Asus Ve245h User Guide

							
2-1ASUS	VE205/VE245/VE246	Series	LCD	Monitor	
2.1 Assembling the monitor base
To	assemble	the	monitor	base:
1.	 Have	the	front	of	the	monitor	face	down	on	a	table.
2.	 Assemble	 the	base	 and	the	arm	 by	aligning	 the	arrow	 marks	 on	the	 base	 and	
the	arm.
3.	 Fix	the	base	to	the	arm	by	fastening	the	bundled	screw.
We	recommend	that	you	cover	the	table	surface	with	soft	cloth	to	prevent	damage	to	the	monitor.
1
R e l e a s e           L o c k2
2.2 Adjusting the monitor
	For	optimal	viewing,	we	recommend	that	you	look	at	the	full	face	of	the	
monitor,	then	adjust	the	monitor	to	the	angle	that	is	most	comfortable	for	you.
	Hold	the	stand	to	prevent	the	monitor	from	falling	when	you	change	its	angle.
	You	can	adjust	the	monitor’s	angle	from	-5˚	to	20˚.
	-5˚~20˚
It	is	normal	that	the	monitor	slightly	shakes	while	you	adjust	the	the	viewing	
angle.	
•
•
•
Downloaded	from	ManualMonitor.com	Manuals 
						

							
2-2Chapter	2:	Setup

2.3   Detaching the arm/base  
(for VESA wall mount)
The	detachable	 arm/base	of	this	 LCD	 monitor	 is	specially	 designed	 for	VESA 	wall	
mount.	
To	detach	the	arm/base:	
1.	 Have	the	front	of	the	monitor	face	down	on	a	table.
2.	 Remove	the	rubbers	in	the	four	screw	holes	(Figure	1).
3.	 Use	 a	screwdriver	 to	remove	 the	two	 screws	 on	the	 arm	 (Figure	 2),	then	 slide	
out	the	arm/base	to	detach	it	from	the	monitor	(Figure	2).
1
R e l e a s e           L o ck
Arm/base
Rubbers.in.the.
screw.holes.
Figure.1 Figure.2
2
1
R e l e as e           L o c k
We	recommend	 that	you	cover	 the	table	 surface	 with	soft	cloth	 to	prevent	damage	to	the	monitor.
Downloaded	from	ManualMonitor.com	Manuals 
						

							
2-3
ASUS	VE205/VE245/VE246	Series	LCD	Monitor	

2.4  Connecting the cables
1.	 Connect	the	cables	as	the	following	instructions:
VGA
Earphone jack
HDMIAudio-inAudio-inAudio-in
VE245T
VE245NVE245H/VE246H
VE205
VGA
To.connect.the.audio.cable:	connect	one	end	of	the	audio	cable	to	the		
monitor’s	 Audio-in	port,	the	other	end	to	the	computer's	audio-out	port.	
To.connect.the.power.cord:	connect	one	end	of	the	power	cord	securely	to	
the	monitor’s	 AC	input	port,	the	other	end	to	a	power	outlet.
To.connect.the.VGA/DVI/HDMI.cable:	
Plug	the	VGA/DVI/HDMI	 connector	to	the	 LCD	 monitor’s	 VGA/DVI/HDMI	
port.
Connect	the	other	end	of	the	VGA/DVI/HDMI	cable	to	your	computer's	
VGA/DVI/HDMI.
Tighten	the	two	screws	to	secure	the	VGA/DVI	connector.
To.use.earphones:	connect	the	end	with	plug	type	to	the	monitor’s	earphone	
jack.
When	these	cables	are	connected,	you	can	choose	the	desired	signal	from	the	
Input	Select	item	of	the	OSD	functions.
2.	 Gather	all	the	cables	with	the	cable	management	slot.
•
•
•
a.
b.
c.
•
Cable.management.slot
Downloaded.from.ManualMonitor.com.Manuals 
						

							
2-4Chapter	2:	Setup
2.5 Turning on the monitor
Gently	press	the	power	 button		.	 See	 page	 1-3	for	the	 location	 of	the	 power	 button.	
The	power	indicator		lights	up	in	blue	to	show	that	the	monitor	is	ON.
Downloaded	from	ManualMonitor.com	Manuals 
						

