Home > Asus > Monitor > Asus Vh203t User Guide

Asus Vh203t User Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Asus Vh203t User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 379 Asus manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							
    2-1ASUS	 VH203 	 Series 	 LCD 	 Monitor 	
    
    2.1  Assembling the monitor base
    To	 assemble 	 the 	 monitor 	 base:
    1.	 Have	 the 	 front 	 of 	 the 	 monitor 	 face 	 down 	 on 	 a 	 table.
    2.	 Connect	 the 	 base 	 with 	 the 	 arm 	 according 	 to 	 the 	 below 	 drawing. 	 A 	 click 	 shows 	
    that	 the 	 base 	 has 	 been 	 connected 	 successfully. 	
    We	 recommend 	 that 	 you 	 cover 	 the 	 table 	 surface 	 with 	 soft 	 cloth 	 to 	 prevent 	damage	 to 	 the 	 monitor.
    
    2.2  Adjusting the monitor
    	For	 optimal 	 viewing, 	 we 	 recommend 	 that 	 you 	 look 	 at 	 the 	 full 	 face 	 of 	 the 	•	
    monitor,	 then 	 adjust 	 the 	 monitor 	 to 	 the 	 angle 	 that 	 is 	 most 	 comfortable 	 for 	 you.
    	Hold	 the 	 stand 	 to 	 prevent 	 the 	 monitor 	 from 	 falling 	 when 	 you 	 change 	 its 	 angle.•	
    	You	 can 	 adjust 	 the 	 monitor’s 	 angle 	 from 	 -5˚ 	 to 	 20˚.•	
    
    	-5˚~20˚
    
    It 	 is 	 normal 	 that 	 the 	 monitor 	 slightly 	 shakes 	 while 	 you 	 adjust 	 the 	 the 	 viewing 	
    angle.
    	
     
    						
    							
    2-2Chapter	 2: 	 Setup
    
    2.3    Detaching the arm/base  
    (for VESA wall mount)
    The	 detachable 	 arm/base 	 of 	 this 	 LCD 	 monitor 	 is 	 specially 	 designed 	 for 	 VESA 	 wall 	
    mount.	
    To	 detach 	 the 	 arm/base: 	
    1.	 Have	 the 	 front 	 of 	 the 	 monitor 	 face 	 down 	 on 	 a 	 table.
    2.	 Remove	 the 	 rubbers 	 in 	 the 	 four 	 screw 	 holes 	 (Figure 	 1).
    3.	 Use	 a 	 screwdriver 	 to 	 remove 	 the 	 two 	 screws 	 on 	 the 	 arm 	 (Figure 	 1), 	 then 	 slide 	
    out	 the 	 arm/base 	 to 	 detach 	 it 	 from 	 the 	 monitor 	 (Figure 	 2).
    
    VGA
    AUDIO-I N
    
    Arm/base
    
    Rubbers in the 
    screw holes 
    
    Two screws 
    
    Figure 1 Figure 2
    
    1
    
    1
    
    2
    
     
    
    We	 recommend 	 that 	 you 	 cover 	 the 	 table 	 surface 	 with 	 soft 	 cloth 	 to 	 prevent 	
    damage
    	 to 	 the 	 monitor.
     
    						
    							
    2-3ASUS	 VH203 	 Series 	 LCD 	 Monitor 	
    
    2.4  Connecting the cables
    1.	 Connect 	 the 	 cables 	 as 	 the 	 following 	 instructions:
    
    VGA
    AUDIO-IN
    
    To connect the audio cable•	: 	 connect 	 one 	 end 	 of 	 the 	 audio 	 cable 	 to 	 the 	
    monitor’s	 Audio-in 	 port, 	 the 	 other 	 end 	 to 	 the 	 computer's 	 audio-out 	 port. 	
    To connect the power cord•	:	 connect 	 one 	 end 	 of 	 the 	 power 	 cord 	 securely 	 to 	
    the	 monitor’s 	 AC 	 input 	 port, 	 the 	 other 	 end 	 to 	 a 	 power 	 outlet.
    To connect the VGA/DVI cable•	:	
    Plug 	 the 	 VGA/DVI 	 connector 	 to 	 the 	 LCD 	 monitor’s 	 VGA/DVI 	 port.a. 
    Connect 	 the 	 other 	 end 	 of 	 the 	 VGA/DVI 	 cable 	 to 	 your 	 computer's 	 VGA/b.	
    DVI.
    Tighten	 the 	 two 	 screws 	 to 	 secure 	 the 	 VGA/DVI 	 connector.c. 
    
