Asus Vw196sl User Guide

2-
2.1	 Adjusting	 the 	 monitor
•  For optimal viewing, we recommend that you look at the full face of the monitor, 
then adjust the monitor to the angle that is most comfortable for you.
•  Hold the stand to prevent the monitor from falling when you change its angle.
• 
 
-5º~15º 
100mm
45º        
0º
You can tilt the monitor’s from -5º to 15º, swivel from left-to-right for 45º each side,  
and lift the monitor’s height for about 100
 mm.
45º        
ASUS LCD Monitor VW196(x)L  Series
 

2-2Chapter 2: Setup
2.2	 Detaching 	 the 	 arm/stand 		
	 (for	 VESA 	 wall 	 mount)

The  detachable  stand  of the VW196(x)L   Series  LCD  monitor  is  specially 
designed  for V
ESA wall mount. 
•   We  recommend  that  you  cover  the  table  surface  with  soft  cloth  to  prevent damage to the monitor. 
•  Hold the stand of the monitor when you remove the screws. 
To detach the arm/stand: 
2.  Have the front of the monitor face down on a table.
3.  Use a screwdriver to remove the two screws on...

3-

3.1	 OSD	 (On-Screen 	 Display) 	 menu 	
3.1.1	 How	 to 	 reconfigure
. Press the MENU button to activate  
the OSD menu. 
                   
          
2.  Press  and  to navigate through the functions. Highlight and activate 
the desired function by pressing the MENU button. If the function select\
ed 
has a sub-menu, press + and - again to navigate through the sub-menu 
functions. Highlight and activate the desired sub-menu function by press\
ing 
the MENU button.  
3.  Press  and  to...

3-2Chapter 3: General Instruction  

2.	 Image 	
 You can adjust brightness, contrast,  
sharpness, saturation,position (VGA  
only), and focus (VGA only) from  
this main function. 
 
 •  
 Brightness: the adjusting range is from 0 to   00.   is a hotkey to    
 activate this function.
 •   Contrast: the adjusting range is from 0 to   00.
 •   Sharpness: the adjusting range is from 0 to   00.
 •   Saturation: the adjusting range is from 0 to 00. 
Swith ON or OFF THE ASCR function....

3-3

5.	 System 	 Setup 	
 Allow you to adjust the system.
 •  
 Volume: the adjusting range is from 0 to   00.  is a hotkey to activate  
 this function. 
 •   OSD Setup: adjusts the horizontal postition (H-Position) and     
 the vertical position (V-Position) of the OSD. The adjusting range is     
 from 0 to   00. In the OSD Timeout selection, you can adjust the     
 OSD timeout from   0 to   20.For DDC/CI setting, you can switch ON or OFF. 
 •   Language: there are ten...

3.2   Specifications summary
ModelVW196TL/NL/SL/DL/TGL/NGL
Panel Si ze
19 W(48.1cm)
Max.esolution
WXGA+ 1440x900
Brightness( Ty p .)
250
Cntrast Ration( Ty p .)
50000:1
Vi ewing Angle(H/V),CR
10
170/160
Displ ay Colors
16.7M
Response  Time
5ms (Tr+Tf)
Analog input Yes
Digital input DVI(VW196TL/NL/TGL   only)
Spea ker(Built-in)
1Wx2(VW196TL/SL/TGL  only)

Tilt +15° ~ -5°
VESA  wallmount
100 x 100mm
P hysical Dimension(WxHxD)
444×448.46×214mm
B ox Dimension(WxHxD)
602×368×210mm
Net  W eight(Esti.)...

3-5

3.3   Troubleshooting (FAQ)
ProblemPossible 	 Solution

Power  LED is not ON•  Press the  button to check if the monitor      is in the ON mode. •  Check if the power cord is properly     connected to the monitor and the power    outlet. 
The power LED lights amber and there is no screen image •  Check if the monitor and the computer are    in the ON mode. •  Make sure the signal cable is properly       connected the monitor and the computer. •  Inspect the signal cable and make sure      none of...

3.4   Supported operating modes
StandardResolution Frequency Hor
izontal 
F requency (KHz) Pix
el (MHz)
V GA 640x480@60Hz
31.46925.175
640x480@72Hz 37.86131.5
640x480@75Hz 37.50031.5
SV GA 800x600@56Hz
35.15636
800x600@60Hz 37.87940
800x600@72Hz 48.07750
800x600@75Hz 46.87549.5
XGA 1024x768@60Hz
48.36365
1024x768@70Hz 56.47675
1024x768@75Hz 60.02378.75
SXGA 1152x864@75Hz
67.5108
1280x960@60Hz 60108
1280x1024@60Hz 63.981108
1280x1024@75Hz 79.976135
WXGA+ 1440x900@60Hz
55.935106.5
1440x900@75Hz...