Asus Ve225s User Guide
Have a look at the manual Asus Ve225s User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 379 Asus manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
2-1ASUS VE225 Series LCD Monitor 2.1 Assembling the monitor base To assemble the monitor base: 1. Have the front of the monitor face down on a table. 2. Assemble the base and the arm by aligning the arrow marks on the base and the arm. 3. Fix the base to the arm by fastening the bundled screw. We recommend that you cover the table surface with soft cloth to prevent damage to the monitor. 1 R e l e a s e L o c k2 2.2 Adjusting the monitor For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you. Hold the stand to prevent the monitor from falling when you change its angle. The recommended adjusting angle is from -5˚ to 20˚. -5˚~20˚ It is normal that the monitor slightly shakes while you adjust the the viewing angle. • • • Downloaded from ManualMonitor.com Manuals
2-2Chapter 2: Setup 2.3 Detaching the arm/base (for VESA wall mount) The detachable arm/base of this LCD monitor is specially designed for VESA wall mount. To detach the arm/base: 1. Have the front of the monitor face down on a table. 2. Remove the rubbers in the four screw holes (Figure 1). 3. Use a screwdriver to remove the two screws on the arm (Figure 2), then slide out the arm/base to detach it from the monitor (Figure 2). 1 R e l e a s e L o c k Arm/base Rubbers.in.the. screw.holes. Figure.1 Figure.2 2 1 R e l e a s e L o c k We recommend that you cover the table surface with soft cloth to prevent damage to the monitor. Downloaded from ManualMonitor.com Manuals
2-3 ASUS VE225 Series LCD Monitor 2.4 Connecting the cables 1. Connect the cables as the following instructions: VGA Earphone jack HDMIAudio-in Audio-in VE225T VE225N VE225D VE225S VE225H VGA To.connect.the.audio.cable: connect one end of the audio cable to the monitor’s Audio-in port, the other end to the computer's audio-out port. To.connect.the.power.cord: connect one end of the power cord securely to the monitor’s AC input port, the other end to a power outlet. To.connect.the.VGA/DVI/HDMI.cable: Plug the VGA/DVI/HDMI connector to the LCD monitor’s VGA/DVI/HDMI port. Connect the other end of the VGA/DVI/HDMI cable to your computer's VGA/DVI/HDMI. Tighten the two screws to secure the VGA/DVI connector. To.use.earphones: connect the end with plug type to the monitor’s earphone jack. When these cables are connected, you can choose the desired signal from the Input Select item of the OSD functions. 2. Gather all the cables with the cable management slot. • • • a. b. c. • Cable.management.slot Downloaded.from.ManualMonitor.com.Manuals
2-4Chapter 2: Setup 2.5 Turning on the monitor Gently press the power button . See page 1-3 for the location of the power button. The power indicator lights up in blue to show that the monitor is ON. Downloaded from ManualMonitor.com Manuals
3-1ASUS VE225 Series LCD Monitor 3.1 OSD (On-Screen Display) menu 3.1.1 How to reconfigure Press the MENU button to activate the OSD menu. 1. Press (or ), and to navigate through the functions. Highlight and activate the desired function by pressing the MENU button. If the function selected has a sub-menu, press (or ), and again to navigate through the sub-menu functions. Highlight and activate the desired sub-menu function by pressing the MENU button. Press (or ), and to change the settings of the selected function. To exit the OSD menu, press the or button. Repeat step 2 and step 3 to adjust any other function. 3.1.2. OSD.Function.Introduction Spendid This function contains five sub-functions you can select for your preference. Each mode has the Reset selection, allowing you to maintain your setting or return to the preset mode. 1. Scenery.Mode: best choice for scenery photo display with SPLENDID™ Video Enhancement. Standard.Mode: best choice for document editing with SPLENDID™ Video Enhancement. Theater.Mode: best choice for movie with SPLENDID™ Video Enhancement. Game.Mode: best choice for game playing with SPLENDID™ Video Enhancement. Night.View.Mode: best choice for dark-scene game or movie with SPLENDID™ Video Enhancement. In the Standard Mode, the Saturation and Sharpness functions are not user-configurable. In the other modes, the sRGB function is not user-configurable.• • 2. 3. 4. • • • • • Downloaded.from.ManualMonitor.com.Manuals
