Asus Vw192t User Guide

							2-1 2-12-1 2-1
2-1
ASUS LCD Monitor VW192 Series ASUS LCD Monitor VW192 SeriesASUS LCD Monitor VW192 Series ASUS LCD Monitor VW192 Series
ASUS LCD Monitor VW192 Series
2.1 Adjusting the monitor
• For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable
for you.
• Hold the stand to prevent the monitor from falling when you change its
angle.
• You can adjust the monitor’s angle from  -5º to 20º.
      -5º~20º
 
						

							2-2 2-22-2 2-2
2-2
Chapter 2: Setup Chapter 2: SetupChapter 2: Setup Chapter 2: Setup
Chapter 2: Setup
2.2 Detaching the arm/stand
(for VESA wall mount)
The detachable stand of the VW192 Series LCD monitor is specially
designed for VESA wall mount.
To detach the arm/stand:
1. Remove the rear cover.
2. Have the front of the monitor face down on a table.
3. Use a screwdriver to remove the two screws on the stand of the
monitor as the below drawing shows.
4. Two other screws show after you remove the screws on the stand.
Repeat step 3.
• We recommend that you cover the table surface with soft cloth to
prevent damage to the monitor.
• Hold the stand of the monitor when you remove the screws.
The VESA wall mount kit (100 mm x 100 mm) is purchased separately.
screws screwsscrews screws
screws
Rear RearRear Rear
Rear
cover covercover cover
cover
 
						

							3-1 3-13-1 3-1
3-1
ASUS LCD Monitor VW192 Series ASUS LCD Monitor VW192 SeriesASUS LCD Monitor VW192 Series ASUS LCD Monitor VW192 Series
ASUS LCD Monitor VW192 Series
3.1 OSD (On-Screen Display) menu
3.1.1 3.1.13.1.1 3.1.1
3.1.1
How to reconfigure How to reconfigureHow to reconfigure How to reconfigure
How to reconfigure
1. Press the MENU button to activate
the OSD menu.
2. Press 
 and to navigate through the functions. Highlight and
activate the desired function by pressing the MENU button. If the
function selected has a sub-menu, press + and - again to navigate
through the sub-menu functions. Highlight and activate the desired
sub-menu function by pressing the MENU button.
3. Press 
 and to change the settings of the selected function.
4. To exit the OSD menu, press the SPLENDID button. Repeat step 2 and
step 3 to adjust any other function.
3.1.2 3.1.23.1.2 3.1.2
3.1.2
OSD Function Introduction OSD Function IntroductionOSD Function Introduction OSD Function Introduction
OSD Function Introduction
1.
Spendid SpendidSpendid Spendid
Spendid
This function contains five
sub-functions you can select
for your preference.
•
Scenery Mode: Scenery Mode:Scenery Mode: Scenery Mode:
Scenery Mode: advance for scenery use with SPLENDID™ Video
Enhancement.
•
Standard Mode: Standard Mode:Standard Mode: Standard Mode:
Standard Mode: advance for general Window use with
SPLENDID™ Video Enhancement.
•
Theater Mode: Theater Mode:Theater Mode: Theater Mode:
Theater Mode: advance for movie use with SPLENDID™ Video
Enhancement.
•
Game Mode:  Game Mode: Game Mode:  Game Mode: 
Game Mode: advance for game use with SPLENDID™ Video
Enhancement.
•
Night View Mode Night View ModeNight View Mode Night View Mode
Night View Mode: advance for dark-display use with SPLENDID™
Video Enhancement.
 
						

							3-2 3-23-2 3-2
3-2
Chapter 3: General Instruction Chapter 3: General InstructionChapter 3: General Instruction Chapter 3: General Instruction
Chapter 3: General Instruction
2.
Image ImageImage Image
Image
You can adjust brightness, contrast,
sharpness, saturation,position (VGA
only), and focus (VGA only) from
this main function.
•
Brightness:  Brightness: Brightness:  Brightness: 
Brightness: the adjusting range is from 0 to 100. 
is a
hotkey to activate this function.
•
Contrast:  Contrast: Contrast:  Contrast: 
Contrast: the adjusting range is from 0 to 100.
•
Sharpness:  Sharpness: Sharpness:  Sharpness: 
Sharpness: the adjusting range is from 0 to 100.
•
Saturation:  Saturation: Saturation:  Saturation: 
Saturation: the adjusting range is from 0 to 100.
•
Position: Position:Position: Position:
Position: adjusts the horizontal postition (H-Position) and the
vertical position (V-Position) of the image. The adjusting range is
from 0 to 100.
•
Focus:  Focus: Focus:  Focus: 
Focus: reduces Horizonal-line noise and Vertical-line noise of the
image by adjusting (Phase) and (Clock) separately. The adjusting
range is from 0 to 100.
• Phase adjusts the phase of the pixel clock signal. With a wrong
phase adjustment, the screen shows  horizontal disturbances.
• Clock (pixel frequency) controls the number of pixels scanned by
one horizontal sweep. If the frequency is not correct, the screen
shows vertical stripes and the image is not proportional.
3.
Color ColorColor Color
Color
Select the image color you like
from this function.
•
Color Temp.: Color Temp.:Color Temp.: Color Temp.:
Color Temp.: contains five color modes including Cool, Normal,
Warm, sRGB, and User mode.
•
Skin Tone: Skin Tone:Skin Tone: Skin Tone:
Skin Tone: contains three color modes including Reddish, Natural,
and Yellowish.
In the User mode, colors of R (Red), G (Green), and B (Bluee) are user-
configurable; the adjusting range is from 0-100.
 
