Home > Asus > Monitor > Asus Vw171d User Guide

Asus Vw171d User Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Asus Vw171d User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 379 Asus manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							
    2-
    ASUS LCD Monitor VW98/VW193/VW171 Series
    2.1	 Adjusting	 the 	 monitor
    •  For optimal viewing, we recommend that you look at the full face of the monitor, 
    then adjust the monitor to the angle that is most comfortable for you.
    •  Hold the stand to prevent the monitor from falling when you change its angle.
    •  You can adjust the monitor’s angle from  -5º to 20º.
     
      -5º~20º
     
    						
    							
    2-2Chapter 2: Setup
    2.2	 Detaching 	 the 	 arm/stand 		
    	 (for	 VESA 	 wall 	 mount)
    
    The  detachable  stand  of  the  VW98/V193/VW171  Series  LCD  monitor  is  specially  designed  for 
    VESA wall mount. 
    To detach the arm/stand: 
    .   Remove the arm cover.
    2.  Have the front of the monitor face down on a table. 
    3.  Use a screwdriver to remove the three screws on the stand of the monitor as 
    the below drawing shows.
    4.  Detach the arm from the monitor. 
    •  We  recommend  that  you  cover  the  table  surface  with  soft  cloth  to  prevent damage to the monitor. 
    •  Hold the stand of the monitor when you remove the screws. 
    The VESA wall mount kit (  00 mm x   00 mm) is purchased separately.
    screws
     
    						
    							
    3-
    ASUS LCD Monitor VW 98/VW193/VW171 Series
    3.1	 OSD	 (On-Screen 	 Display) 	 menu 	
    3.1.1	 How	 to 	 reconfigure
    .   Press the MENU button to activate  
    the OSD menu. 
                       
              
    2.  Press  and  to navigate through the functions. Highlight and activate 
    the desired function by pressing the MENU button. If the function select\
    ed 
    has a sub-menu, press + and - again to navigate through the sub-menu 
    functions. Highlight and activate the desired sub-menu function by press\
    ing 
    the MENU button.  
    3.  Press  and  to change the settings of the selected function.
    4.  To exit the OSD menu, press the  button. Repeat step 2 and step 3 to 
    adjust any other function.   
    3.1.2	 OSD 	 Function 	 Introduction
    1.	 Spendid
     This function contains five  
    sub-functions you can select  
    for your preference. Each mode has the 
    Reset selection, allowing you to maintain 
    your setting or return to the preset mode.
     •  Scenery 	 Mode: best choice for scenery photo display with SPLENDID™   
     Video Enhancement.
     •    Standard 	 Mode: best choice for document editing with SPLENDID™    
     Video Enhancement.
     •    Theater 	 Mode: best choice for movie with SPLENDID™ Video     
     Enhancement.
     •    Game 	 Mode: best choice for game playing with SPLENDID™ Video 
     Enhancement.
     •    Night	 View 	 Mode: best choice for dark-scene game or movie with  
     SPLENDID™ Video Enhancement.  
    •  In the Standard Mode, the Satuation and Sharpness functions are not user-configurable.
    •  In the other modes, the sRGB function is not user-configurable.
     
    						
    							
    3-2Chapter 3: General Instruction  
    
    2.	 Image 	
     You can adjust brightness, contrast,  
    sharpness, saturation,position (VGA  
    only), and focus (VGA only) from  
    this main function. 
     
     •   Brightness: the adjusting range is from 0 to   00.   is a hotkey to    
     activate this function.
     •   Contrast: the adjusting range is from 0 to   00.
     •   Sharpness: the adjusting range is from 0 to   00.
     •   Saturation: the adjusting range is from 0 to   00. 
     •   Position: adjusts the horizontal postition (H-Position) and the vertical     
     position (V-Position) of the image. The adjusting range is from 0 to   00.   
    •  Focus: reduces Horizonal-line noise and Vertical-line noise of the image   
     by adjusting (Phase) and (Clock) separately. The adjusting range is from   
     0 to   00.      
    •  Phase adjusts the phase of the pixel clock signal. With a wrong phase adjustment, the screen shows  horizontal disturbances.
    •  Clock (pixel frequency) controls the number of pixels scanned by one horizontal sweep. If the frequency is not correct, the screen shows vert\
    ical stripes and the image is not proportional.
    3.	 Color 		
     Select the image color you like 
     from this function. 
     
      
    •  Color Temp.: contains five color modes including Cool, Normal,     
     Warm, sRGB, and User mode.      
     •   Skin Tone: contains three color modes including Reddish, Natural,     
     and Yellowish. 
    In the User mode, colors of R (Red), G (Green), and B (Bluee) are \
    user-configurable; the adjusting range is from 0-  00.
     
