We recommend that you cover the table surface with soft cloth to prevent\
 
damage to the monitor.
123
  
						

							1-3ASUS LCD Monitor VW197 Series
1.4 Monitor introduction
1.4.1 Front of the LCD monitor
1.4.1.1 VW197T/VW197TR/VW197S/VW197SR
56
1.  Button:
•	Automatically	adjust	the	image	to	its	optimized	position,	clock,	and	
phase	by	long	pressing	this	button	for	2-4	seconds	(for	VGA	mode	only).
•	Use this hot key to switch from six video preset modes (Scenery Mode, 
Standard Mode, Theater Mode, Game Mode, Night View Mode, and 
sRGB Mode) with SPLENDID™ Video Intelligence Technology.
•	Exit the OSD menu or go back to the previous menu as the OSD menu 
is active.
2.  Button:
•	Press this button to decrease the value of the function selected or move\
 
to the next function.
•	This is also a hot key for Volume adjustment.
3. MENU Button:
•	Press this button to enter the OSD menu.
•	Press this button to enter/select the icon (function) highlighted whil\
e the 
OSD is activated. 
4.	 Button:
•	Press this button to increase the value of the function selected or move\
 
right/up to the next function.
•	This is also a hot key for Brightness adjustment.
5.  Power Button:
•	Press this button to turn the monitor on/off.
  
						

							1-4Chapter 1: Product Introduction
6. Power Indicator
•	The color definition of the power indicator is as the below table.
StatusDescription
  BlueON
  AmberStandby mode
  OFFOFF
1.4.1.2 VW197N/VW197NR/VW197D/VW197DR
56
1.  Button:
•	Automatically	adjust	the	image	to	its	optimized	position,	clock,	and	
phase	by	long	pressing	this	button	for	2-4	seconds	(for	VGA	mode	only).
•	Use this hot key to switch from six video preset modes (Scenery Mode, 
Standard Mode, Theater Mode, Game Mode, Night View Mode, and 
sRGB Mode) with SPLENDID™ Video Intelligence Technology.
•	Exit the OSD menu or go back to the previous menu as the OSD menu 
is active.
2.   Button:
•	Press this button to decrease the value of the function selected or move\
 
to the next function.
•	This is also a hot key for Contrast adjustment.
3. MENU Button:
•	Press this button to enter the OSD menu.
•	Press this button to enter/select the icon (function) highlighted whil\
e the 
OSD is activated. 
4.	 Button:
•	Press this button to increase the value of the function selected or move\
 
right/up to the next function.
•	This is also a hot key for Brightness adjustment.