Asus Vw190de User Guide

							1-5ASUS	LCD	Monitor	VW190	Series
4. 	Button:
•	Press this button to increase the value of the function selected or move\
 
right/up	to	the	next	function.
•	This	is	also	a	hotkey	for	Brightness	adjustment.
5. 	Power	Button:
•	Press	this	button	to	turn	the	monitor	on/off.
6. Power Indicator
•	The color definition of the power indicator is as the below table.
StatusDescription
  BlueON
  AmberStandby mode
  OFFOFF
1.4.2  Rear of the LCD monitor
Screw Holes for
VESA Wall Mount
1234Rear connectors
1AC-IN port
2Audio Line-in port (VW190T/S/TE/SE)
3DVI port (VW190T/N/TE/NE)
4VGA port
  
						

							2-1Chapter	2:	Setup
2.1   Detaching the arm/stand 
(for VESA wall mount)
The	detachable	stand	of	the	VW190	Series	LCD	monitor	is	specially	designed	for	
VESA	wall	mount.
To detach the arm/stand:
1. Have the front of the monitor face down on a table.
2. Press the plastic release button on the rear of the monitor shows as bel\
ow 
picture.
3. Detach the stand from the monitor.
•		
We	recommend	that	you	cover	the	table	surface	with	soft	cloth	to	prevent	
damage	to	the	monitor.
•	The	VESA	wall	mount	kit	(	100	x	100	mm)	is	purchased	separately.
  
						

							2-2ASUS	LCD	Monitor	VW190	Series
2.2 Adjusting the monitor
•		For	optimal	viewing,	we	recommend	that	you	look	at	the	full	face	of	the	
monitor,	then	adjust	the	monitor	to	the	angle	that	is	most	comfortable	for	you.
•		Hold	the	stand	to	prevent	the	monitor	from	falling	while	changing	its	angle.
•		You	can	adjust	the	monitor’s	angle	from	-5˚	to	20˚.
-5 ~ 20
  
						

							3-1Chapter	3:	General	Instruction
3.1 OSD (On-Screen Display) menu
3.1.1	 How	to	reconfigure
VW190
Splendid
Color
Image
Input Select
MoveMenuExit
System Setup
Scenery Mode
Standard Mode
Theater Mode
Game Mode
Night View Mode
sRGB
1. Press	the	MENU	button	to	activate	the	OSD	menu.
2. Press  and 	to	navigate	through	the	functions.	Highlight	and	activate	
the	desired	function	by	pressing	the	MENU	button.	If	the	function	selected	
has	a	sub-menu,	press	 and 	again	to	navigate	through	the	sub-menu	
functions.	Highlight	and	activate	the	desired	sub-menu	function	by	pressing	
the	MENU	button.
3. Press  and 	to	change	the	settings	of	the	selected	function.
4. To	exit	the	OSD	menu,	press	the	 button. Repeat step 2 and step 3 to 
adjust any other function.
3.1.2 
OSD Function Introduction
1. Splendid
This	function	contains	six	sub-functions	that	you	can	select	for	your	
preference.	Each	mode	has	the	Reset	selection,	allowing	you	to	maintain	
your	setting	or	return	to	the	preset	mode.
VW190
Splendid
Color
Image
Input Select
MoveMenuExit
System Setup
Scenery Mode
Standard Mode
Theater Mode
Game Mode
Night View Mode
sRGB
  
						