    						
    							
    3-3
    ASUS LCD Monitor VW  98/VW193/VW171 Series
    5.	 System	 Setup 	
     Allow you to adjust the system.
     •   Volume: the adjusting range is from 0 to   00.  is a hotkey to activate  
     this function. 
     •   OSD Setup: adjusts the horizontal postition (H-Position) and     
     the vertical position (V-Position) of the OSD. The adjusting range is     
     from 0 to   00. In the OSD Timeout selection, you can adjust the     
     OSD timeout from   0 to   20.
     •   Language: there are ten languages for your selection,       
     including English, German, Italian, French, Dutch, Spanish, Russian,     
     Traditional Chinese, Simplified Chinese, Japanese, and Korean. 
     •   Aspect Controls: adjusts the aspect ratio to “Full” or “4:3”\
    . 
     •   Information: shows the monitor information. 
     •   Reset: “Yes” allows you to revert to the preset mode. 
    4.	 Input 	 Select 	
     In this function, you can select  
    either VGA or DVI input source. 
    (Only for some models)
     
    						
    							
    3-
    4
    Chapter 3: General Instruction  
    
    3.2	
    Specifications summary
    
    *Specifications
    	are
    	subject
    	to
    	change
    	without
    	notice.
    
    ModelVW198T/S/DVW193TR/DR/NR/SRVW171T/S/D
    Panel Size19Wide 19Wide17Wide
    Max. ResolutionWSXGA+ 1680x1050 WXGA+ 1440x900WXGA+ 1440x900
    Brightness (Typ.)300 300250
    Contrast Ratio (Typ.)1000:1 600:1
    Viewing Angle (H/V), CR≧10160/160160(170)/160 160/150
    Display Colors16.7M16.7M16.2M
    Response Time5ms (Tr+Tf) 5ms (Tr+Tf)8ms (Tr+Tf)
    Analog input Yes YesYes
    Digital inputDVI(VW198T only)DVI(VW193TR/NR only)--
    Speaker(Built-in) 1W x 2 (VW198T and VW198S only)1W x 2 (VW193TR/VW193SR only)1W x 2 (VW171S only)
    Tilt+20° ~ -5° +20° ~ -5°+20° ~ -5°
    VESA wall mount 100 x 100mm 100 x 100mm100 x 100mm
    Physical Dimension (WxHxD)   444x364x210mm 444x364x210mm408x341x210mm
    Box Dimension (WxHxD) 513x425x155mm 513x425x155mm469x412x150mm
    Net Weight (Esti.)   4.3kg 4.3kg3.3kg
    Gross Weight (Esti.)5.8kg 5.8kg5.3kg
    Voltage ratingAC: 100~240V
    (Built-in) AC: 100~240V
    (Built-in) AC: 100~240V
    (Built-in)
    1000:1
     
    						
    							
    3-5
    ASUS LCD Monitor VW  98/VW193/VW171 Series
    3.3  Troubleshooting (FAQ)
    ProblemPossible 	 Solution
    Power  LED is not ON•  Press the  button to check if the monitor      is in the ON mode. •  Check if the power cord is properly     connected to the monitor and the power    outlet. 
    The power LED lights amber and there is no screen image •  Check if the monitor and the computer are    in the ON mode. •  Make sure the signal cable is properly       connected the monitor and the computer. •  Inspect the signal cable and make sure      none of the pins are bent. •  Connect the computer with another     available monitor to check if the computer     is properly working.
    Screen image is too light or dark•  Adjust the Contrast and Brightness settings    via OSD.
    Screen image is not centered or sized properly•  Press the  button for two seconds to     automatically adjust the image.  •  Adjust the H-Position or V-Position settings    via OSD.
    Screen image bounces or a wave pattern is present in the image•  Make sure the signal cable is properly     connected to the monitor and the computer. •  Move electrical devices that may cause       electrical interference.
    Screen image has color defects (white does not look white)•  Inspect the signal cable and make sure that     none of the pins are bent.  •  Perform Reset via OSD. •  Adjust the R/G/B color settings or select the     Color Temperature via OSD.
    Screen image is blurry or fuzzy•  Press the  button for two seconds to      automatically adjust the image (for VGA    mode only). •  Adjust the Phase and Clock settings via     OSD.
    No sound or sound is low•  Ensure that the audio cable is properly       connected to the monitor and the computer •  Adjust the volume settings of both your     monitor and computer.  •  Ensure that the computer sound card driver     is properly installed and activated.
     
