Asus Vw193d User Guide

2-ASUS LCD Monitor VW 93 Series
2.1	 Adjusting	 the 	 monitor
•  For optimal viewing, we recommend that you look at the full face of the monitor, 
then adjust the monitor to the angle that is most comfortable for you.
•  Hold the stand to prevent the monitor from falling when you change its angle.
•  You can adjust the monitor’s angle from  -5º to 20º.
 
  -5º~20º
 

2-2Chapter 2: Setup
2.2	 Detaching 	 the 	 arm/stand 		
	 (for	 VESA 	 wall 	 mount)
The  detachable  stand  of  the  VW  93  Series  LCD  monitor  is  specially  designed  for 
VESA wall mount. 
To detach the arm/stand: 
.   Remove the arm cover.
2.  Have the front of the monitor face down on a table. 
3.  Use a screwdriver to remove the three screws on the stand of the monitor as 
the below drawing shows.
4.  Detach the arm from the monitor. 
•  We  recommend  that  you  cover  the  table...

3-ASUS LCD Monitor VW 93 Series
3.1	 OSD	 (On-Screen 	 Display) 	 menu 	
3.1.1	 How	 to 	 reconfigure
.   Press the MENU button to activate  
the OSD menu. 
                   
          
2.  Press  and  to navigate through the functions. Highlight and activate 
the desired function by pressing the MENU button. If the function select\
ed 
has a sub-menu, press + and - again to navigate through the sub-menu 
functions. Highlight and activate the desired sub-menu function by press\
ing 
the...

3-2Chapter 3: General Instruction  

2.	 Image 	
 You can adjust brightness, contrast,  
sharpness, saturation,position (VGA  
only), and focus (VGA only) from  
this main function. 
 
 •   Brightness: the adjusting range is from 0 to   00.   is a hotkey to    
 activate this function.
 •   Contrast: the adjusting range is from 0 to   00.
 •   Sharpness: the adjusting range is from 0 to   00.
 •   Saturation: the adjusting range is from 0 to   00. 
 •   Position: adjusts the...

3-3ASUS LCD Monitor VW  93 Series

5.	 System	 Setup 	
 Allow you to adjust the system.
 •   Volume: the adjusting range is from 0 to   00.  is a hotkey to activate  
 this function. 
 •   OSD Setup: adjusts the horizontal postition (H-Position) and     
 the vertical position (V-Position) of the OSD. The adjusting range is     
 from 0 to   00. In the OSD Timeout selection, you can adjust the     
 OSD timeout from   0 to   20.
 •   Language: there are ten languages for your...

3-4Chapter 3: General Instruction  

3.2	Specifications summary

*Specifications
	are
	subject
	to
	change
	without
	notice.

Panel Type  TFT LCD 
Panel size 19 wide screen 
Max. Resolution WXGA+ 1440 x 900 
Brightness (Typ.) 300 cd/m2 
Contrast Ratio (Typ.) 800:1 / 850:1 (VW193D only) 
Viewing angle(H/V) CR ≥ 10  160º/160º; 170º/160º (VW193D only) 
Display colors  16.7M /16.2M (VW193D only) 
Response time 5ms (Tr+Tf) 
SPLENDID™ Video Enhancement Ye s   
SPLENDID™ selection 5 video preset modes (by...

3-5ASUS LCD Monitor VW  93 Series

3.3  Troubleshooting (FAQ)
ProblemPossible 	 Solution
Power  LED is not ON•  Press the  button to check if the monitor      is in the ON mode. •  Check if the power cord is properly     connected to the monitor and the power    outlet. 
The power LED lights amber and there is no screen image •  Check if the monitor and the computer are    in the ON mode. •  Make sure the signal cable is properly       connected the monitor and the computer. •  Inspect the signal...

3-6Chapter 3: General Instruction  
3.4   Supported operating modes
ModeResolution 	FrequencyHorizontal	FrequencyVertical	FrequencyPixel
VGA
640 x 4803 .469KHz60Hz25.  75MHz640 x 48037.86  KHz72Hz3 .50MHz640 x 48037.50KHz75Hz3 .50MHz
SVGA
800 x 60035.  56KHz56Hz36.00MHz800 x 60037.879KHz60Hz40.00MHz800 x 60048.077KHz72Hz50.00MHz800 x 60046.875KHz75Hz49.50MHz
XGA
024 x 76848.363KHz60Hz65.00MHz024 x 76856.476KHz70Hz75.00MHz024 x 76857.70KHz72Hz78.40MHz024...