Asus Ve258h User Guide

							1-5ASUS	LED	Monitor	VE258H/VE258Q	Series
1.5.2 Rear of the LED monitor
Screw Holes 
for VESA 
Wall Mount
123456
7
1AC-IN port
2DisplayPort (only available for model VE258Q)
3HDMI-IN port
4DVI port
5VGA port
6Audio Line-in port
7Earphone-out port
  
						

							2-1Chapter 2: Setup
2.1   Detaching the arm/stand 
(for VESA wall mount)
The	detachable	stand	of	the	VE258H/VE258Q	Series	LED	monitor	is	specially	
designed	for	VESA	wall	mount.
To detach the arm/stand:
1.	 Disconnect	power	and	signal	cables.	Carefully	put the front of the monitor 
face down on a clean table.
2.	 Use	a	screwdriver	to	remove	the two screws that secure the stand to the 
monitor.
3. Detach the stand from the monitor.
•		
We	recommend	that	you	cover	the	table	surface	with	soft	cloth	to	prevent	
damage to the monitor.
•	 	 Hold	the	stand	of	the	monitor	while	removing	the	screws.
•	The	VESA	wall	mount	kit	(	100	x	100	mm)	is	purchased	separately.
•	 Use	only	the	UL	Listed	Wall	Mount	Bracket	with	minimum	weight/load	16.4	
kg	(Screw	size:	4	x	12	mm).
  
						

							2-2ASUS	LED	Monitor	VE258H/VE258Q	Series
2.2 Adjusting the monitor
•		For	optimal	viewing,	we	recommend	that	you	look	at	the	full	face	of	the	
monitor,	then	adjust	the	monitor	to	the	angle	that	is	most	comfortable	for	you.
•	 
Hold the stand to prevent the monitor from falling while changing its an\
gle.
•		You	can	adjust	the	monitor’s	angle	from	-5˚	to	20˚.
-5 ~ 20
  
						

							3-1Chapter	3:	General	Instruction
3.1 OSD (On-Screen Display) menu
3.1.1	 How	to	reconfigure
VE258
Splendid
Color
Image
Sound
Input Select
MoveMenuExit
System Setup Scenery Mode
Standard Mode
Theater Mode
Game Mode
sRGB
Night View Mode
1. Press	the	MENU	button	to	activate	the	OSD	menu.
2. Press  and  to navigate through the functions. Highlight and activate 
the	desired	function	by	pressing	the	MENU	button.	If	the	function	selected	
has	a	sub-menu,	press	 and  again to navigate through the sub-menu 
functions.	Highlight	and	activate	the	desired	sub-menu	function	by	pressing	
the	MENU	button.
3. Press  and  to change the settings of the selected function.
4. To	exit	the	OSD	menu,	press	the	 button. Repeat step 2 and step 3 to 
adjust	any	other	function.
  
						

							3-2ASUS	LED	Monitor	VE258H/VE258Q	Series
3.1.2 OSD Function Introduction
1. Splendid
This	function	contains	six	sub-functions	that	you	can	select	for	your	
preference.	Each	mode	has	the	Reset	selection,	allowing	you	to	maintain	
your	setting	or	return	to	the	preset	mode.
VE258
Splendid
Color
Image
Sound
Input Select
MoveMenuExit
System Setup Scenery Mode
Standard Mode
Theater Mode
Game Mode
sRGB
Night View Mode
•	Scenery Mode:	This	is	the	best	choice	for	scenery	photo	displaying	with	
SPLENDID™	Video	Intelligence.
•	Standard Mode: This is the best choice for document editing with 
SPLENDID™	Video	Intelligence.
•	Theater Mode: This is the best choice for movie watching with 
SPLENDID™	Video	Intelligence.
•	Game Mode:	This	is	the	best	choice	for	game	playing	with	SPLENDID™	
Video	Intelligence.
•	Night View Mode:	This	is	the	best	choice	for	playing	dark-scene	game	or	
watching	movie	with	SPLENDID™	Video	Intelligence.
•	sRGB: This is the best choice for viewing photos and graphics from PCs.
•	
In the Standard Mode,	the	Saturation,	Skin Tone,	Sharpness,	and	
ASCR functions are not user-configurable.
•	 In the sRGB,	the	Saturation,	Color Temp.,	Skin Tone,	Sharpness,	and	
ASCR functions are not user-configurable.
  
						

							3-3Chapter	3:	General	Instruction
2. Color
Select	the	image	color	you	like	from	this	function.
VE258
Splendid
Color
Image
Sound
Input Select
MoveMenuExit
System Setup Brightness
Contrast
Saturation
Color Temp.
100
80
User Mode
Skin Tone
90
Natural
•	Brightness: The adjusting range is from 0 to 100. The  button is also a 
hot	key	to	activate	this	function.
•	Contrast: The adjusting range is from 0 to 100.
•	Saturation: The adjusting range is from 0 to 100.
•	Color Temp.:	Contain	three	preset	color	modes	(Cool,	Normal,	Warm)	
and	one	User	Mode.
•	Skin Tone:	Contain	three	color	modes	including	Reddish,	Natural,	and	
Yellowish.
In	the	User	Mode,	colors	of	R	(Red),	G	(Green),	and	B	(Blue)	are	
userconfigurable; the adjusting range is from 0 ~ 100.
  
