Asus Vk222s User Guide

StatusDescription
  BlueON
  AmberStandby mode
  OFFOFF
    
4.  Button:
  •  Press this button to increase the value of the function selected           or move to the previous fuction.  
• This is also a hotkey for Brightness adjustment.    
6. 
 Power button          
  •  Press this button to turn the monitor on/off.
5. 
7.  Power indicator •	 The	color	definition	of	the	power	indicator	is	as	the	below	table.
•
Automatically adjust the image to its optimized position, clock, and phase 
by long...

1-6Chapter 1: Product introduction
2. Audio-in	port . This port connects PC audio source by the bundled audio 
cable.(Only for some models)   
1.4.2.2	 VK222U/VK222S/VK221S/VK221D 	
1. 
AC-IN	port . This port connects the power connector from the bundled power 
cord.     
3.  DVI	port . This 4-pin port is for PC (Personal Computer) DVI-D digital signal 
connection. (Only for some models) 
4.  VGA	port . This 15-pin port is for PC VGA connection. 
This port connects the Web-cam . 
5. 

    
USB-IN...

2.1	 Detaching	the	arm/stand		
	 (for	 VESA 	 wall 	 mount)
VESA wall mount. 
To detach the arm/stand: 
.   Remove the arm cover.
2.  Have the front of the monitor face down on a table. 
3.  Use a screwdriver to remove the three screws on the stand of the monitor as 
the below drawing shows.
4.  Detach the arm from the monitor. 
•  We  recommend  that  you  cover  the  table  surface  with  soft  cloth  to  prevent damage to the monitor. 
•  Hold the stand of the monitor when you remove the screws....

2.2	 Adjusting	the	monitor
•  For optimal viewing, we recommend that you look at the full face of the monitor, 
then adjust the monitor to the angle that is most comfortable for you.
•  Hold the stand to prevent the monitor from falling when you change its angle.
•  You can adjust the monitor’s angle from  -5º to 20º.
 
  -5º~20º
2.3 Install Life-Frame 2 software

 
with the webcam,allowing users to create their own photos or video clips\
.
•  LifeFrame 2 only supports Microsoft   Windows   Vista/XP...

3-

3.1	 OSD	 (On-Screen 	 Display) 	 menu 	
3.1.1	 How	 to 	 reconfigure
.   Press the MENU button to activate  
the OSD menu. 
          
 

2.  Press  and  to navigate through the functions. Highlight and activate 
the desired function by pressing the MENU button. If the function select\
ed 
has a sub-menu, press      and        again to navigate through the sub-menu 
functions. Highlight and activate the desired sub-menu function by press\
ing 
the MENU button.  
3.  Press  and  to change...

3-2Chapter 3: General Instruction  

2.	 Image	
 You can adjust brightness, contrast, sharpness, saturation,position (VGA\
  
         only), and focus (VGA only) from  this main function. 
VK221-P1
VK222 -P1
  • Brightness: the adjusting range is from 0 to 00.   is a hotkey to    
 activate this function.
 • 
 • Sharpness: the adjusting range is from 0 to 00.
 • Saturation: the adjusting range is from 0 to 00. 
 • Position: adjusts the horizontal postition (H-Position) and the vertical...

3-3

5.	 System
	Setup
	

 Allow you to adjust the system.

 •
 Volume: the adjusting range is from 0 to 
00. 
 is a hotkey to activate 
 

 this function. 

 •
 OSD Setup: adjusts the horizontal postition (H-Position) and 
   

 the vertical position (V-Position) of the OSD. The adjusting range is 
   

 from 0 to 
00. In the OSD Timeout selection, you can adjust the 
   

 OSD timeout from 
0 to 
20.

 •
 Language: there are ten languages for your selection, 
     

 including...

3-
4
Chapter 3: General Instruction  

3.2	
Specifications summary 
*Specifications	are	subject	to	change	without	notice.
For VK222 series models
For VK221 series models
ModelVK222H
VK222UVK222SPanel Size 22Wide22Wide22Wide
Max. Resolution WSXGA+ 1680 x 1050 WSXGA+ 1680 x 1050 WSXGA+ 1680 x 1050
Brightness (Typ.) 300cd/㎡ 300cd/㎡ 300cd/㎡
Contrast Ratio (Typ.) 1000:11000:11000:1
Viewing Angle (H/V, CR=10) ≧160°(V) ; ≧170°(H) ≧160°(V) ; ≧170°(H) ≧160°(V) ; ≧170°(H)
Display Colors 16.7 M16.7 M16.7 M...

3-5

3.3   Troubleshooting (FAQ)

ProblemPossible 	 Solution

Power  LED is not ON•  Press the  button to check if the monitor      is in the ON mode. •  Check if the power cord is properly     connected to the monitor and the power    outlet. 
The power LED lights amber and there is no screen image •  Check if the monitor and the computer are    in the ON mode. •  Make sure the signal cable is properly       connected the monitor and the computer. •  Inspect the signal cable and make sure      none of...

3-6Chapter 3: General Instruction  
3.4 
640x48031.46960Hz25.175
640x48037.86172Hz31.5
640x48037.575Hz31.5
800x60035.15656Hz36
800x60037.87960Hz40
800x60048.07772Hz50
800x60046.87575Hz49.5
1024x76848.36360Hz65
1024x76856.47670Hz75
1024x76860.02375Hz78.75
1152x86467.575Hz108
1280x9606060Hz108
1280x102463.98160Hz108
1280x102479.97675Hz135
1440x90055.93560Hz106.5
1440x90070.63575Hz136.75
WSXGA+1680x105065.2960Hz146.25
DOS640x35031.46970Hz25.175
DOS720x400 31.46970Hz28.322
VGA640x480 3567Hz 30.24...