    						
    							
    3-6Chapter 3: General Instruction  
    3.4 VW198 Supported operating modes
    ModeResolution
    Frequency
    Horizontal
    Frequency
    Vertical
    FrequencyPixel
    640 x 48031,469KHz60Hz25,175MHz
    640 x 48037,861KHz72Hz31,50MHz
    640 x 48037,50KHz75Hz31,50MHz
    800 x 60035,156KHz56Hz36,00MHz
    800 x 60037,879KHz60Hz40,00MHz
    800 x 60048,077KHz72Hz50,00MHz
    800 x 60046,875KHz75Hz49,50MHz
    1024 x 76848,363KHz60Hz65,00MHz
    1024 x 76856,476KHz70Hz75,00MHz
    1024 x 76857,70KHz72Hz78,40MHz
    1024 x 76860,023KHz75Hz78,75MHz
    1152 x 86467,5KHz75Hz108,00MHz
    1280 x 96060KHz60Hz108,00MHz
    1280 x 80049,702KHz60Hz83.5MHz
    1280 x 80062,795KHz75Hz106.5MHz
    1280 x 102463,981KHz60Hz108,00MHz
    1280 x 102474,4KHz70Hz124,9MHz
    1280 x 102477,9KHz72Hz134,6MHz
    1280 x 102479,976KHz75Hz135,00MHz
    1440 x 90055,935KHz60Hz106,5MHz
    1440 x 90070,635KHz75Hz136,75MHz
    WSXGA1680 x 105065,29KHZ60Hz146.25MHZ
    ModoResolution
    Frequency
    Horizontal
    Frequency
    Vertical
    Frequency
    Pixel
    640 x 35031,469KHz70Hz25,175MHz
    720 x 40031,469KHz70Hz28,322MHz
    ModoFrecuencia de
    Resolución
    Frecuencia
    Horizontal
    Frecuencia
    VerticalPíxel
    VGA640 x 48035KHz67Hz30,24MHz
    SVGA832 x 62449,725KHz75Hz57,2832MHz
    Modos MAC
    DOS
    WXGA
    VGA
    SVGA
    XGA
    Mac
    WXGA+
    SXGA
    Modos IBM
    Notes :those modes are for VW198 series only.
     
    						
    							
    3-7Chapter 3: General Instruction  
    3.5 VW193/VW171 Supported operating modes
    ModeResolution	FrequencyHorizontal	FrequencyVertical	FrequencyPixel
    VGA
    640 x 4803 .469KHz60Hz25.  75MHz640 x 48037.86  KHz72Hz3 .50MHz640 x 48037.50KHz75Hz3 .50MHz
    SVGA
    800 x 60035.  56KHz56Hz36.00MHz800 x 60037.879KHz60Hz40.00MHz800 x 60048.077KHz72Hz50.00MHz800 x 60046.875KHz75Hz49.50MHz
    XGA
    024 x 76848.363KHz60Hz65.00MHz024 x 76856.476KHz70Hz75.00MHz024 x 76857.70KHz72Hz78.40MHz024 x 76860.023KHz75Hz78.75MHz
    Mac 52 x 86467.5KHz75Hz08.00MHz280 x 96060KHz60Hz08.00MHz
    SXGA
    280 x   02463.98 KHz60Hz08.00MHz280 x   02474.4KHz70Hz24.9MHz280 x   02477.9KHz72Hz34.6MHz280 x   02479.976KHz75Hz35.00MHz
    WXGA+440 x 900 55.935KHz60Hz06.5MHz440 x 90070.635KHz75Hz36.75MHz
    ModeResolution 	FrequencyHorizontal	FrequencyVertical	FrequencyPixel
    DOS 640 x 3503 .469KHz70Hz25.  75MHz
    720 x 4003 .469KHz70Hz28.322MHz
    ModeResolution 	FrequencyHorizontal	FrequencyVertical	FrequencyPixel
    VGA640 x 48035KHz67Hz30.24MHz
    SVGA832 x 62449.725KHz75Hz57.2832MHz
    IBM	 modes
    MAC 	 modes
    *	 Modes 	 not 	 listed 	 in 	 the 	 above 	 tables 	 may 	 not 	 be 	 supported. 	 For 	 optimal 	 resolution, 	 we 	 recommend 	that	 you 	 choose 	 a 	 mode 	 listed 	 in 	 the 	 above 	 tables
     
    						
    All Asus manuals Comments (0)

    Related Manuals for Asus Vw171d User Guide