							
3-1ASUS	VE205/VE245/VE246	Series	LCD	Monitor	
3.1 OSD (On-Screen Display) menu 
3.1.1	 How	to	reconfigure
Press	the	MENU	button	to	activate	the	
OSD	menu.	
1.
Press		(or	),	and		to	navigate	through	the	functions.	
Highlight	and	activate	the	desired	function	by	pressing	the	MENU	button.	If	
the	function	selected	has	a	sub-menu,	press		(or	),	and		
again	to	navigate	through	the	sub-menu	functions.	Highlight	and	activate	the	
desired	sub-menu	function	by	pressing	the	MENU	button.	
Press		(or	),	and		to	 change	 the	settings	 of	the	 selected	
function.
To	exit	 the	OSD	 menu,	 press	the		or		button.	 Repeat	 step	2	and	 step	
3	to	adjust	any	other	function.		
3.1.2. OSD.Function.Introduction
Spendid
This	function	contains	five	sub-functions	
you	can	select	for	your	preference.	Each	
mode	has	the	Reset	selection,	allowing	
you	to	maintain	your	setting	or	return	to	the	
preset	mode.
1.
Scenery.Mode:	best	choice	for	scenery	photo	display	with	SPLENDID™	
Video	Enhancement.
Standard.Mode:	best	choice	for	document	editing	with	SPLENDID™	
Video	Enhancement.
Theater.Mode:	best	choice	for	movie	with	SPLENDID™	Video	
Enhancement.
Game.Mode:	best	choice	for	game	playing	with	SPLENDID™	Video	
Enhancement.
Night.View.Mode:	best	choice	for	dark-scene	game	or	movie	with	
SPLENDID™	Video	Enhancement.
In	the	Standard	Mode,	the	Saturation	and	Sharpness	functions	are	not	user-configurable.
In	the	other	modes,	the	sRGB	function	is	not	user-configurable.•
•
2.
3.
4.
•
•
•
•
•
Downloaded.from.ManualMonitor.com.Manuals 
						

							
3-2Chapter	3:	General	Instruction		

2..Image.
You	can	adjust	brightness,	contrast,	
sharpness,	saturation,	position	(VGA 	only),	
and	focus	(VGA	only)	from	this	menu.	
Brightness:	the	adjusting	range	is	from	0	to	100.		is	a	hotkey	to	
activate	this	function.
Contrast:	the	adjusting	range	is	from	0	to	100.
ASCR:	turns	on/off	the	 ASCR	(ASUS	Smart	Contrast	Ratio)	function.
Sharpness:	the	adjusting	range	is	from	0	to	100.
Saturation:	the	adjusting	range	is	from	0	to	100.	
Position:	adjusts	the	horizontal	position	(H-Position)	and	the	vertical	
position	(V-Position)	of	the	image.	 The	adjusting	range	is	from	0	to	100.
Focus:	reduces	Horizonal-line	noise	and	Vertical-line	noise	of	the	image	
by	adjusting	(Phase)	and	(Clock)	separately.	 The	adjusting	range	is	from	
0	to	100.
Phase	adjusts	the	phase	of	the	pixel	clock	signal.	With	a	wrong	phase	
adjustment,	the	screen	shows		horizontal	disturbances.
Clock	(pixel	frequency)	controls	the	number	of	pixels	scanned	by	one	
horizontal	sweep.	If	the	frequency	is	not	correct,	the	screen	shows	vertical	
stripes	and	the	image	is	not	proportional.•
•
3..Color
Select	the	image	color	you	like	from	this	
function.	
Color.Temp.:	contains	five	color	modes	including	Cool,	Normal,	Warm,	
sRGB,	and	User	mode.
Skin.Tone:	contains	three	color	modes	including	Reddish,	Natural,	and	
Yellowish.	
In	the	User	mode,	colors	of	R	(Red),	G	(Green),	and	B	(Blue)	are	user-
configurable;	the	adjusting	range	is	from	0-100.
•
•
•
•
•
•
•
•
•
Downloaded.from.ManualMonitor.com.Manuals 
						

							
3-3
ASUS	VE205/VE245/VE246	Series	LCD	Monitor	

4.. Input.Select.
In	this	function,	you	can	select	your	
desired	input	source.
5..System.Setup.
Allow	you	to	adjust	the	system.
Volume:	the	adjusting	range	is	from	0	to	100.		is	a	hotkey	to	
activate	this	function.	
Aspect.Control:	adjusts	the	aspect	ratio	to	full	or	4:3.	
OSD.Setup:	
Adjusts	the	horizontal	postition	(H-Position)/the	vertical	position	
(V-Position)	of	the	OSD	from	0	to	100.	
Adjusts	the	OSD	timeout	from	10	to	120.	
Enables	or	disables	the	DDC/CI	function.			
Language:	there	are	11	languages	for	your	selection,	including	English,	
German,	Italian,	French,	Dutch,	Spanish,	Russian,	 Traditional	Chinese,	
Simplified	Chinese,	Japanese,	and	Korean.	
Information:	shows	the	monitor	information.	
All.Reset:	“Yes”	allows	you	to	restore	the	default	setting.
•
•
•
*
*
*
•
•
•
Downloaded.from.ManualMonitor.com.Manuals 
						