    When 	 both 	 VGA 	 and 	 DVI 	 cables 	 are 	 connected, 	 you 	 can 	 choose 	 either 	 VGA 	
    mode
    	 or 	 DVI 	 mode 	 from 	 the 	 Input 	 Select 	 item 	 of 	 OSD 	 functions.
    
    2.	 Gather	 all 	 the 	 cables 	 with 	 the 	 cable 	 management 	 slot.
    2.5  Turning on the monitor
    Gently	 press 	 the 	 power 	 button 	
    .	 See 	 page 	 1-2 	 for 	 the 	 location 	 of 	 the 	 power 	 button. 	
    The	 power 	 indicator 	
    	lights 	 up 	 in 	 blue 	 to 	 show 	 that 	 the 	 monitor 	 is 	 ON.
    
    VGA
    AUDIO-I N
    Cable management slot
     
    						
    							
    3-1ASUS	 VH203 	 Series 	 LCD 	 Monitor 	
    3.1  OSD (On-Screen Display) menu 
    3.1.1  How to reconfigure
    Press	 the 	 MENU 	 button 	 to 	 activate 	 the 	1. 
    OSD	 menu. 	
    
    Press	2. 
    	and 	
    	(or 	
    )	 to 	 navigate 	 through 	 the 	 functions. 	
    Highlight	 and 	 activate 	 the 	 desired 	 function 	 by 	 pressing 	 the 	 MENU 	 button. 	
    If	 the 	 function 	 selected 	 has 	 a 	 sub-menu, 	 press 	
    	and 	
    	(or 	
    
    )	 again 	 to 	 navigate 	 through 	 the 	 sub-menu 	 functions. 	 Highlight 	 and 	
    activate	 the 	 desired 	 sub-menu 	 function 	 by 	 pressing 	 the 	 MENU 	 button. 	
    Press	3. 
    	and 	
     (or	
    )	to 	 change 	 the 	 settings 	 of 	 the 	
    selected	 function.
    To	 exit 	 the 	 OSD 	 menu, 	 press 	 the 	4. 
    	button. 	 Repeat 	 step 	 2 	 and 	 step 	 3 	 to 	
    adjust	 any 	 other 	 function.
    3.1.2  OSD Function Introduction
    Spendid1. 
    This 	 function 	 contains 	 five 	 sub-functions 	
    you	 can 	 select 	 for 	 your 	 preference. 	 Each 	
    mode	 has 	 the 	 Reset 	 selection, 	 allowing 	
    you	 to 	 maintain 	 your 	 setting 	 or 	 return 	 to 	 the 	
    preset	 mode.
    
    Scenery Mode• :	 best 	 choice 	 for 	 scenery 	 photo 	 display 	 with 	 SPLENDID™ 	
    Video	 Enhancement.
    Standard Mode• :	 best 	 choice 	 for 	 document 	 editing 	 with 	 SPLENDID™ 	
    Video	 Enhancement.
    Theater Mode• :	 best 	 choice 	 for 	 movie 	 with 	 SPLENDID™ 	 Video 	
    Enhancement.
    Game Mode• :	 best 	 choice 	 for 	 game 	 playing 	 with 	 SPLENDID™ 	 Video 	
    Enhancement.
    Night View Mode• :	 best 	 choice 	 for 	 dark-scene 	 game 	 or 	 movie 	 with 	
    SPLENDID™	 Video 	 Enhancement.
    
    In	 the 	 Standard 	 Mode, 	 the 	 ASCR, 	 Saturation, 	 and 	 Sharpness 	 functions 	 are 	
    •	
    not	 user-configurable.
    Except
    	 in 	 the 	 Standard 	 Mode, 	 the 	 sRGB 	 function 	 is 	 not 	 user-configurable.
    •	
     
    						
    							
    3-2Chapter	 3: 	 General 	 Instruction 		
    
    2.  Image 
    You	 can 	 adjust 	 brightness, 	 contrast, 	 ASCR, 	
    sharpness,	 saturation, 	 position 	 (VGA 	 only), 	
    and	 focus 	 (VGA 	 only) 	 from 	 this 	 menu. 	
    