							3-2ASUS	LCD	Monitor	VW190	Series
•	Scenery Mode:	This	is	the	best	choice	for	scenery	photo	displaying	with	
SPLENDID™	Video	Intelligence	Technology.
•	Standard Mode:	This	is	the	best	choice	for	document	editing	with	
SPLENDID™	Video	Intelligence	Technology.
•	Theater Mode:	This	is	the	best	choice	for	movie	watching	with	
SPLENDID™	Video	Intelligence	Technology.
•	Game Mode:	This	is	the	best	choice	for	game	playing	with	SPLENDID™	
Video	Intelligence	Technology.
•	Night View Mode:	This	is	the	best	choice	for	playing	dark-scene	game	
or	watching	dark-scene	movie	with	SPLENDID™	Video	Intelligence	
Technology.
•	In the Standard Mode,	the	Saturation,	Skin Tone,	Sharpness,	ASCR are 
not	user-configurable.
•	 In the sRGB,	the	Brightness,	Contrast,	Saturation,	Color Temp,	Skin 
Tone and ASCR	are	not	user-configurable.
2.  Color
Select	the	image	color	you	like	from	this	function.
VW190
Splendid
Color
Image
Input Select
MoveMenuExit
System Setup
Brightness
Contrast
Saturation
Color Temp
100
80
User Mode
Skin Tone
Smart View
50
Natural OFF
•	Brightness:	The	adjusting	range	is	from	0	to	100.	
•	Contrast:	The	adjusting	range	is	from	0	to	100.
•	Saturation:	The	adjusting	range	is	from	0	to	100.
•	Color Temp.:	Contains	three	preset	color	modes	(Cool,	Normal,	Warm)	
and	one	User	Mode.
•	Skin Tone:	Contains	three	color	modes	including	Reddish,	Natural,	and	
Yellowish.
•	Smart View:	Turns	the	Smart	View	Function	on	or	off.
In	the	User	Mode,	colors	of	R	(Red),	G	(Green),	and	B	(Blue)	are	
userconfigurable;	the	adjusting	range	is	from	0	~	100.
  
						

							3-3Chapter	3:	General	Instruction
3. Image
You	can	adjust	the	image	Sharpness,	Aspect	Control,	ASCR,	Position	(VGA	
only),	and	Focus	(VGA	only)	from	this	main	function.
VW190
Splendid
Color
Image
Input Select
MoveMenuExit
System Setup
Focus Sharpness
Aspect Control
ASCR 40
1366x768
OFF
Position
•	Sharpness:	Asjusts	the	picture	sharpness.	The	adjusting	range	is	from	0	
to 100.
•	Aspect Control:	Adjusting	the	aspect	ratio	to	“1366x768”,	“1360x768”	or	
“4:3”.
•	ASCR:	Select	YES	or	NO	to	enable	or	disable	dynamic	contrast	ratio	
function.
•	Position:	Adjusts	the	horizontal	postition	(H-Position)	and	the	vertical	
position	(V-Position)	of	the	image.	The	adjusting	range	is	from	0	to	100	
(Only	available	for	VGA	input).
•	Focus:	Reduces	Horizonal-line	noise	and	Vertical-line	noise	of	the	image	
by	adjusting	(Phase)	and	(Clock)	separately.	The	adjusting	range	is	from	
0	to	100	(Only	available	for	VGA	input).
4.  Input Select
Selects	the	input	source	from	VGA	or	DVI	(VW190T/N/TE/NE).
VW190
Splendid
Color
Image
Input Select
MoveMenuExit
System Setup
VGA
DVI
  
						

							3-4ASUS	LCD	Monitor	VW190	Series
5. System Setup
Adjusts	the	system	configuration.
VW190
Splendid
Color
Image
Input Select
MoveMenuExit
System Setup
Language
Information Splendid Demo Mode OFF
83
OFF
English
Volume
ECO Mode
OSD Setup
1/2
VW190
Splendid
Color
Image
Input Select
MoveMenuExit
System Setup
All Reset
2/2
•	Splendid Demo Mode: Activate the demo mode for the Splendid 
function.
•	Volume: Adjusts	the	Volume	level	of	speakers.	(VW190T/S/TE/SE).
•	ECO Mode: Turns the ECO Mode Function on or off.
•	OSD Setup:	Adjusts	the	horizontal	position	(H-Position),	vertical	position	
(V-Position),	OSD	Timeout,	DDD/CI,	and	Transparency	of	the	OSD	
screen. 
•	Language:	Selects	OSD	language.	The	selections	are	English,	French,	
German,	Spanish,	Italian,	Dutch,	Russian,	Traditional	Chinese,	Simplified	
Chinese,	Japanese	and	Korean.
•	Information: Displays the monitor information.
•	All Reset: Selects	“Yes”	to	revert	all	settings	to	the	factory	default	mode.
  