							
3-4Chapter	3:	General	Instruction		

3.2	 Specifications	summary	(VE246H)
Panel.TypeTFT	LCDPanel.size24"	(16:9)	wide	screenMax..Resolution1920	x	1080
Pixel.pitch0.27675	mmBrightness.(Typ.)250	cd/m2
Contrast.Ratio.(Typ.)1000:1Contrast.Ratio.(Max.)50000:1	(with	 ASCR	on)Viewing.angle(H/V).CR>10170˚/160˚Display.colors16.7	MResponse.time2	msSPLENDID™.Video.EnhancementYes
SPLENDID™.selection5	video	preset	modes	(by	hotkey)Auto.adjustmentYes	(by	hotkey)Color.temperature.selection5	color	temperaturesSkin-Tone.selection3	skin-tonesDigital.inputDVI-D	with	HDCP;	HDMI	v1.3Analog.inputD-SubAudio-in.port3.5	mm	Mini-jackEarphone.jackYesColorsBlackSpeaker.(Built-in)1	W	x	2	Stereo,	RMSPower.LEDBlue	(On)/	Amber	(Standby)VESA.wall.mount100	x	100	mmTilt-5˚~+20˚Kensington.lockYesVoltage.ratingAC:	100~240VPower.consumptionPower	On	:	<	35	W,	Standby:	<	1	W,	Power	Off:	
						

							
3-5
ASUS	VE205/VE245/VE246	Series	LCD	Monitor	

Specifications	summary	(VE245H)
Panel.TypeTFT 	LCDPanel.size24"	(16:9)	wide	screenMax...Resolution1920	x	1080
Pixel.pitch0.27675	mmBrightness.(Typ.)250	cd/m2
Contrast.Ratio.(Typ.)1000:1Contrast.Ratio.(Max.)50000:1	(with	 ASCR	on)Viewing.angle(H/V).CR>10170˚/160˚Display.colors16.7	MResponse.time5	msSPLENDID™.Video.EnhancementYes
SPLENDID™.selection5	video	preset	modes	(by	hotkey)Auto.adjustmentYes	(by	hotkey)Color.temperature.selection5	color	temperaturesSkin-Tone.selection3	skin-tonesDigital.inputDVI-D	with	HDCP;	HDMI	v1.3Analog.inputD-SubAudio-in.port3.5	mm	Mini-jackEarphone.jackYesColorsBlackSpeaker.(Built-in)1	W	x	2	Stereo,	RMSPower.LEDBlue	(On)/	Amber	(Standby)VESA.wall.mount100	x	100	mmTilt-5˚~+20˚Kensington.lockYesVoltage.ratingAC:	100~240VPower.consumptionPower	On	:	<	35	W,	Standby:	<	1	W,	Power	Off:	
						

							
3-6Chapter	3:	General	Instruction		

Specifications	summary	(VE245T)
Panel.TypeTFT	LCDPanel.size24"	(16:9)	wide	screenMax...Resolution1920	x	1080
Pixel.pitch0.27675	mmBrightness.(Typ.)250	cd/m2
Contrast.Ratio.(Typ.)1000:1Contrast.Ratio.(Max.)50000:1	(with	 ASCR	on)Viewing.angle(H/V).CR>10170˚/160˚Display.colors16.7	MResponse.time5	msSPLENDID™.Video.EnhancementYes
SPLENDID™.selection5	video	preset	modes	(by	hotkey)Auto.adjustmentYes	(by	hotkey)Color.temperature.selection5	color	temperaturesSkin-Tone.selection3	skin-tonesDigital.inputDVI-D	with	HDCPAnalog.inputD-SubAudio-in.port3.5	mm	Mini-jackEarphone.jackNoColorsBlackSpeaker.(Built-in)1	W	x	2	Stereo,	RMSPower.LEDBlue	(On)/	Amber	(Standby)VESA.wall.mount100	x	100	mmTilt-5˚~+20˚Kensington.lockYesVoltage.ratingAC:	100~240VPower.consumptionPower	On	:	<	35	W,	Standby:	<	1	W,	Power	Off: