Asus Vh226h User Guide

2-1ASUS	 VH226 	 Series 	 LCD 	 Monitor 	
2.1  Assembling the monitor base
To	 assemble 	 the 	 monitor 	 base:
1.	 Have	 the 	 front 	 of 	 the 	 monitor 	 face 	 down 	 on 	 a 	 table.
2.	 Connect	 the 	 base 	 with 	 the 	 arm 	 according 	 to 	 the 	 below 	 drawing. 	 A 	 click 	 shows 	
that	 the 	 base 	 has 	 been 	 connected 	 successfully. 	
We	 recommend 	 that 	 you 	 cover 	 the 	 table 	 surface 	 with 	 soft 	 cloth 	 to 	 prevent 	damage	 to 	 the 	 monitor.
2.2  Adjusting the monitor...

2-2Chapter	 2: 	 Setup

2.3    Detaching the arm/base  
(for VESA wall mount)
The	 detachable 	 arm/base 	 of 	 this 	 LCD 	 monitor 	 is 	 specially 	 designed 	 for 	 VESA 	 wall 	
mount.	
To	 detach 	 the 	 arm/base: 	
1.	 Have	 the 	 front 	 of 	 the 	 monitor 	 face 	 down 	 on 	 a 	 table.
2.	 Remove	 the 	 rubbers 	 in 	 the 	 four 	 screw 	 holes 	 (Figure 	 1).
3.	 Use	 a 	 screwdriver 	 to 	 remove 	 the 	 two 	 screws 	 on 	 the 	 arm 	 (Figure 	 1), 	 then 	 slide 	
out	 the 	 arm/base 	 to...

2-3ASUS	 VH226 	 Series 	 LCD 	 Monitor 	

2.4  Connecting the cables
1.	 Connect 	 the 	 cables 	 as 	 the 	 following 	 instructions:
VGAAudio-inVGAAudio-inEarphone jackHDMI
(VH226H)(VH226S)
To. connect . the . audio . cable:	 connect 	 one 	 end 	 of 	 the 	 audio 	 cable 	 to 	 the 		
monitor’s	 Audio-in 	 port, 	 the 	 other 	 end 	 to 	 the 	 computer's 	 audio-out 	 port. 	
To. connect . the . power . cord:	 connect 	 one 	 end 	 of 	 the 	 power 	 cord 	 securely 	 to 	
the	 monitor’s 	 AC...

2-4Chapter	 2: 	 Setup
 

3-1ASUS	 VH226 	 Series 	 LCD 	 Monitor 	
3.1  OSD (On-Screen Display) menu 
3.1.1	 How 	 to 	 reconfigure
Press	 the 	 MENU 	 button 	 to 	 activate 	 the 	
OSD	 menu. 	
1.
Press		and 		to 	 navigate 	 through 	 the 	 functions. 	 Highlight 	 and 	
activate	 the 	 desired 	 function 	 by 	 pressing 	 the 	 MENU 	 button. 	 If 	 the 	 function 	
selected	 has 	 a 	 sub-menu, 	 press 		and 		again 	 to 	 navigate 	 through 	
the	 sub-menu 	 functions. 	 Highlight 	 and 	 activate 	 the 	 desired...

3-2Chapter	 3: 	 General 	 Instruction 		

2.. Image .
You	 can 	 adjust 	 brightness, 	 contrast, 	
sharpness,	 saturation, 	 position 	 (VGA 	 only), 	
and	 focus 	 (VGA 	 only) 	 from 	 this 	 menu. 	
Brightness:	 the 	 adjusting 	 range 	 is 	 from 	 0 	 to 	 100. 		is 	 a 	 hotkey 	 to 	
activate	 this 	 function.
Contrast:	 the 	 adjusting 	 range 	 is 	 from 	 0 	 to 	 100.
ASCR:	 turns 	 on/off 	 the 	 ASCR 	 (ASUS 	 Smart 	 Control 	 Ratio) 	 function.
Sharpness:	 the 	 adjusting 	 range 	 is...

3-3ASUS	 VH226 	 Series 	 LCD 	 Monitor 	

4.. Input . Select .
In	 this 	 function, 	 you 	 can 	 select 	 your 	
desired	 input 	 source.
(VH226H)
5.. System . Setup .
Allow	 you 	 to 	 adjust 	 the 	 system.
Volume:	 the 	 adjusting 	 range 	 is 	 from 	 0 	 to 	 100. 		is 	 a 	 hotkey 	 to 	
activate	 this 	 function. 	
Aspect. Control:	 adjusts 	 the 	 aspect 	 ratio 	 to 	 full 	 or 	 4:3. 	
OSD. Setup:	
Adjusts 	 the 	 horizontal 	 postition 	 (H-Position)/the 	 vertical 	 position 	
(V-Position)...

3-4Chapter	 3: 	 General 	 Instruction 		

3.2	 Specifications	 summary 	 (VH226H)
Panel. TypeTFT	 LCDPanel . size21.5"	 (16:9) 	 wide 	 screenMax... Resolution1920	 x 	 1080
Pixel. pitch
0.248	 mmBrightness . (Typ.)250	 cd/m2
Brightness . (Max.)300	 cd/m2
Contrast . Ratio . (Typ.)1000:1Contrast. Ratio . (Max.)12000:1	(with	ASCR	on)Viewing. angle(H/V) . CR>10170˚/160˚Display. colors16.7	 MResponse . time2	 msSPLENDID™ . Video .EnhancementYes
SPLENDID™. selection5	 video 	 preset 	 modes 	 (by...

3-5ASUS	 VH226 	 Series 	 LCD 	 Monitor 	

Specifications	 summary 	 (VH226S)
Panel. TypeTFT	 LCDPanel . size21.5"	 (16:9) 	 wide 	 screenMax... Resolution1920	 x 	 1080
Pixel. pitch
0.248	 mmBrightness . (Typ.)250	 cd/m2
Brightness . (Max.)300	 cd/m2
Contrast . Ratio . (Typ.)1000:1Contrast. Ratio . (Max.)12000:1	(with	ASCR	on)Viewing. angle(H/V) . CR>10170˚/160˚Display. colors16.7	 MResponse . time2	 msSPLENDID™ . Video .EnhancementYes
SPLENDID™. selection5	 video 	 preset 	 modes 	 (by...

3-6Chapter	 3: 	 General 	 Instruction 		

3.3  Troubleshooting (FAQ)
ProblemPossible . Solution
Power		 LED 	 is 	 not 	 ONPress	 the 		button 	 to 	 check 	 if 	 the 	 monitor 	is	 in 	 the 	 ON 	 mode.Check	 if 	 the 	 power 	 cord 	 is 	 properly 	connected	 to 	 the 	 monitor 	 and 	 the 	 power 	outlet.	
•
•
The	 power 	 LED 	 lights 	 amber 	 and 	 there 	 is 	no	 screen 	 image 	Check	 if 	 the 	 monitor 	 and 	 the 	 computer 	 are 	in	 the 	 ON 	 mode.Make	 sure 	 the 	 signal 	 cable 	 is...