    Brightness•	:	 the 	 adjusting 	 range 	 is 	 from 	 0 	 to 	 100. 	
    	is 	 a 	 hotkey 	 to 	
    activate	 this 	 function.
    Contrast•	:	 the 	 adjusting 	 range 	 is 	 from 	 0 	 to 	 100. 	
    	is 	 a 	 hotkey 	 to 	
    activate	 this 	 function. 	 (For 	 those 	 models 	 without 	 speakers)
    ASCR•	:	 turns 	 on/off 	 the 	 ASCR 	 (ASUS 	 Smart 	 Contrast 	 Ratio) 	 function.
    Sharpness•	:	 the 	 adjusting 	 range 	 is 	 from 	 0 	 to 	 100.
    Saturation•	:	 the 	 adjusting 	 range 	 is 	 from 	 0 	 to 	 100. 	
    Position•	:	 adjusts 	 the 	 horizontal 	 postition 	 (H-Position) 	 and 	 the 	 vertical 	
    position	 (V-Position) 	 of 	 the 	 image. 	 The 	 adjusting 	 range 	 is 	 from 	 0 	 to 	 100.
    Focus• :	 reduces 	 Horizonal-line 	 noise 	 and 	 Vertical-line 	 noise 	 of 	 the 	 image 	
    by	 adjusting 	 (Phase) 	 and 	 (Clock) 	 separately. 	 The 	 adjusting 	 range 	 is 	 from 	
    0	 to 	 100.
    
    Phase 	 adjusts 	 the 	 phase 	 of 	 the 	 pixel 	 clock 	 signal. 	 With 	 a 	 wrong 	 phase 	
    •	
    adjustment, 	 the 	 screen 	 shows 	 horizontal 	 disturbances.
    Clock
    	 (pixel 	 frequency) 	 controls 	 the 	 number 	 of 	 pixels 	 scanned 	 by 	 one 	
    •	 horizontal
    	 sweep. 	 If 	 the 	 frequency 	 is 	 not 	 correct, 	 the 	 screen 	 shows 	 vertical 	
    stripes
    	 and 	 the 	 image 	 is 	 not 	 proportional.
    
    3.  Color
    Select 	 the 	 image 	 color 	 you 	 like 	 from 	 this 	
    function.	
    
    Color Temp.•	:	 contains 	 five 	 color 	 modes 	 including 	 Cool, 	 Normal, 	 Warm, 	
    sRGB,	 and 	 User 	 mode.
    Skin Tone• :	 contains 	 three 	 color 	 modes 	 including 	 Reddish, 	 Natural, 	 and 	
    Yellowish.	
    
    In	 the 	 User 	 mode, 	 colors 	 of 	 R 	 (Red), 	 G 	 (Green), 	 and 	 B 	 (Blue) 	 are 	 user-
    configurable; 	 the 	 adjusting 	 range 	 is 	 from 	 0-100.
     
    						
    							
    3-3ASUS	 VH203 	 Series 	 LCD 	 Monitor 	
    
    4.  Input Select 
    In	 this 	 function, 	 you 	 can 	 select 	 your 	
    desired	 input 	 source.
    
    (VH203T/VH203N)
    5.  System Setup 
    Allow	 you 	 to 	 adjust 	 the 	 system.
    
    Volume•	:	 the 	 adjusting 	 range 	 is 	 from 	 0 	 to 	 100. 	
    	is 	 a 	 hotkey 	 to 	
    activate	 this 	 function. 	 (For 	 those 	 models 	 with 	 speakers)
    Aspect Control•	:	 adjusts 	 the 	 aspect 	 ratio 	 to 	 “Full” 	 or 	 “4:3”. 	
    OSD Setup•	:	
    Adjusts 	 the 	 horizontal 	 postition 	 (H-Position)/the 	 vertical 	 position 	* 
    (V-Position) 	 of 	 the 	 OSD 	 from 	 0 	 to 	 100.
    Adjusts	 the 	 OSD 	 timeout 	 from 	 10 	 to 	 120.* 
    Enables 	 or 	 disables 	 the 	 DDC/CI 	 function.* 
    Language•	:	 there 	 are 	 eleven 	 languages 	 for 	 your 	 selection, 	 including 	
    English,	 German, 	 Italian, 	 French, 	 Dutch, 	 Spanish, 	 Russian, 	 Traditional 	
    Chinese,	 Simplified 	 Chinese, 	 Japanese, 	 and 	 Korean. 	
    Information•	:	 shows 	 the 	 monitor 	 information. 	
    All Reset• :	 “Yes” 	 allows 	 you 	 to 	 restore 	 the 	 default 	 setting.
     
    						
    							
    3-4Chapter	 3: 	 General 	 Instruction 		
    
    3.2	 Specifications	 summary 	 (VH203T)
    
    Panel typeTFT	 LCDPanel size20"	 (16:9) 	 wide 	 screenMax.  resolution1600	 x 	 900
    Pixel pitch0.2768	 mmBrightness (Typ.)250	 cd/m2
    Brightness (Max.)300	 cd/m2
    Contrast ratio (Typ.)1000:1Contrast ratio (Max.)10000:1 	 (with 	 ASCR 	 on)Viewing angle(H/V) CR>10160˚/160˚Display colors16.7	 MResponse time5	 msSPLENDID™ Video EnhancementYes
    SPLENDID™ selection5	 video 	 preset 	 modes 	 (by 	 hotkey)Auto adjustmentYes	 (by 	 hotkey)Color temperature selection5	 color 	 temperaturesSkin-tone selection3 skin-tonesDigital inputDVI-D	 with 	 HDCPAnalog inputD-SubAudio-in port3.5	 mm 	 Mini-jackColorsBlackSpeaker (Built-in)1	 W 	 x 	 2 	 Stereo, 	 RMSPower LEDBlue	 (On)/ 	 Amber 	 (Standby)VESA wall mount100	 x 	 100 	 mmTilt-5˚~+20˚Kensington lockYesVoltage ratingAC:	 100~240VPower consumptionPower 	 On 	 : 	 < 	 50 	 W, 	 Standby: 	 < 	 1 	 W, 	 Power 	 Off: 	 < 	 1 	 W
    Temperature (Operating)0˚C~40˚C
    Temperature  (Non-operating)-20˚C~+60˚C
    Dimension (W x H x D)486.61	 mm 	 x 	 317.45 	 mm 	 x 	 214.97 	 mm 	 (machine) 551	 mm 	 x 	 458 	 mm 	 x 	 132 	 mm 	 (package) 	
    Weight (Esti.)
    4.2	kg	(Net)	;	5.8	kg	(Gross)
    Multi-languages11	 languages 	 (English, 	 German, 	 Italian, 	 French, 	 Dutch, 	Spanish,	 Russian, 	 Traditional 	 Chinese, 	 Simplified 	Chinese,	 Japanese, 	 Korean)
    Accessories VGA	 cable, 	 DVI 	 cable, 	 audio 	 cable, 	 power 	 cord, 	 quick 	start	 guide, 	 warranty 	 card
    Regulation approvals Energy	 Star®,	 CB, 	 CE, 	 Gost-R, 	 CCC, 	 UL/cUL, 	 FCC, 	C-Tick,	 BSMI, 	 VCCI, 	 RoHS, 	 WEEE, 	 PSB, 	 J-MOSS, 	 EK, 	Windows	 Vista 	 WHQL
    *Specifications 	 are 	 subject 	 to 	 change 	 without 	 notice.
     
    						
    							
    3-5ASUS	 VH203 	 Series 	 LCD 	 Monitor 	
    
    Specifications	 summary 	 (VH203S)
    
