Asus Vs248h User Guide

1-4Chapter 1: Product introduction
 

2-1
ASUS VS248 Series LED Monitor 
2.1  Assembling the monitor arm/base
To assemble the monitor base:
1.  Have the front of the monitor face down on a table.
2.  Attach the base into the arm, making sure the tab on the arm fi  ts into the groove 
on the base.
3.  Fix the base to the arm by fastening the bundled screw.
We recommend that you cover the table surface with soft cloth to prevent\
 
damage to the monitor.
2.2  Adjusting the monitor
 For optimal viewing, we recommend that you look at the full...

2-2Chapter 2: Setup
 2.3  Detaching the arm/base (for VESA 
wall mount)
The detachable arm/base of this monitor is specially designed for VESA w\
all 
mount. 
To detach the arm/base:
1.  Have the front of the monitor face down on a table.
2.  Remove the rubbers in the four screw holes. (Figure 1)
3.  Remove the base (Figure 2).
4.  Pry the rear hinge cover (Figure 3).
5.  Use a screwdriver to remove the four screws on the hinge (Figure 4), t\
hen remove the hinge.
1
2
Figure 1 Figure 2
Figure 3Figure 4...

2-3
ASUS VS248 Series LED Monitor 
2.4  Connecting the cables
1.  Connect the cables as the following instructions:
To connect the power cord
•  : connect one end of the power cord securely to 
the monitor’s AC input, the other end to a power outlet. 
To connect the VGA/HDMI/DVI cable
•  : 
Plug one end of the VGA/DVI/HDMI cable to the monitor’s VGA/DVI/
a. 
HDMI port.
Connect the other end of the VGA/DVI/HDMI cable to your computers 
b. 
VGA/DVI/HDMI port.
Tighten the two screws to secure the VGA/DVI...

2-4Chapter 2: Setup
 

3-1
ASUS VS248 Series LED Monitor 
3.1  OSD (On-Screen Display) menu 
3.1.1  How to reconfigure
Press the MENU button to 
1. 
activate the OSD menu. 
Press 
2. 
,  a n d t o 
navigate  through  the  functions. 
Highlight  the  desired  function 
and  press  the  MENU  button 
to  activate  it.  If  the  function  selected  has  a  sub-menu,  press 
  and 
  again  to  navigate  through  the  sub-menu  functions.  Highlight  the 
desired sub-menu function and press the MENU button to activate it. 
Press...

3-2
2. Color 
You can adjust Brightness, 
Contrast, Saturation, Color 
Temp., and Skin Tone from this 
menu. 
Brightness
•	 : the adjusting 
range is from 0 to 100. 
 
is a hotkey to activate this 
function.
Contrast
•	 : the adjusting range is from 0 to 100. 
 is a hotkey to 
activate this function.
Saturation
•	 : the adjusting range is from 0 to 100. 
Color Temp.
•	 : contains four modes including Cool, Normal, Warm, and 
User Mode.
Skin Tone
•  : contains three color modes including Reddish, Natural,...

3-3
ASUS VS248 Series LED Monitor 
4.  Input Select 
In this function, you can select 
your desired input source.
5.  System Setup 
Allows you to adjust the system.
Splendid Demo Mode
•	 : 
splits the screen into two for 
Splendid modes comparison.
Volume
•	 : the adjusting range is from 0 to 100 (only available for the HDMI 
input).
ECO Mode
•	 : reduces power consumption.
OSD Setup
•	 : 
Adjusts the horizontal position (H-Position)/the vertical position 
* 
(V-Position) of the OSD from 0 to 100....

3-4
 
3.2 Specifi cations summary (VS248)
Panel Type TFT LCD
Panel size 24 (16:9, 61 cm) wide screen
Max. Resolution 1920 x 1080
Pixel pitch 0.2768 mm
Brightness (Max.) 250 cd/m
2
Contrast Ratio (Typ.)1000:1
Contrast Ratio (Max.) 50,000,000:1 (with ASCR on)
Viewing angle(H/V) CR>10 170˚/160˚
Display colors 16.7 M
Response time 2 ms
SPLENDID™ Video 
Enhancement Yes
SPLENDID™ selection 6 video preset modes (by hotkey)
Auto adjustment Yes (by hotkey)
Color temperature selection 4 color temperatures
Skin-Tone...

3-5
ASUS VS248 Series LED Monitor 
3.3  Troubleshooting (FAQ)
Problem Possible Solution
Power  LED is not ON Press the 
• 
 button to check if the monitor 
is in the ON mode.
Check if the power cord is properly 
• 
connected to the monitor and the power 
outlet. 
The power LED lights amber and there is 
no screen image  Check if the monitor and the computer are 
• 
in the ON mode.
Make sure the signal cable is properly 
• 
connected the monitor and the computer.
Inspect the signal cable and make sure 
•...