						

							3-4ASUS	LED	Monitor	VE258H/VE258Q	Series
3. Image
You	can	adjust	the	image	Sharpness,	Trace	Free,	Aspect	Control,	Position	
(VGA	only),	and	Focus	(VGA	only)	from	this	main	function.
VE258
Splendid
Color
Image
Sound
Input Select
MoveMenuExit
System Setup
Focus Sharpness
Trace Free
Aspect Control
ASCR 60
60
Full
Position
OFF
•	Sharpness: Adjust the picture sharpness. The adjusting range is from 0 
to 100.
•	Trace Free: Speed	up	the	response	time	by	Over	Drive	technology.	The	
adjusting range is from lower 0 to faster 100.
•	Aspect Control:	Adjust	the	aspect	ratio	to	“Full”,	“4:3”,	or	“Over	Scan”	
(only	available	for	HDMI	input).
•	ASCR:	Select	ON	or	OFF	to	enable	or	disable	dynamic	contrast	ratio	
function.
•	Position:	Adjust	the	horizontal	position	(H-Position)	and	the	vertical	
position	(V-Position)	of	the	image.	The	adjusting	range	is	from	0	to	100	
(only	available	for	VGA	input).
•	Focus:	Reduce	Horizontal-line	noise	and	Vertical-line	noise	of	the	image	
by	adjusting	(Phase)	and	(Clock)	separately.	The	adjusting	range	is	from	
0	to	100	(only	available	for	VGA	input).
  
						

							3-5Chapter	3:	General	Instruction
4. Sound(only available for model VE258Q)
Adjust	the	sound	settings	to	your	preference.
VE258
Splendid
Color
Image
Sound
Input Select
MoveMenuExit
System Setup Volume
Mute
Source
50
OFF
Line In
•	Volume: Adjust the output volume level. The 	button	is	also	a	hot	key	
to activate this function.
•	Mute: Mute the output volume.
•	Source:	Adjust	audio	source	to	“Line	In”	or	“HDMI”		(only	available	for	
HDMI	input); 
Adjust	audio	source	to	“Line	In”	or	“DisplayPort”	(only	available	for	
DisplayPort	input).
5.  Input Select
Select the input source from VGA,	DVI,	HDMI,	or	DisplayPort(only	available	
for	model	VE258Q).
VE258
Splendid
Color
Image
Sound
Input Select
MoveMenuExit
System Setup VGA
DVI
HDMI
DisplayPort
  
						

							3-6ASUS	LED	Monitor	VE258H/VE258Q	Series
6. System Setup
Adjusts	the	system	configuration.
VE258
Splendid
Color
Image
Sound
Input Select
MoveMenuExit
System Setup
Language
All Reset
Splendid Demo Mode
OFF
English
OSD Setup
Information
50
Volume
•	Splendid Demo Mode: Activate the demo mode for the Splendid 
function.
•	Volume:	Adjust	the	Volume	level	of	speakers	(only	available	for	model	
VE258H).
•	OSD Setup:	Adjust	the	horizontal	position	(H-Position),	vertical	position	
(V-Position),	OSD	Timeout,	DDD/CI,	and	Transparency	of	the	OSD	
screen. 
•	Language:	Select	OSD	language.	The	selections	are	English,	French,	
German,	Spanish,	Italian,	Dutch,	Russian,	Traditional	Chinese,	Simplified	
Chinese,	and	Japanese.
•	Information:	Display	the	monitor	information.
•	All Reset:	Set	to	“Yes”	to	revert	all	settings	to	the	factory	default	mode.
  
						

							3-7Chapter	3:	General	Instruction
3.2	 Specifications
ModelVE258HVE258Q
Panel	Size25.0”W	(63.44m)25.0”W	(63.44cm)
Max.	Resolution1920x10801920x1080
Brightness	(Typ.)250cd/m2250cd/m2
Intrinsic	Contrast	Ratio	(Typ.)1000:11000:1
Viewing	Angle	(CR=10)160°(V)	/170°(H)160°(V)	/170°(H)
Display	Colors16.7	M(6bit	Hi	FRC)16.7	M(6bit	Hi	FRC)
Response Time2ms	(Gray	to	Gray)2ms	(Gray	to	Gray)
Satellite Speaker2W	x	2	stereo2W	x	2	stereo
Earphone OutputYesYes
Sound from HDMIYesYes
HDMI inputYesYes
DVI	inputDVI	with	HDCPDVI	with	HDCP
D-Sub inputYesYes
DisplayPort	input-Yes
Audio Line-inYesYes
Power	ON	Consumption55W55W
Tilt-5° ~ +20°-5° ~ +20°
VESA	Wall	MountingYes	(100mm	x	100mm)Yes	(100mm	x	100mm)
Phys.	Dimension	(WxHxD)595x423x219mm595x423x219mm
Box	Dimension	(WxHxD)667x527x142mm667x527x142mm
Net	Weight	(Esti.)5.0 kg5.0 kg
Gross	Weight	(Esti.)7.5 kg7.5 kg
Voltage	RatingAC	100~240V(Built-in)AC	100~240V(Built-in)
*Specifications	are	subject	to	change	without	notice.