						

							3-5Chapter	3:	General	Instruction
3.2	 Specifications
ModelVW190TE/NE/
SE/DEVW190T/N/S/D
Panel	Size18.5”W	(47.0cm)18.5”W	(47.0cm)
Max.	Resolution1366x7681366x768
Brightness	(Typ.)200cd/㎡250cd/㎡
Intrisinc Contrast Ratio 600:11000:1
Viewing	Angle	(H/V),	(CR≥10)90°/	50°170°/160°
Display Colors16.7	M16.7	M
Response Time5ms	(Tr+Tf)5ms	(Tr+Tf)
Analog	InputD-SubD-Sub
Digital	InputDVI(VW190TE/NE	only)DVI(VW190T/N	only)
Speaker	(Build-in)1W	x	2	(VW190TE/SE	only)1W	x	2	(VW190T/	S	only)
Tilt-5°	~	+20°-5°	~	+20°
VESA	Wall	MountingYes	(100mm	x	100mm)Yes	(100mm	x	100mm)
Phys.	Dimension	(WxHxD)445x370x185mm445x370x185mm
Box	Dimension	(WxHxD)507x322x150mm507x322x150mm
Net	Weight	(Esti.)2.9	kg2.9	kg
Gross	Weight	(Esti.)4.7	kg4.7	kg
Voltage	RatingAC	100~240V(Built-in)AC	100~240V(Built-in)
  
						

							3-6ASUS	LCD	Monitor	VW190	Series
3.3 Troubleshooting (FAQ)
ProblemPossible Solution
Power		LED	is	not	ON•	Press the  button to check if the monitor is in the ON	mode.•	Check if the power cord is properly connected to the monitor and the power outlet.
The	power	LED	lights	amber	and	there	is	no	screen	image•	Check if the monitor and the computer are in the ON	mode.•	Make	sure	the	signal	cable	is	properly	connected	the monitor and the computer.•	Inspect	the	signal	cable	and	make	sure	none	of	the	pins are bent.•	Connect the computer with another available monitor	to	check	if	the	computer	is	properly	working.
Screen	image	is	too	light	or	dark•	Adjust	the	Contrast	and	Brightness	settings	via	OSD.
Screen	image	is	not	centered	or	sized	properly•	Press the  button for two seconds to automatically	adjust	the	image	(for	VGA	input	only).•	Adjust	the	H-Position	or	V-Position	settings	via	OSD	(for	VGA	input	only).
Screen	image	bounces	or	a	wave	pattern	is	present	in	the	image•	Make	sure	the	signal	cable	is	properly	connected	to	the monitor and the computer.•	Move electrical devices that may cause electrical interference.
Screen	image	has	color	defects	(white	does	not	look	white)•	Inspect	the	signal	cable	and	make	sure	that	none	of	the pins are bent.•	Perform All Reset via OSD.•	Adjust	the	R/G/B	color	settings	or	select	the	Color	Temperature via OSD.
Screen	image	is	blurry	or	fuzzy•	Press the  button for two seconds to automatically	adjust	the	image		(for	VGA	input	only).•	Adjust	the	Phase	and	Clock	settings	via	OSD.
No	sound	or	sound	is	low	(VW190T/S/TE/SE)•	Ensure that the audio cable is properly connected to the monitor and the computer.•	Adjust	the	volume	settings	of	both	your	monitor	and	computer.•	Ensure that the computer sound card driver is properly installed and activated.
  
						

							3-7Chapter	3:	General	Instruction
3.4 Supported timing list
PC Supported Primary Timing
ModeResolutionH(KHz)V(Hz)Pixel (MHz)
VGA
640x48031.4696025.175
640x48037.8617231.5
640x48037.57531.5
SVGA
800x60035.1565636
800x60037.8796040
800x60048.0777250
800x60046.8757549.5
XGA
1024x76848.3636065
1024x76856.4767075
1024x76860.0237578.75
WXGA+1366x76847.7126085.5
IBM Modes, Factory Preset Timing
ModeResolutionH(KHz)V(Hz)Pixel (MHz)
DOS640x35031.4697025.175
DOS720x40031.4697028.322
MAC Modes, Factory Preset TimingModeResolutionH(KHz)V(Hz)Pixel (MHz)VGA640x480356730.24SVGA832x62449.7257557.2832