    Panel typeTFT	 LCDPanel size20"	 (16:9) 	 wide 	 screenMax.  resolution1600	 x 	 900
    Pixel pitch0.2768	 mmBrightness (Typ.)250	 cd/m2
    Brightness (Max.)300	 cd/m2
    Contrast ratio (Typ.)1000:1Contrast ratio (Max.)10000:1 	 (with 	 ASCR 	 on)Viewing angle(H/V) CR>10160˚/160˚Display colors16.7	 MResponse time5	 msSPLENDID™ Video EnhancementYes
    SPLENDID™ selection5	 video 	 preset 	 modes 	 (by 	 hotkey)Auto adjustmentYes	 (by 	 hotkey)Color temperature selection5	 color 	 temperaturesSkin-tone selection3 skin-tonesAnalog inputD-SubAudio-in port3.5	 mm 	 Mini-jackColorsBlackSpeaker (Built-in)1	 W 	 x 	 2 	 Stereo, 	 RMSPower LEDBlue	 (On)/ 	 Amber 	 (Standby)VESA wall mount100	 x 	 100 	 mmTilt-5˚~+20˚Kensington lockYesVoltage ratingAC:	 100~240VPower consumptionPower 	 On 	 : 	 < 	 50 	 W, 	 Standby: 	 < 	 1 	 W, 	 Power 	 Off: 	 < 	 1 	 W
    Temperature (Operating)0˚C~40˚C
    Temperature  (Non-operating)-20˚C~+60˚C
    Dimension (W x H x D)486.61	 mm 	 x 	 317.45 	 mm 	 x 	 214.97 	 mm 	 (machine) 551	 mm 	 x 	 458 	 mm 	 x 	 132 	 mm 	 (package) 	
    Weight (Esti.)
    4.2	kg	(Net)	;	5.8	kg	(Gross)
    Multi-languages11	 languages 	 (English, 	 German, 	 Italian, 	 French, 	 Dutch, 	Spanish,	 Russian, 	 Traditional 	 Chinese, 	 Simplified 	Chinese,	 Japanese, 	 Korean)
    Accessories VGA	 cable, 	 audio 	 cable, 	 power 	 cord, 	 quick 	 start 	 guide, 	warranty	 card
    Regulation approvals Energy	 Star®,	 CB, 	 CE, 	 Gost-R, 	 CCC, 	 UL/cUL, 	 FCC, 	C-Tick,	 BSMI, 	 VCCI, 	 RoHS, 	 WEEE, 	 PSB, 	 J-MOSS, 	 EK, 	Windows	 Vista 	 WHQL
    *Specifications 	 are 	 subject 	 to 	 change 	 without 	 notice.
     
    						
    							
    3-6Chapter	 3: 	 General 	 Instruction 		
    
    Specifications	 summary 	 (VH203N)
    
    Panel typeTFT	 LCDPanel size20"	 (16:9) 	 wide 	 screenMax.  resolution1600	 x 	 900
    Pixel pitch0.2768	 mmBrightness (Typ.)250	 cd/m2
    Brightness (Max.)300	 cd/m2
    Contrast ratio (Typ.)1000:1Contrast ratio (Max.)10000:1 	 (with 	 ASCR 	 on)Viewing angle(H/V) CR>10160˚/160˚Display colors16.7	 MResponse time5	 msSPLENDID™ Video EnhancementYes
    SPLENDID™ selection5	 video 	 preset 	 modes 	 (by 	 hotkey)Auto adjustmentYes	 (by 	 hotkey)Color temperature selection5	 color 	 temperaturesSkin-tone selection3 skin-tonesDigital inputDVI-D	 with 	 HDCPAnalog inputD-SubColorsBlackPower LEDBlue	 (On)/ 	 Amber 	 (Standby)VESA wall mount100	 x 	 100 	 mmTilt-5˚~+20˚Kensington lockYesVoltage ratingAC:	 100~240VPower consumptionPower 	 On 	 : 	 < 	 45 	 W, 	 Standby: 	 < 	 1 	 W, 	 Power 	 Off: 	 < 	 1 	 W
    Temperature (Operating)0˚C~40˚C
    Temperature  (Non-operating)-20˚C~+60˚C
    Dimension (W x H x D)486.61	 mm 	 x 	 317.45 	 mm 	 x 	 214.97 	 mm 	 (machine) 551	 mm 	 x 	 458 	 mm 	 x 	 132 	 mm 	 (package) 	
    Weight (Esti.)
    4.2	kg	(Net)	;	5.8	kg	(Gross)
    Multi-languages11	 languages 	 (English, 	 German, 	 Italian, 	 French, 	 Dutch, 	Spanish,	 Russian, 	 Traditional 	 Chinese, 	 Simplified 	Chinese,	 Japanese, 	 Korean)
    Accessories VGA	 cable, 	 DVI 	 cable, 	 power 	 cord, 	 quick 	 start 	 guide, 	warranty	 card
    Regulation approvals Energy	 Star®,	 CB, 	 CE, 	 Gost-R, 	 CCC, 	 UL/cUL, 	 FCC, 	C-Tick,	 BSMI, 	 VCCI, 	 RoHS, 	 WEEE, 	 PSB, 	 J-MOSS, 	 EK, 	Windows	 Vista 	 WHQL
    *Specifications 	 are 	 subject 	 to 	 change 	 without 	 notice.
     
    						
    All Asus manuals Comments (0)

    Related Manuals for Asus Vh203t User Guide