						

							3-3 3-33-3 3-3
3-3
ASUS LCD Monitor VW192 Series ASUS LCD Monitor VW192 SeriesASUS LCD Monitor VW192 Series ASUS LCD Monitor VW192 Series
ASUS LCD Monitor VW192 Series
4. I
nput Select nput Selectnput Select nput Select
nput Select
In this function, you can select
either VGA or DVI input source.
(For the models with a DVI port)
5.
System Setup System SetupSystem Setup System Setup
System Setup
Allow you to adjust the system.
•
Volume: Volume:Volume: Volume:
Volume: the adjusting range is from 0 to 100. 
 is a hotkey to
activate this function.
•
OSD Setup:  OSD Setup: OSD Setup:  OSD Setup: 
OSD Setup: adjusts the horizontal postition (H-Position) and
the vertical position (V-Position) of the OSD. The adjusting range is
from 0 to 100. In the OSD Timeout selection, you can adjust the
OSD timeout from 10 to 120.
•
Language: Language:Language: Language:
Language: there are ten languages for your selection, including
English, German, Italian, French, Dutch, Spanish, Russian, Traditional
Chinese, Simplified Chinese, and Japanese.
•
Information: Information:Information: Information:
Information: shows the monitor information.
•
Reset: Reset:Reset: Reset:
Reset: “Yes” allows you to revert to the preset mode.
 
						

							3-4 3-43-4 3-4
3-4
Chapter 3: General Instruction Chapter 3: General InstructionChapter 3: General Instruction Chapter 3: General Instruction
Chapter 3: General Instruction
3.2 Troubleshooting (FAQ)
    Problem     Problem    Problem     Problem
    Problem
Power  LED is not ON
The Power LED lights
amber and there is
no screen image
Screen image is too
light or dark
Screen image is not
centered or sized
properly
Screen image
bounces or a wave
pattern is present in
the image
Screen image has
color defects (white
does not look white)
Screen image is
blurry or fuzzy
No sound or sound is
low
                               
Possible Solution Possible SolutionPossible Solution Possible Solution
Possible Solution
•  Press the      button to check if the monitor is in the ON
    mode.
•  Check if the power cord is properly connected to the
    monitor and the power outlet.
•  Check if the monitor and the computer are in the ON mode.
•  Make sure the signal cable is properly connected the
    monitor and the computer.
•  Inspect the signal cable and make sure none of the pins are
    bent.
•  Connect the computer with another available monitor to
    check if the computer is properly working.
•  Adjust the Contrast and Brightness settings via OSD.
•  Press the SPLENDID button for two seconds to
    automatically adjust the image.
•  Adjust the H-Position or V-Position settings via OSD.
•  Make sure the signal cable is properly connected to the
    monitor and the computer.
•  Move electrical devices that may cause electrical
    interference.
•  Inspect the signal cable and make sure that none of the
    pins are bent.
•  Perform Reset via OSD.
•  Adjust the R/G/B color settings or select the Color
    Temperature via OSD.
•  Press the SPLENDID button for two seconds to
    automatically adjust the image.
•  Adjust the Phase and Clock settings via OSD.
•  Ensure that the audio cable is properly connected to the
    monitor and the computer
•  Adjust the volume settings of both your monitor and
    computer.
•  Ensure that the computer sound card driver is properly
    installed and activated.
 
						

							3-5 3-53-5 3-5
3-5
ASUS LCD Monitor VW192 Series ASUS LCD Monitor VW192 SeriesASUS LCD Monitor VW192 Series ASUS LCD Monitor VW192 Series
ASUS LCD Monitor VW192 Series
3.3 Supported operating modes
Standard    Resolution      Horizontal         Vertical          Pixel Standard    Resolution      Horizontal         Vertical          PixelStandard    Resolution      Horizontal         Vertical          Pixel Standard    Resolution      Horizontal         Vertical          Pixel
Standard    Resolution      Horizontal         Vertical          Pixel
                                  Frequency          Frequency       Frequency                                   Frequency          Frequency       Frequency                                  Frequency          Frequency       Frequency                                   Frequency          Frequency       Frequency
                                  Frequency          Frequency       Frequency
 720 x 400                31.47KHz  70Hz                   28.32MHz
 640 x 480                31.47KHz  60Hz 25.18MHz
 640 x 480     37.90KHz  72Hz 31.50MHz
 640 x 480     37.50KHz  75Hz 31.50MHz
 800 x 600     35.16KHz  56Hz 36.00MHz
 800 x 600     37.90KHz  60Hz 40.00MHz
 800 x 600     48.10KHz  72Hz 50.00MHz
 800 x 600     46.90KHz  75Hz 49.50MHz
 1024 x 768     48.40KHz  60Hz 65.00MHz
 1024 x 768     56.50KHz  70Hz 75.00MHz
 1024 x 768     60.02KHz  75Hz 78.75MHz
 1280 x 1024     64.00KHz  60Hz 108.00MHz
 1280 x 1024     80.00KHz  75Hz 135.00MHz
 1152 x 864     67.50KHz  75Hz 108.00MHz
 1440 x 900     55.94KHz  60Hz 106.00MHz
DOS
VGA
SVGA
XGA
SXGA
VESA
VESA
(Primary)
* Modes not listed in the table may not be supported. For optimal
   resolution, we recommend that you choose a mode listed in the table
   above.
 
						

							3-6 3-63-6 3-6
3-6
Chapter 3: General Instruction Chapter 3: General InstructionChapter 3: General Instruction Chapter 3: General Instruction
Chapter 3: General Instruction