ASUS VivoBook Flip TP201SA User Manual

							51
Airplane mode
Airplane mode disables wireless communication, allowing you to use 
your Notebook PC safely while in-flight.
Turning Airplane mode off
or
1. Launch Action Center from the taskbar.
2.  Select the 
 icon to disable Airplane mode .
Press .
Turning Airplane mode on
or
1. Launch Action Center from the taskbar.
2.  Select the 
 icon to enable Airplane mode .
Press .
NOTE: Contact your airline provider to learn about related in-flight 
services that can be used and restrictions that must be followed when 
using your Notebook PC in-flight.
Notebook PC E-Manual   
						

							52
Turning your Notebook PC off
You can turn off your Notebook PC by doing either of the following 
procedures:
or
•	 Launch	the	Start	menu,	then	select	 > 
Shut down to do a normal shutdown.
•	 From	the	log-in	screen,	select	
 > Shut down.
•	 Press	 to launch Shut Down 
Windows. Select Shut Down from the drop-
down list then select OK.
•	 If	your	Notebook	PC	is	unresponsive,	press	 and hold the power button for at least four (4) 
seconds until your Notebook PC turns off.
Notebook PC E-Manual  
						

							53
Putting your Notebook PC to sleep
To put your Notebook PC to Sleep mode: 
or
•	 Launch	the	Start	menu,	then	select	 > 
Sleep to put your Notebook PC to sleep.
•	 From	the	log-in	screen,	select	
 > Sleep.
Press  to launch Shut Down Windows. 
Select Sleep from the drop-down list then select OK.
NOTE: You can also put your Notebook PC to Sleep mode by pressing the 
power button once.
Notebook PC E-Manual   
						

							54
Notebook PC E-Manual  
						

							55
Chapter 4: 
Power-On Self-Test (POST)
Notebook PC E-Manual   
						

							56
The Power-On Self-Test (POST)
The POST (Power-On Self-Test) is a series of software-controlled 
diagnostic tests that run when you turn on or restart your Notebook PC. 
The software that controls the POST is installed as a permanent part of 
the Notebook PC’s architecture. 
Using POST to access BIOS and Troubleshoot
During POST, you can access the BIOS settings or run troubleshooting 
options using the function keys of your Notebook PC. You may refer to 
the following information for more details. 
BIOS
The BIOS (Basic Input and Output System) stores system hardware 
settings that are needed for system startup in the Notebook PC. 
The default BIOS settings apply to most conditions of your Notebook 
PC. Do not change the default BIOS settings except in the following 
circumstances: 
•	 An	error	message	appears	onscreen	during	system	bootup	and	requests you to run the BIOS Setup.
•	 You	have	installed	a	new	system	component	that	requires	further	 BIOS settings or updates.
WARNING! Using inappropriate BIOS settings may result to system 
instability or boot failure. We strongly recommend that you change the 
BIOS settings only with the help of a trained service personnel.
Accessing BIOS
Restart your Notebook PC then press  during POST. 
Notebook PC E-Manual  
						

							57
BIOS Settings
NOTE: The BIOS screens in this section are for reference only. The actual 
screens may differ by model and territory.
Boot
This menu allows you to set your boot option priorities. You may refer to 
the following procedures when setting your boot priority.
1. On the Boot screen, select Boot Option #1.
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.Main   Advanced  Boot   Security   Save & Exit
Version 2.16.1243 Copyright (C) 2015 American Megatrends, Inc.
Boot Configuration
Fast Boot                    [Enabled]
Launch CSM                   [Disabled]
Driver Option Priorities
Boot Option Priorities
Boot Option #1               [Windows Boot Manager]
Add New Boot Option
Delete Boot OptionSets the system boot 
order
→
 ←  : Select Screen
↑↓   : Select Item
Enter: Select
+/—  : Change Opt.
F1   : General Help
F9   : Optimized Defaults
F10  : Save & Exit    
ESC  : Exit
Notebook PC E-Manual   
						

							58
2. Press  and select a device as the Boot Option #1. 
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.Main   Advanced  Boot   Security   Save & Exit
Version 2.16.1243 Copyright (C) 2015 American Megatrends, Inc.
Boot Configuration
Fast Boot                    [Enabled]
Launch CSM                   [Disabled]
Driver Option Priorities
Boot Option Priorities
Boot Option #1               [Windows Boot Manager]
Add New Boot Option
Delete Boot OptionSets the system boot 
order
→
 ←  : Select Screen
↑↓   : Select Item
Enter: Select
+/—  : Change Opt.
F1   : General Help
F9   : Optimized Defaults
F10  : Save & Exit    
ESC  : Exit
Boot Option #1
Windows Boot Manager
Disabled
Notebook PC E-Manual  
						

							59
Security
This menu allows you to set up the administrator and user password 
of your Notebook PC. It also allows you to control the access to your 
Notebook PC’s hard disk drive, input/output (I/O) interface, and USB 
interface.
NOTE: 
•	 If	you	install	a	User Password, you will be prompted to input this before entering your Notebook PC's operating system. 
•	 If	you	install	an	Administrator Password, you will be prompted to  input this before entering BIOS.
Version 2.16.1243 Copyright (C) 2015 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.Main   Advanced  Boot   Security   Save & Exit
Version 2.16.1243 Copyright (C) 2015 American Megatrends, Inc.
Password Description
If ONLY the Administrator’s password is set, then 
this only limits access to Setup and is only asked 
for when entering Setup. If ONLY the user’s password 
is set, then this is a power on password and must be 
entered to boot or enter Setup. In Setup, the User 
will have Administrator rights.
Administrator Password Status   NOT INSTALLED
User Password Status            NOT INSTALLED
Administrator Password
User Password
HDD Password Status :           NOT INSTALLED
Set Master Password
Set User Password
I/O Interface Security
System Mode state               User
Secure Boot state               Enabled
Secure Boot Control             [Enabled]
Key ManagementSet Administrator 
Password. The password 
length must be in the 
following range: 
Minimum length 3
Maximum length 20
Must type with character:
a-z, 0-9
→
 ←  : Select Screen
↑↓   : Select Item
Enter: Select
+/—  : Change Opt.
F1   : General Help
F9   : Optimized Defaults
F10  : Save & Exit    
ESC  : Exit
Notebook PC E-Manual   
						

							60
To set the password:
1. On the Security screen, select Administrator Password or User 
Password.
2.  Type in a password then press 
.
3.  Re-type to confirm the password then press 
.
To clear the password:
1.  On the Security screen, select Administrator Password or User 
Password.
2.  Type in the current password then press 
.
3.  Leave the Create New Password field blank then press 
.
4. Select  Yes in the confirmation box then press 
.
Notebook PC E-Manual