ASUS VivoBook Flip TP501UQ User Manual

							51
Other keyboard shortcuts
Using the keyboard, you can also use the following shortcuts to help 
you launch applications and navigate Windows® 10.
\Launches Start menu
Launches Action Center
Launches the desktop
Launches the File Explorer
Opens the Share panel
Launches Settings
Launches Connect panel
Activates the Lock screen
Minimizes all currently active windows
Notebook PC E-Manual   
						

							52
Launches Search
Launches Project panel
Opens the Run window
Opens Ease of Access Center
Opens the context menu of the Start button
Launches the magnifier icon and zooms in 
your screen
Zooms out your screen
Opens Narrator Settings
Notebook PC E-Manual  
						

							53
Connecting to wireless networks
Wi-Fi
Access emails, surf the Internet, and share applications via social 
networking sites using your Notebook PC’s Wi-Fi connection. 
IMPORTANT! Airplane mode disables this feature. Ensure that Airplane 
mode is turned off before enabling the Wi-Fi connection of your 
Notebook PC.
Connecting Wi-Fi
Connect your Notebook PC to a Wi-Fi network by using the following 
steps:
or
1. Select the  icon from the taskbar.
2.  Select the 
 icon to enable Wi-Fi.
3.  Select an access point from the list of available Wi-Fi 
connections.
4. Select  Connect to start the network connection. 
NOTE: You may be prompted to enter a security key to 
activate the Wi-Fi connection.
Notebook PC E-Manual   
						

							54
or
1. Launch Settings from the Start menu.
2. Select  Devices, then select Bluetooth to search for 
Bluetooth-enabled devices.
3.  Select a device from the list. Compare the passcode 
on your Notebook PC with the passcode sent to 
your chosen device. If they are the same, select 
Yes to successfully pair your Notebook PC with the 
device.
NOTE: For some bluetooth-enabled devices, you may be 
prompted to key in the passcode of your Notebook PC.
Bluetooth 
Use Bluetooth to facilitate wireless data transfers with other Bluetooth-
enabled devices.
IMPORTANT! Airplane mode disables this feature. Ensure that Airplane 
mode is turned off before enabling the Bluetooth connection of your 
Notebook PC.
Pairing with other Bluetooth-enabled devices
You need to pair your Notebook PC with other Bluetooth-enabled 
devices to enable data transfers. Connect your devices by using the 
following steps:
Notebook PC E-Manual  
						

							55
Airplane mode
Airplane mode disables wireless communication, allowing you to use 
your Notebook PC safely while in-flight.
Turning Airplane mode off
or
1. Launch Action Center from the taskbar.
2.  Select the 
 icon to disable Airplane mode .
Press .
Turning Airplane mode on
or
1. Launch Action Center from the taskbar.
2.  Select the 
 icon to enable Airplane mode .
Press .
NOTE: Contact your airline provider to learn about related in-flight 
services that can be used and restrictions that must be followed when 
using your Notebook PC in-flight.
Notebook PC E-Manual   
						

							56
Connecting to wired networks
You can also connect to wired networks, such as local area networks 
and broadband Internet connection, using your Notebook PC’s LAN 
port.
NOTE: Contact your Internet Service Provider (ISP) for details or 
your network administrator for assistance in setting up your Internet 
connection.
To configure your settings, refer to the following procedures.
IMPORTANT! Ensure that a network cable is connected between your 
Notebook PC’s LAN port and a local area network before performing the 
following actions.
Configuring a dynamic IP/PPPoE network 
connection
or
1. Launch Settings.
2. Select  Network & Internet.
3. Select  Ethernet > Network and Sharing Center.
4.  Select your LAN then select Properties.
5. Select  Internet Protocol Version 4(TCP/IPv4) then 
select Properties.
6. Select  Obtain an IP address automatically then 
select OK.
NOTE: Proceed to the next steps if you are using PPPoE connection.
Notebook PC E-Manual  
						

							57
7. Return to the Network and Sharing Center 
window then select Set up a new connection or 
network.
8. Select  Connect to the Internet then select Next .
9. Select  Broadband (PPPoE).
10.  Type your User name, Password, and Connection 
name then select Connect.
11. Select  Close to finish the configuration.
12. Select 
 on the taskbar then select the 
connection you just created.
13.  Type your user name and password then select 
Connect to start connecting to the Internet.
Configuring a static IP network connection
or
1. Repeat steps 1 to 5 under Configuring a dynamic 
IP/PPPoE network connection
2. Select  Use the following IP address.
3.  Type the IP address, Subnet mask and Default 
gateway from your service provider.
4.  If needed, you can also type the preferred DNS 
server address and alternate DNS server address 
then select  OK.
Notebook PC E-Manual   
						

							58
Turning your Notebook PC off
You can turn off your Notebook PC by doing either of the following 
procedures:
or
•	 Launch	the	Start	menu,	then	select	 > 
Shut down to do a normal shutdown.
•	 From	the	log-in	screen,	select	
 > Shut down.
•	 Press	 to launch Shut Down 
Windows. Select Shut down from the drop-down 
list then select OK.
•	 If	your	Notebook	PC	is	unresponsive,	press	 and hold the power button for at least four (4) 
seconds until your Notebook PC turns off.
Notebook PC E-Manual  
						

							59
Putting your Notebook PC to sleep
To put your Notebook PC to Sleep mode: 
or
•	 Launch	the	Start	menu,	then	select	 > 
Sleep to put your Notebook PC to sleep.
•	 From	the	log-in	screen,	select	
 > Sleep.
Press  to launch Shut Down Windows. 
Select Sleep from the drop-down list then select OK.
NOTE: You can also put your Notebook PC to Sleep mode by pressing the 
power button once.
Notebook PC E-Manual   
						

							60
Notebook PC E-Manual