3-2Chapter 3: General Instruction 2..Image. You can adjust brightness, contrast, sharpness, saturation, position (VGA only), and focus (VGA only) from this menu. Brightness: the adjusting range is from 0 to 100. is a hotkey to activate this function. Contrast: the adjusting range is from 0 to 100. ASCR: turns on/off the ASCR (ASUS Smart Contrast Ratio) function. Sharpness: the adjusting range is from 0 to 100. Saturation: the adjusting range is from 0 to 100. Position: adjusts the horizontal position (H-Position) and the vertical position (V-Position) of the image. The adjusting range is from 0 to 100. Focus: reduces Horizonal-line noise and Vertical-line noise of the image by adjusting (Phase) and (Clock) separately. The adjusting range is from 0 to 100. Phase adjusts the phase of the pixel clock signal. With a wrong phase adjustment, the screen shows horizontal disturbances. Clock (pixel frequency) controls the number of pixels scanned by one horizontal sweep. If the frequency is not correct, the screen shows vertical stripes and the image is not proportional.• • 3..Color Select the image color you like from this function. Color.Temp.: contains five color modes including Cool, Normal, Warm, sRGB, and User mode. Skin.Tone: contains three color modes including Reddish, Natural, and Yellowish. In the User mode, colors of R (Red), G (Green), and B (Blue) are user- configurable; the adjusting range is from 0-100. • • • • • • • • • Downloaded.from.ManualMonitor.com.Manuals
3-3 ASUS VE225 Series LCD Monitor 4.. Input.Select. In this function, you can select your desired input source. 5..System.Setup. Allow you to adjust the system. Splendid.Demo.Mode:.turns on/off ASUS Splendid Demo function. Volume: the adjusting range is from 0 to 100. is a hotkey to activate this function. Aspect.Control: adjusts the aspect ratio to full or 4:3. OSD.Setup: Adjusts the horizontal postition (H-Position)/the vertical position (V-Position) of the OSD from 0 to 100. Adjusts the OSD timeout from 10 to 120. Enables or disables the DDC/CI function. Language: there are 11 languages for your selection, including English, German, Italian, French, Dutch, Spanish, Russian, Traditional Chinese, Simplified Chinese, Japanese, and Korean. Information: shows the monitor information. All.Reset: “Yes” allows you to restore the default setting. • • • • * * * • • • Downloaded.from.ManualMonitor.com.Manuals
3-4Chapter 3: General Instruction 3.2 Specifications summary (VE225H) Panel.TypeTFT LCDPanel.size21.5" (16:9) wide screenMax...Resolution1920 x 1080 Pixel.pitch0.248 mmBrightness.(Typ.)250 cd/m2 Contrast.Ratio.(Typ.)1000:1Contrast.Ratio.(Max.)100000:1 (with ASCR on)Viewing.angle(H/V).CR>10170˚/160˚Display.colors16.7 MResponse.time5 msSPLENDID™.Video.Enhancement YesSPLENDID™.selection5 video preset modes (by hotkey)Auto.adjustmentYes (by hotkey)Color.temperature.selection5 color temperaturesSkin-Tone.selection3 skin-tonesDigital.inputDVI-D with HDCP; HDMI v1.3Analog.inputD-SubAudio-in.port3.5 mm Mini-jackEarphone.jackYes Colors Black Speaker.(Built-in)1 W x 2 Stereo, RMSPower.LEDBlue (On)/ Amber (Standby)VESA.wall.mount100 x 100 mmTilt -5˚~+20˚Kensington.lockYesVoltage.ratingAC: 100~240VPower.consumptionPower On : < 33 W, Standby: < 1 W, Power Off:
3-5 ASUS VE225 Series LCD Monitor Specifications summary (VE225T) Panel.TypeTFT LCDPanel.size21.5" (16:9) wide screenMax...Resolution1920 x 1080 Pixel.pitch0.248 mmBrightness.(Typ.)250 cd/m2 Contrast.Ratio.(Typ.)1000:1Contrast.Ratio.(Max.)100000:1 (with ASCR on)Viewing.angle(H/V).CR>10170˚/160˚Display.colors16.7 MResponse.time5 msSPLENDID™.Video.Enhancement YesSPLENDID™.selection5 video preset modes (by hotkey)Auto.adjustmentYes (by hotkey)Color.temperature.selection5 color temperaturesSkin-Tone.selection3 skin-tonesDigital.inputDVI-D with HDCPAnalog.inputD-SubAudio-in.port3.5 mm Mini-jackEarphone.jackNo Colors Black Speaker.(Built-in)1 W x 2 Stereo, RMSPower.LEDBlue (On)/Amber (Standby)VESA.wall.mount100 x 100 mmTilt-5˚~+20˚Kensington.lockYesVoltage.ratingAC: 100~240VPower.consumptionPower On : < 33 W, Standby: < 1 W, Power Off:
3-6Chapter 3: General Instruction Specifications summary (VE225N) Panel.TypeTFT LCDPanel.size21.5" (16:9) wide screenMax...Resolution1920 x 1080 Pixel.pitch0.248 mmBrightness.(Typ.)250 cd/m2 Contrast.Ratio.(Typ.)1000:1Contrast.Ratio.(Max.)100000:1 (with ASCR on)Viewing.angle(H/V).CR>10170˚/160˚Display.colors16.7 MResponse.time5 msSPLENDID™.Video.Enhancement YesSPLENDID™.selection5 video preset modes (by hotkey)Auto.adjustmentYes (by hotkey)Color.temperature.selection5 color temperaturesSkin-Tone.selection3 skin-tonesDigital.inputDVI-D with HDCPAnalog.inputD-SubAudio-in.portNoEarphone.jackNo Colors Black Speaker.(Built-in)NoPower.LEDBlue (On)/ Amber (Standby)VESA.wall.mount100 x 100 mmTilt -5˚~+20˚Kensington.lockYesVoltage.ratingAC: 100~240VPower.consumptionPower On : < 33 W, Standby: < 1 W, Power Off: